How can a laptop monitor be converted into a desktop monitor?

Taking Acer laptop as an example, the operation steps for converting an external monitor to a laptop display are as follows:

1. Remove the LCD screen of the old notebook for use.

2. Assemble the TV components purchased online (5-in-1 driver board + remote control + high-voltage strip + screen cable + speaker).

3. Keep the shielded cable and high-voltage strip interface, and the shielded cable and high-voltage strip wiring.

4. Fix the screen.

5. Restructure the shielding aluminum foil and install the screen line.

6. Install the inner screen.

7. Install the front cover.

8. Plug in the power supply, turn on the detection, and the modification will be completed when it is lit.

No, the laptop is an output device, and it can only be used with another monitor on the laptop.

Hehe, very thoughtful, maybe I misunderstood? Do you want your desktop to use your laptop's monitor? The normal practice is to use a desktop monitor for a notebook.

If you want to use a laptop monitor, then you can only do it on the network without disassembling the laptop (maybe individual laptops have professional input interfaces.)

If you use a desktop monitor, it's much simpler.,The side of the notebook will generally have a VGA interface.,Just connect the monitor and set it up.,It should be said that all notebooks will have VGA interfaces.,Maybe I'm short-sighted.。

Addendum: Do you really want to use a laptop monitor? Notebook 17?

Is a laptop monitor that good? Forget it,The method I'm talking about is to use the network to achieve it,That is, to establish a local area network,And then use remote login and other methods to display things on the desktop,If the desktop doesn't have a monitor, you can use the TV if your TV is good,Why use notes? Forget it, you can only modify the answer once, and you can't add it.

This problem is very professional, first of all, we must solve the problem of input signal, we must make a VGA interface, and then there is the problem of LCD screen power supply, and the LCD screen power supply circuit can be directly connected to the transformer. However, it is necessary to control the input current, and the high-voltage plate will be burned if it is too large.

No way! The output of the computer VGA is the output! There's no reason to turn back!

Theoretically, it is definitely possible, and there must be masters who can do it, but to modify the notebook, the risk is relatively large, and ordinary people still don't try.

There's no way.,The notebook only has a display signal output interface.,There's no input interface.,How do you connect? If it's a sub-display and converted into a monitor,It's a desktop that can be used as a monitor.。

Accessories required for laptop screen modification monitor:

1. LCD screen.

2. A power board that matches the LCD screen backlight tube interface.

5. a button board.

6. Display shell nesting.

Connect the power board and the backlight tube, and weld the power supply connection between the power supply and the ** board. Connect the connection between the key switch and the board, and connect the screen cable between the LCD screen and the board.

It can be powered on and tested.

I can connect it. There is an interface on a laptop, the same as a desktop to a monitor, just connect it. And then, and then press the shortcut key, and look at your laptop keyboard, each brand of notebook is different, HP's is generally fn+f4, and BenQ's is fn+f7

Summary. Hello, take notebook projection as an example, desktop as a monitor, 1, first of all, we turn on the wire, and the monitor is connected to the power.

2. Then right-click on the desktop to select the screen resolution.

3. In the screen resolution page, we can see that there are two monitors.

4. When the computer is connected to two monitors, we can set the monitors. In the drop-down menus there are duplicate monitors, extended monitors, and display only in one monitor.

First, let's look at the duplicate display.

5. After clicking Copy Monitor, our two monitors will show the same thing.

6. Then we look at the extended display, after selecting the extended display, the external plane is used as an extension of the main display.

7. In the figure, we can see that the extended display is on the right side of the main display. In addition, the display in only one monitor in the drop-down menu is set to be displayed in a separate display.

Hello, take notebook projection as an example, desktop as a monitor, 1, first of all, we turn on the wire, and the monitor is connected to the power. 2. Then right-click on the desktop to select the screen resolution. 3. In the screen resolution page, we can see that there are two monitors.

4. When the computer is connected to two monitors, we can set the monitors. In the drop-down menus there are duplicate monitors, extended monitors, and display only in one monitor. First, let's look at the duplicate display.

5. After clicking Copy Monitor, our two monitors will show the same thing. 6. Then we look at the extended display, after selecting the extended display, the external plane width is used as an extension of the main display to make the chain eggplant redundant. 7. In the picture, we can see that the extended display is on the right side of the main display.

In addition, the display in only one monitor in the drop-down menu is set to be displayed in a separate display.

Do you know how to install a computer monitor, here is the content I brought about how to install a computer monitor, welcome to read!

Computer Monitor Installation Method 1:

The signal cable used to connect the monitor to the computer console: as shown below.

1. VGA signal line.

2. The connection method between the monitor and the computer host: as shown in the figure below, if there is only an integrated graphics card, use the VGA signal cable, connect the computer host with integrated graphics card at one end, and connect the display at one end.

If you have both an integrated graphics card and a discrete graphics card installed in the main computer unit, the monitor signal cable must be connected to the discrete graphics card. Because after the computer host is turned on, if the independent graphics card is detected, the integrated graphics card will be automatically blocked, and the ** signal will be output through the independent graphics card. If the wrong signal cable is connected to the integrated graphics card, the display will have no signal input.

Computer monitor installation method 2:

1. Split the monitor, the monitor screen, the monitor tray, and the monitor power supply;

2. Find a box that is a little larger than the monitor, and find a few foam strips at the same time;

3. Spread a layer of foam at the bottom of the box;

4. The front of the display faces the foam and is placed flat;

5. Then put the monitor tray, power supply and other parts into the box;

6. After checking and placing all the split parts, lay another layer of foam on them; It is then boxed and sealed with clear glue.

1.How to install a computer monitor.

2.How to place the computer monitor correctly.

3.How to install the Dell computer monitor driver.

4.How to change the computer monitor.

5.How to wall mount a computer monitor.

6.How to use a computer monitor as a TV.

7.How to watch a computer monitor as a TV.

8.How to connect a computer monitor to a TV.

9.How to convert a note monitor into a desktop monitor.

10.How to use a computer monitor as a TV.