The computer crashes and the computer crashes the computer and the computer crashes the problem

It is recommended that you check the reinstall system.

I'm sure it's been a long time since your computer has been fully cleaned.

First, the CPU temperature is too high, mainly because the CPU fan has too much dust and miscellaneous lines, blocking the aluminum plate (the aluminum under the fan emits hot air) and cannot be ventilated normally.

Second, there are too many temporary files on the C drive of the computer. For example, surfing the Internet, turning on and turning off the computer, installing and uninstalling things, office patch residual files, etc., will produce temporary files, resulting in a slow computer, and if there are too many startup programs, it will cause a crash.

Third, if your computer is a discrete graphics card, then you should also clean up the dust on the graphics card, even if the CPU temperature is around 20, but the graphics card's fan (if there is a fan) does not rotate or is too slow, it will cause the screen to get stuck, sluggish, or crash or blue screen.

Fourth, if there is a problem with the memory, the computer often has a blue screen, the blue screen ** is 000000 and so on**, you can use a dollar bill (preferably new, too long can not be used) to wipe the memory module, if there is no effect, how is it not a memory problem.

Fifth, the power supply voltage of the computer is unstable, and it will also cause a crash if it is lower than the requirements of the computer.

Sixth, if there is a problem with the motherboard, there will also be a crash (if it is a crash), if it is serious, it will not be able to turn on, the display will not be connected to the signal and the motherboard will not have a "drop" sound.

You can wipe the memory module first, such as the fourth method, in cleaning the CPU fan, after cleaning it up, you should install silicone, if there is still this problem, it is the "bridge" of the motherboard There is a problem, you can only return to the factory for repair, and the general repair of the computer can not be repaired.

Hope it works for you.

If you have any questions, please ask.

1. There may be static electricity or negative voltage on the motherboard, the reason is that there is more dust, 2. There is a problem with the memory module, wipe it with an eraser.

3, there is a problem with your power supply, or you take off the battery on the motherboard to turn on 4, the parts you replace may be an inferior capacitor, it is best to find a better repair station to check it5, upgrade to see how much space your board has, if it is not big, it is not necessary, and now the hardware is updated quickly.

The initial judgment is that it is a memory problem.

There is also the ability to detect the motherboard, which may be a little faulty.

Take the big computer city to test it.

Crash,This problem is a lot of things,Can cause a crash,,Now the motherboard is not expensive,Wouldn't it be nice to change one??

Generally, there is a problem with the memory, and it is not expensive to change the memory.

It's also possible that there are some stubborn viruses at all levels of your computer, right?

Get a good radiator. It may be that the temperature is too high.

It should be that there is a problem with the motherboard, and there is no warranty after repair? Let's go to the store again.

Redo the system! The easiest, quickest, and most effective way!

Go to Safe Mode to rule out software issues, and if there are any problems, check for hardware issues and CMOS.

No reloading.

In the end, it doesn't work, please take a look at it.

1. The resources are insufficient, and the hardware resources do not meet the automatic down machine required for the system to start, (it is generally possible for very old machines).

2. The key process is hung, it may be that the user application process causes the unwanted software to be deleted by trying it in safe mode.

3. Caused by Trojan virus, disconnect the network and kill the virus in safe mode, it is really not possible to reinstall.

4. Check the system log to see if there are a large number of error messages.