Why is the internet speed stuck at noon?

I think it's because there are more people online.

If the operator is fine, it may be that you have accidentally set the computer speed limit, (for example: there is a speed limit ** in the fast broadcaster**, and the limit has been set once**, it will not be changed The next time you turn on the machine will limit all your network speeds, not just **speed; There are a lot of ** devices that are. Also, your IP address is leaked, and someone maliciously throttles your IP speed.

To put it simply, a computer network is a "computer group" composed of two or more computers connected together, and a corresponding "communication facility" to form an integrated system. Computers can do many things, and although computers are getting faster, more and more powerful, and more and more capacities, there are still some fly in the ointment.

For example, the office is equipped with a state-of-the-art computer for everyone, but the availability of printers has become a problem. If only one or several computers are equipped with printers, those who do not have printers need to copy the files to the computer with a printer to print when printing, not only the resources shared on the network are not only printers, but also hard disks, discs, plotters, scanners, and all kinds of software, text and various information resources.

The reasons why the internet speed freezes at night are as follows:

1. The load on the chassis of the broadband operator is too large. At night, the number of users who use the Internet for filial piety increases, and the chassis runs at full load, resulting in the network becoming stuck.

3. The voltage is unstable. The voltage is unstable, causing the router to run abnormally and the network speed to slow down.

4. Poor optimization of broadband allocation. Broadband operator optimization is required.

The reasons why the internet speed freezes at night are as follows:

1. The load on the chassis of the broadband operator is too large. At night, the number of users surfing the Internet increases, and the chassis runs at full load, resulting in network jamming.

2. LAN users are trapped in accessing the Internet, which increases the number of devices. At night, multiple users surf the Internet at the same time or carry out BT under the spine load of the cherry ruler, and the ridge seepage will cause the network to become stuck.

3. The voltage is unstable. The voltage is unstable, causing the router to run abnormally and the network speed to slow down.

4. Poor optimization of broadband allocation. Broadband operator optimization is required.

Since most of the network operators now provide a shared network architecture, when the number of people who share the network bandwidth reaches a certain number, it will lead to everyone's network speed being slow, and users are concentrated in surfing the Internet at night, resulting in network congestion. Due to the bandwidth limitation of the server room, the number of server visits in the computer room continues to increase at night, and the use is frequent, resulting in overload of the server and slow down the network speed.

The second is that the wireless network is "rubbed into the network".

Here's a solution for anti-rubbing netting:

1.Check the client in the browser page into the router**,**usually written on the router manual, enter the user name and password, enter the operation page, click "DHCP server", view the "client list", will show all the devices connected to the wireless router, if there is an unknown device, that is, it is "rubbing the network".

2.After resetting the password and finding that someone is rubbing the network, you can record the "MAC address" of the device that rubs the network, and then reset the password in the "basic settings" column of the "wireless parameters", in order to increase the difficulty of cracking, the password is best composed of numbers, letters and characters.

3.Blacklist the "MAC address" of the network, turn on the "MAC address filtering" function, and enter the "MAC address" of the device into the dialog box, and the router will automatically block the device, blacklist it, and can no longer connect to the wireless router.

4.Enhanced security level wireless router generally has three types of security, divided into "WEP", "WPA" and "WPA2", the existing technical means, "WEP" and "WPA" are easy to be cracked by "rubbing the network software", users can select "WPA2" in the "Wireless Parameters" in the "Open Security Settings" column, the wireless router will be upgraded to the highest security level, to prevent being "rubbed against the network".

First, you'll want to look at your computer configuration.

Secondly, you see if there is a route, connect to a few computers (unroute, dial with a cat stand-alone).

Thirdly, if your home is an old community, it is more common for the Internet to be slow (high ping delay) during the peak Internet access period at night. Because the ADSL line of the old community is not good because of the age, even if it has been replaced with a new line.

Finally, if the above situations are excluded, then you can contact the 10000 integrated dispatch center (commonly known as: broadband class), and let them use the system to check your home's Internet data (like how long you go online each time, how much Internet traffic, and the current Internet line conditions they can measure, but they will not tell the user), if it is normal, you can reset your cat (there is a reset hole behind the cat, find a toothpick, and reach it without turning off the cat, 10 seconds) If the network speed is still not good, Let them help you flash the port again, if it doesn't work, help you report for repair. Let the master check the broadband outside line (the master may not come to the door, sometimes it is ** contact).

Reasons for poor internet speed at night:

Evening is the peak period of Internet access, office workers get off work, students get out of school, they will use the Internet, resulting in a busy network, so the Internet speed is not good at night.

Solution: Bring your ID card to the business hall to handle the broadband upgrade business, increase the bandwidth, and relieve the network pressure.

It's useless to find Netcom, that's because that time of night is the peak time for Internet access, and Netcom is already relatively poor, even if you are alone with a network cable, it will still be affected.

At night, it's really a little slow because the gateway is blocked, why is there some** server can't work, but the speed of 60 is really slow It is recommended to check whether your system is open or something like an electric donkey, if it doesn't work, redo the system, if it's still slow, then replace your ** cable with a network cable So that the speed will increase.

Are you a friend there Isn't it Guangrao ?

Is the network at home connected by a router? If so, when other line users use a lot of network resources, you will get stuck, such as when ** things. It's like multiple taps in one pipe, and if one family uses more, the other homes will have less water.

Not recommended though. You can next "P2P Terminator". But this is too grandson...

If you're not afraid of retribution, you'll try it next... It's a thing that controls the speed of each home on the local area network.。。。

。Good, good, good.

No wonder the Internet speed at home is always stuck, it turns out that there is a trick here, and the Internet speed will be doubled immediately.