Why the hole in the inflatable basketball does not leak

Because its ball eye is a kind of rubber pad, when the ball needle is pumped, the rubber pad will be washed away by the huge pressure of the air pump, and when the air pump is pulled out, the air in the ball will give the rubber pad an unexpected force, causing the rubber pad to be restored to a closed state, therefore, the basketball ball eye does not seem to leak, unless its rubber pad is old and damaged, and it cannot play the role of sealing.

Because the basketball has a leak valve, when the gas is rushed, the internal air pressure of the ball is greater than the outside, and the leak valve will block the air hole to prevent the gas from leaking, so that the basketball will not leak, and so will the other balls.

When pumping with a ball needle, the rubber pad will be washed away by the huge pressure of the air pump, and when the air pump is pulled out, the air in the ball will give the rubber pad an unexpected force, causing the rubber pad to return to a closed state, therefore, the basketball ball eye does not seem to leak, unless its rubber pad is damaged.

Generally, basketballs leak air from the inflatable holes, but new basketballs leak slowly.

After the basketball is full of air, you will naturally run away, depending on the speed of the run, and you should quickly pull out the gas needle after it is full. If the gas runs too fast, consider fixing it or replacing it with another one.

Summary. Hello, kiss, I am honored to answer for you The basketball hole inserted many times will not cause the basketball to leak, because the air chamber of the basketball is inflated through a special valve, and the valve position is generally at the top of the basketball, not the side or bottom. The location of the jack is on the side or bottom and does not affect the tightness of the air chamber, nor does it affect the inflation and leakage of the basketball.

However, if the jack is not properly positioned or the hole is not the right size, the air chamber or pin may be damaged when the pin is inserted, which will cause the basketball to leak. So, be sure to pay attention to the location of the jack and the size of the hole when the jack, so as not to damage the basketball, I hope my answer can help you, I wish you a happy life

Hello, kiss, I am honored to answer for you The basketball hole inserted many times will not cause the basketball to leak, because the air chamber of the basketball is inflated through a special valve, and the valve position is generally at the top of the basketball, not the side or bottom. The location of the jack is on the side or bottom and does not affect the tightness of the air chamber, nor does it affect the inflation and leakage of the basketball. However, if the jack is not properly positioned or the hole is not the right size, the air chamber or pin may be damaged when the pin is inserted, which will cause the basketball to leak.

Therefore, when inserting the leaky die hole, you must pay attention to the position of the jack and the size of the hole, so as not to damage the basketball, I hope my answer can help you, I wish you a happy life, and I wish you a happy life.

What about 10 times? This number of times is also a kiss that will not leak.

Good. Evaluated.

The air chamber of the basketball is made of rubber or other materials, and the number of times the basketball hole is inserted does not directly cause the basketball to leak. However, if the jack is not positioned properly or if the insertion hole is too long or too sharp, it can cause the air chamber to rupture or damage the valve, which can cause the basketball to leak. In addition, if the basketball is used for a long time or stored in an improper way, it may also cause the basketball to leak.

Therefore, it is recommended to check whether the air pressure is normal before using the basketball, and if the stove letter finds an air leak, you can make the hidden code wheel be repaired with a special glue or rubber strip for basketball, or replace the valve. In addition, when storing basketballs, you should also pay attention to the mold preservation environment to avoid being affected by sharp objects or high temperatures.

Summary. Hello, if the basketball air hole is inserted correctly, it will not leak, but if the air hole is inserted incorrectly, it may lead to air leakage, and the basketball will also produce air leakage after playing for a long time.

Hello, if the basketball pores are inserted correctly, there will be no air leakage, but if the posture of the air hole is inserted into the incorrect posture, it may lead to air leakage, and the basketball will also produce air leakage after playing for a long time.

If the basketball inflator is leaking, you can buy some small patches to repair the tires, and then use the patches to block the basketball inflators. This method of filling the leakage is convenient and fast, but the timeliness is not long, and it can only be used for emergency relief; You can also drip the melted candle oil Songji in the basketball inflatable port, and poke it into the inflatable vent after the candle solidifies. If the air leakage of the inflator of the basketball is very serious, it is recommended to replace the basketball without the need to repair it.

Basketball air leakage is a relatively common problem that can be fixed in the following ways:

Use valve patches or glue for repair. You can buy a special valve patch or use a general glue, clean the air leak, and then apply the patch or glue evenly to cover the air old and the door, and flatten it tightly, waiting for the glue to dry before use. This method is simple and practical, and it can effectively avoid gas leakage.

Replacement valve cores. If the valve itself is damaged or the pores are cracked too much to repair using patches, you can consider replacing the valve core. You'll need to buy a valve core to match the basketball, remove the old one, and install a new one.

Make sure the valve core is in the correct position and orientation when installing.

Send in for repair or replacement of valves. If the valve damage is more serious, or it is not convenient for you to repair it yourself, you can consider taking the basketball to a repair shop for repair, or simply replace it with a new valve. Repair shops can clean, repair or replace damaged valves to ensure that airtightness is restored.

Replacing the valve with a new one can also completely solve the gas leakage problem.

Check for other air leaks. In addition to the valves, other parts of the basketball such as the leather surface and wireframe may also be damaged, slippery or ruptured, resulting in gas leakage. You can inspect the surface of the ball with your hands while inflating, or submerge the basketball in water to see if air bubbles escape, you can find other air leaks and fix them.

These methods can effectively fix the air leakage problem of the basketball and return the basketball to normal use. If the problem is more complicated, it is recommended to send the basketball to a repair shop for professional repair.

How to deal with basketball air leakage There are several ways to deal with basketball air leakage: 1. Find the location of the air leak: If the basketball is leaking, the first step is to find the location of the air leak.

Usually this can be done by applying soapy water or a mixture of water and detergent to the surface of the basketball to find air leaks. 2. Repair the air leak: Once you find the location of the air leak, you need to repair the leak at that location.

If the air leak is very large, you can fix it with some basketball-specific repair tools. These tools can be purchased at sporting goods stores or on the internet. 3. Replace the in-ball airbag:

If the air leak is too large to be repaired with a repair tool, then you need to replace the airbag inside the basketball. To do this, you need to buy some basketball airbags and use a work-to-use tool to remove the old airbags and install the new ones. 4. Precautionary measures:

In the future, there are some precautions you can take to avoid the basketball leaking again. For example, keep the basketball dry, don't overexpose the basketball to the sun, and avoid hitting hard objects when the basketball hits. In conclusion, if the basketball is leaking, you need to take immediate steps to fix it so that it doesn't cause more damage.

The basketball valve replacement method is as follows:

Every time you inflate, clean and moisten the air needle, so that it is not easy to damage the basketball air valve, the air valve is damaged or there is dust and debris will lead the shed to shout jogging gas, under normal circumstances, the ball air valve bubbles, jogging gas phenomenon, as long as the water (vegetable oil is better) drip air hole with the air needle a few more poke to clean the air valve will be good, and then you can only replace the ball mouth.