How to repair a broken cigarette lighter, how to repair a broken car cigarette lighter?

As follows:

1. Loose, the cigarette lighter cannot be stuck after pressing, resulting in the cigarette lighter cannot be energized.

Solution: Use a non-conductive body such as a bamboo skewer to move the spring blade outward to restore the spring blade to its original position.

2. The smoker itself is faulty and cannot be used.

Workaround: Buy the same type of cigarette lighter directly online or in store.

Note that it should be the habit of most people to use the cigarette lighter jack as a car power supply, but you should avoid using electrical appliances with more than 120W in the car. Because the maximum current that the cigarette lighter circuit can withstand is generally 10A (there are also 20A). According to the calculation of the 12V voltage of the cigarette lighter jack, if the total power of the on-board electrical appliances exceeds 120W, then the cigarette lighter circuit will be overloaded.

It is also important to note that do not continue to draw power from the cigarette lighter socket when the vehicle is turned off, otherwise the battery will easily run out of power and will not be able to start the car again.

Loose, the cigarette lighter cannot be stuck after pressing, resulting in the cigarette lighter cannot be powered onSolution: Use a non-conductive body such as a bamboo skewer to move the spring blade outward to restore the spring blade to its original position.

The cigarette lighter itself is faulty and cannot be used. Workaround: Buy the same type of cigarette lighter directly online or in store.

Precautions for the use of car cigarette lighters.

It is necessary to check whether the cigarette lighter is stuffed with foreign objects from time to time, so as not to damage the car cigarette lighter, if the vehicle has a protective cover of the cigarette lighter, it should be covered in time, and some advanced vehicles also have a spare cigarette lighter interface in the trunk, but also pay attention to whether there are foreign objects entering.

The general maximum power of the cigarette lighter is 120W, and more than this value is easy to cause the cigarette lighter to be overloaded, causing various dangers such as burning the focus of the cigarette, so when using external equipment, we must see the maximum power clearly, and try to use it less than 120W.

The car cigarette lighter is broken:1. Loose, after pressing the cigarette lighter, it can not be stuck, resulting in the cigarette lighter can not be energized Solution: Use a non-conductive body such as a bamboo skewer to turn the spring blade outward to restore the spring blade to its original position.

2. The smoker itself is faulty and cannot be used.

Workaround: Buy the same type of cigarette lighter directly online or in store.

3. Repeated unplugging and unreasonable use caused a short circuit in the wire and burned the fuse Solution:

The first step is to find the fuse box of the electrical appliances in the car, some models are in the box, some are under the center console, the second step, the lid of the box, and find the position of the cigarette lighter fuse against the fuse position indicator map pasted on the inside of the box cover

Step 3: Use the included fuse puller, take out the blown fuse, and replace it with a new or spare cigarette lighter fuse.

If the cigarette lighter card holder is broken, you can adjust the card of the cigarette lighter card holder yourself to see if it is because of the card problem. If you don't need to replace the cigarette lighter assembly, ** at 20 yuan to 300 yuan a, depending on the model.

If it is because the fuse of the cigarette lighter is burned out, this situation only needs to be replaced with the car backup insurance. If there is no spare fuse, the ** of the fuse is generally about a few dollars, and you can buy a fuse with the same voltage and current as the original factory.

If it is because of the problem of the cigarette lighter line, if you go to the 4S shop for maintenance, it is generally to replace the cigarette lighter line group directly, ** is uncertain, and the specific need to see the charging standard of the 4S shop and the model.

Check where the fuse of the cigarette lighter is, replace it and use it.

If the cigarette lighter of the car is broken, it is very likely that the safety of the cigarette lighter is burned, you can open the hood, find the fuse box, and then find the corresponding insurance of the cigarette lighter, see how safe it is, and then take a spare safety and plug it in.

Summary. Hello, I'm honored for your problem, the cigarette lighter is broken, it is generally not repaired, it is recommended to replace it directly. Cigarette lighters are generally between 50-100 yuan.

Hello, I'm honored for your problem, the cigarette lighter is broken, it is generally not repaired, it is recommended to replace it directly. Cigarette lighters are generally between 50-100 yuan.

The principle of the cigarette lighter is that it is heated to expand and contract, when the cigarette lighter is pressed into the world, it is not heated to a certain temperature, and the temperature-sensing bimetal sheet inside can be used to distinguish the pin limb to normally jam the groove of the cigarette lighter's head. But when the cigarette lighter is heated to a certain temperature and degree, the bimetal sheet will open when heated and release the cigarette lighter.

In general, the fuse is burned. If you go to a repair shop to replace a fuse, it is generally about 10 yuan. Some are even free of charge.

You can take a look at this cigarette lighter when you are maintaining.

1.Car cigarette lighters can break when:1.

2.loose, and the cigarette lighter cannot be stuck after pressing, resulting in the cigarette lighter not being able to power on.

3.Solution: Use a non-conductor such as a bamboo skewer to move the spring sheet outward to restore the spring blade to its original position; 2.The smoky lead orange fog detector itself malfunctioned and could not be used.

4.Solve the Fang Chang law: buy the same model of lighter directly online or in a physical store; 3.Repeated pulling, unreasonable use leads to short circuit of wires and blown fuses.

5.Solution: First find the fuse box of the electrical appliances in the car, some are in the model box, and some are under the center console; Find a safe location for the lighter; Using the fuse puller provided, remove the blown fuse and replace it with a new or spare cigarette lighter fuse.

If the clamp spring in the cigarette lighter seat is loose and the foot is skewed, so that the cigarette lighter cannot be clamped after being depressed, you can use a non-conductive body such as a bamboo skewer to toggle the spring blade outward to restore the spring blade to its original position. If the line is cut and the fuse blows due to repeated plugging and unplugging, the fuse can be replaced directly.

When you find that the cigarette lighter on the car cannot be powered, you can try to connect it with the cigarette lighter of the same model. If it is normal, it is a problem with the igniter itself and can be replaced directly. If you can't use it, it's probably the fuse of the cigarette lighter, which can be replaced by yourself. Here's how:

1.Find the fuse box for the electric round hole artifact in the car. The brand and model of the car are different, and the location of the safety box is also different, some are in the storage box, and some are under the center console;

2.Open the lid of the fuse box and find out the position of the fuse of the cigarette lighter according to the fuse position indicator included in the lid;

3.Using the included fuse puller, remove the blown fuse and replace the flutter with a new or spare cigarette lighter fuse.

Using a cigarette lighter jack as a power source for a vehicle should be a common practice for most people, but appliances with more than 120 watts of power should be avoided in the car. Because the maximum current that the cigarette lighter circuit can withstand is generally 10A (also 20A). According to the 12V voltage of the cigarette lighter socket, if the total power of the on-board electrical appliances exceeds 120W, the cigarette lighter circuit will be overloaded.

It should also be noted that do not continue to draw power from the cigarette lighter socket when the vehicle is turned off, otherwise the battery will easily run out and the car will not be able to start again. If the power of the on-board appliance is too high and the circuit is overloaded, the possibility of battery scrapping increases considerably.

Millions of car purchase subsidies.