Where is the vibration set after the fingerprint unlock of the Apple mobile phone is wrong?

The steps are as follows:

1.First of all, find [Settings] on your iPhone and tap the settings gear icon.

2.Select [Language & Input] to cancel the various vibration and power consumption functions of the virtual keyboard;

3.On the Settings page, tap Sound;

4.Make sure that [Vibrate on touch] is not checked, that is, disable the touch vibrate function.

1. First open the "Settings" app on Apple's home screen.

2. Find the "General" option in the settings list.

3. Then find the "Touch ID & Passcode" option in the general list and click to enter.

4. In the passcode setting interface, click on the "Touch ID" option.

5. In the Touch ID settings interface, please turn on the iPhone Unlock and App Store options, and then tap the "Add Fingerprint" option.

6. Next, the system prompts us to put our finger on the home button and start fingerprint recording.

7. When we put our finger on the home button, we will see that there is a display of the recorded fingerprint animation. When setting up fingerprint recording, touch it once, then remove your finger. It is important to note that the fingers are kept clean and in a proper touch position.

8. After recording the fingerprint information of your finger, you need to set the posture of pressing the home button with your finger to unlock it. Everyone may touch the home button differently with their fingers, so use the way you're used to it.

9. Next, it is the same as recording fingerprints before, but you should pay attention to the direction and angle of finger touch as if you usually press the home button.

10. After the settings are completed, click the "Continue" button.

Fingerprint recognition requires a few points:

1. The home button is clean and free of attachments.

2. The fingers are clean and free of attachments.

3. Use the right fingers.

4. It is best not to sweat on the fingers, and sweat will also affect.

Open Settings - TouchID & Password - Set a simple password - and enter your fingerprint.

Nowadays, fingerprint recognition is not so advanced, and there are many things to pay attention to.

1. First find the "Settings" icon on the home screen of your phone, click to open, 2. In the settings list, find the "General" option, click to enter, 3. In the general list, find the "Touch ID and Passcode" option, click to enter, if you are entering here for the first time, the system should prompt you to set a password to lock your phone and unlock it. This password is OK.

It can be a simple 4-digit password or a complex combination of numbers and letters. Enter the same password twice.

4. Then in the list of Touch ID and password, find the "Touch ID" option, click to enter, 5. Then click the "Add Fingerprint" option, then the system will prompt you to put the finger you want to set the fingerprint on the "Home screen" button, please touch the home screen with your finger.

Home button, repeatedly tap with your finger until the system completes its fingerprint recording, and when the fingerprint is recorded, it will continue to record the edge fingerprint of the finger. Since usually the fingers touch the main screen.

The position of the home button will be different each time, so the system will prompt the edge of the finger to increase the accuracy of fingerprint recognition.

edge fingerprint for calibration. Repeatedly tap the home button with the edge of your finger until the system records a full fingerprint on the edge of your finger.

Record information. 6. When the fingerprint recognition setting animation turns red, the system will prompt that the fingerprint setting is successful, click the "Continue" button, 8. Lock the iPhone after the setting is completed, and you can try to unlock the phone with your finger.

You can set it in Settings - Sound. Here's how to set it up:

Tool Material: Apple 6S mobile phone.

1.Click the phone settings icon to enter the user settings page.

2.Once there, click on the sound option to go to the next page.

3.On the sound page, click on the reminder of the reminder to enter.

4.Once you're in, click on the Vibrate option to go to the next page.

5.At this point, there will be multiple vibration modes, just choose one.

This is the system itself, if it doesn't vibrate, it may be that there is something wrong with your phone.

Setup steps: 1. First open the "Settings" app on the home screen of Apple 6.

2. Find the "General" option in the settings list.

3. Then find the "Touch ID & Passcode" option in the general list and click to enter.

4. In the passcode setting interface, click on the "Touch ID" option.

5. In the Touch ID settings interface, please turn on the iPhone Unlock and App Store options, and then tap the "Add Fingerprint" option.

6. Next, the system prompts us to put our finger on the home button and start fingerprint recording.

7. When we put our finger on the home button, we will see that there is a display of the recorded fingerprint animation. When setting up fingerprint recording, touch it once, then remove your finger. It is important to note that the fingers are kept clean and in a proper touch position.

8. After recording the fingerprint information of your finger, you need to set the posture of pressing the home button with your finger to unlock it. Everyone may touch the home button differently with their fingers, so use the way you're used to it.

9. Next, it is the same as recording fingerprints before, but you should pay attention to the direction and angle of finger touch as if you usually press the home button.

10. After the settings are completed, click the "Continue" button.

You can set it in Settings - Sound. Here's how to set it up:

Tool Material: Apple 6S mobile phone.

1.Click the phone settings icon to enter the user settings page.

2.Once there, click on the sound option to go to the next page.

3.On the sound page, click on the reminder of the reminder to enter.

4.Once you're in, click on the Vibrate option to go to the next page.

5.At this point, there will be multiple vibration modes, just choose one.

My P6 fingerprint unlock error has not vibrate, and many methods searched on the Internet have not worked, so I experimented one by one;

I really found it.,Set --- general --- auxiliary function --- vibration.,You can turn on vibration after opening;

At the same time, you have to turn on the settings --- sound--- turn on the above two switches;

This is in the settings.

Sound settings. Information settings.

It doesn't vibrate, and it can't be called out. Unless Apple's new system in the future will add this feature!

Apple 6S fingerprint unlock.

1. Open the main interface of your phone and select "Settings".

2. After entering the settings, select "Touch & Password".

3. After entering the fingerprint settings, open the three functional options shown in the diagram.

4. Click "Add Fingerprint" below, and after the input is completed, you can use the fingerprint recognition function.