One of oppo s mobile phones, fingerprint unlocked on the back, full screen, which model is it

At present, there are R9, R7 Plus, N3 (N5207, N5209) mobile phones that support fingerprint unlocking, and other models do not support fingerprint unlocking.

How to set fingerprint recognition:

1. Go to Settings - Fingerprint & Screen Lock - Select Add Fingerprint;

2. Place your finger on the touch area on the back of the phone, lift your finger after feeling the vibration, and repeat 6 times.

3. Set other available unlock passwords when the fingerprint cannot be operated or recognized, and choose one of them (pattern unlock or simple password) to complete the setting.

N3: The back of the mobile phone is added to the press-type fingerprint recognition module, which is more convenient than the traditional hanging wipe type, and the recognition rate is higher, and the screen can be directly lit up and unlocked by tapping the fingerprint, and 5 fingerprints can be stored, and functions such as desktop unlocking, encryption software, and guest mode are supported.

R7 Plus: The back of the mobile phone is added with a push-type fingerprint recognition module, which is more convenient than the traditional hanging and wiping type, and has a higher recognition rate, and can directly light up the screen and unlock it by tapping the fingerprint, and can store 5 fingerprints, and supports desktop unlocking, encryption software and other functions.

OPPO product review:

Today's hardware stacked on smart phones,System software optimization is also a very important part of consumers,OPPO as a well-known domestic high-end brand,Its system is also relatively mature,And this time the new colorOS system interface,Based on Android development,According to the official introduction,Compared with the previous version of the system,ColorOS starts faster,Response is faster,The system is more stable。

The lock screen interface of the coloros system is very easy to use, slide the finger up to unlock the interface, swipe your finger left to enter the photo function interface, and swipe your finger right to add some small plug-ins of the lock screen interface. In addition, if you double-tap the lock screen, you can quickly turn off the screen.

The main interface, the main interface of the coloros system adopts the skeuomorphic style, which makes the system application icons have a strong three-dimensional sense and high recognition. The overall look is very simple. In addition, it is not difficult to find that the coloros system does not use the secondary menu that many Android systems currently have, which is conducive to the background management of the program, accelerates the running speed of the mobile phone, and brings users a very fast system experience.

Drop-down menu and notification bar interface, it is not difficult to find that the system's drop-down menu uses a frosted glass effect; The notification bar can be set up for shortcut switches, including: Bluetooth, wifi, network and other functions. When the WeChat message pops up, we can directly swipe left to close the message directly, and swipe right to open the message directly.

R11 and A79 are both rear fingerprint unlocks, and they are also full screens.

You can use the fingerprint password to unlock quickly, and you can add up to 5 finger fingerprints. After turning on the fingerprint password, wake up the mobile phone and press the position indicated on the screen to complete the unlocking.

1. Enter fingerprints:

1) If you didn't enter your fingerprint when you first set up your phone, go to Settings > Password & Security) Fingerprint, Face & Password (Fingerprint) Add Fingerprint, and then follow the on-screen instructions.

2) If you don't have a lock screen password, please follow the on-screen prompts to set a lock screen password and then add your fingerprint.

2. Fingerprint: Enter the mobile phone Settings >Password & Security) Fingerprint, Face & Password > Fingerprint > Click the fingerprint name you want to delete to delete the fingerprint or modify the fingerprint name.

3. Fingerprint animation style:

ColorOS 6 and above, you can choose different fingerprint unlock animation styles > Password & Security) Fingerprint, Face & Passcode > Fingerprint > Fingerprint Animation Style.

4. Screen off unlocking:

For ColorOS 6 and above, go to Settings > Password & Feast Security) Fingerprint, Face & Passcode > Fingerprint > Screen Unlock, and you can choose to show or turn off the fingerprint icon under the screen off.

If you enable both the lock screen password and the fingerprint password, you will be prompted to enter the lock screen password after the fingerprint password fails to be recognized multiple times.

In order to further protect the security of your mobile phone information.

And it is easier to remember the lock screen password, ColorOS 6 and above system versions, the new "72 hours have not used the lock screen password, please enter the lock screen password" mechanism. If you have enabled both the passcode and the biometric passcode (face or fingerprint) and have not entered the passcode for 72 consecutive hours, you need to verify the passcode once, and you can use it normally after entering the passcode. This is Android.

The mechanism of other Android phones.

They all have this mechanism.

Hello,Dear,I'm glad to help you answer,There are OPPO A92S OPPORENO6Just these two,At present, some models use the side fingerprint unlocking scheme,The power button and fingerprint unlocking function are realized in the module with only the width of the middle frame on the right side of the fuselage,Not only can you turn the screen on and off、Turn on and off and other operations,You can also unlock quickly,Rich in functions,And save space,Greatly reduce the impact on the appearance,Convenient and beautiful。 At present, some models adopt the side fingerprint unlocking scheme, and the power button and fingerprint unlocking function are realized in the module with only the width of the middle frame on the right side of the fuselage, which can not only turn on and off the screen, turn on and off the machine, etc., but also quickly unlock, rich in functions, and save space, greatly reduce the impact on the appearance, convenient and beautiful. I hope the above can help you, dear, and I wish you a happy life<>

How to set the fingerprint password.

You can use the fingerprint password to unlock quickly, and you can add up to 5 finger fingerprints. After turning on the fingerprint password, wake up the phone and press the position indicated on the screen to complete the unlock.

1. Enter fingerprints: If you didn't enter your fingerprints when you first set up your phone, go to Settings > Fingerprints, Face Pants Ruler & Password> Fingerprints> Add Fingerprints and follow the on-screen instructions. If you don't have a passcode, follow the on-screen prompts to set one.

2. You can choose to use your fingerprint for related functions, and replace the added fingerprint with the lock screen password or other pure passwords.

3. Fingerprint: Go to Settings > Fingerprint, Face & Passcode > Fingerprint > Click the fingerprint name you want to delete to delete the fingerprint, or modify the fingerprint name.

4. Animation style: ColorOS 6 and later versions, go to Settings > Fingerprint, Face & Passcode > Fingerprint > Animation Style You can choose different fingerprint unlock animation styles.

5. Screen Unlock: ColorOS 6 and later versions: Go to Settings > Fingerprint, Face and Wang Gao Password > Fingerprint > Screen Unlock You can choose to display the fingerprint icon or turn off the fingerprint icon under the screen off.

This is available for all OPPO models.

First of all: Tap to enter [Settings] on the OPPO desktop, then switch to the "General" settings tab at the top, and then find and tap to enter the [Fingerprint & Screen Lock] settings. After that, go to the fingerprint settings, then click to enter [Add Fingerprint], and then follow the prompts to complete the fingerprint entry.

Then: Place the finger you want to enter the fingerprint on the back of the phone, remove it, and repeat 6 times. When you're done, then go to the "Lift Your Finger" operation, place the same finger on the touch area on the back of the phone and move it away, repeating the same 6 times.

Finally: You can enter multiple fingerprints according to the above method, after the entry is completed, you can turn on the required function under [Use fingerprint for], you can unlock or encrypt the program, after opening the fingerprint [unlock], you can use the fingerprint to unlock in the future.

The oppo fingerprint is at the bottom of the screen.

On the right power button, just put your finger on it.