How to maintain the newly bought fancy billiard cues

Both glue and leather are consumables and need to be purchased separately. (2) The main tools are: file, sand paper, paper cutter and leather head retainer.

3) Replacement method 1: Cut off the protective leather head with a blade to expose the copper hoop and wood. 2. Trim with a knife so that the end face of the copper hoop and the wood is in the same plane. 3. Grind the end face and the low plane of the leather head with sandpaper.

4. Use a blade to scrape an appropriate amount of glue and evenly coat it on the low plane of the end face and leather head. 5. Fix the leather head to the club with a retainer. If you don't have a retainer, you can use a hard tool to gently hit the clubhead; Or stand up and tap the ground with the leather tip straight down.

In the case of ball maintenance, it is mainly the attention when using it and the maintenance after use. 1.Of course, when using, it should be handled gently, and it cannot be placed against the wall at will, which will lead to deformation.

2.Club leather heads should be replaced in a timely manner. 3.

A professional boom operator should be used for club storage, and long-term storage in the club box will also cause the club to deform. 4.Usually the club should be maintained with club oil.

The main steps are as follows: Oiling the rod step.

1. Tools: dry cloth, rod oil steps: (1), rod oil 1, clean billiard cues with a dry cloth; 2. Rod oil, two to three drops of rod oil is sufficient

With a dry cloth in one hand and a rod oil in the other, the dry cloth covers the mouth of the bottle, and the bottle is quickly reversed. Repeat the above steps, put two to three drops of rod oil on the dry cloth (two), and the sandalwood will shine after the ebony is oiled and oiled, and the place without oil will be boring and dumb. If the ebony color is dull, it needs to be oiled and maintained. After oiling the ebony part, don't forget that the bottom of the billiard cue also needs to be wiped Finally, use the same cloth to quickly wipe the bevel of the signboard a few times to avoid uneven accumulation of oil on the signboard, so that the signboard accumulates oil and affects the appearance.

3) The front branch does not need too much oil and does not need to be oiled too often, so after oiling the ebony, the remaining rod oil on the cloth is enough to maintain the front branch, and there is no need to add additional rod oil. Oil the front branch, be careful not to let the rod oil on the skin head, otherwise the skin head will be scrapped. Whether the front branches of maple need to be oiled, it is recommended to try to do as little or not as possible, and the specific reference standard is whether the front branches are withered and hard.

4) After the natural drying of the billiard cue is oiled, put it in a ventilated place, and after five to ten minutes, wipe off the oil on the ash part of the front branch with a dry cloth, and continue to dry the ebony part naturally (it is best to use a boom device).

1. It needs to be oiled, and the ebony is shiny after oiling, and the place that is not oiled is boring and dumb. If the ebony color is dull, it needs to be oiled and maintained.

2. Oiling the ebony, including oiling the clamping part of the front branch, after oiling the ebony part, don't forget that the bottom of the billiard cue also needs to be wiped.

3. Finally, use the same cloth to quickly wipe the signboard bevel a few times to avoid uneven accumulation of rod oil on the signboard, so that the signboard accumulates oil stains and affects the appearance.

1. First of all, when we use billiard cues in daily life, we should pay attention to the maintenance of billiard cues, and often wipe billiard cues with a clean dry cloth to prevent water from deteriorating billiard cues. Be careful not to touch the pool cue with water.

2. After using the billiard cue, the billiard cue should be placed in a good environment, and the billiard cue can be placed on a special billiard cue rack, while keeping the environment dry to avoid inadvertently hitting and breaking the billiard cue.

3. To oil billiard cues, especially after the paint on the surface of billiard cues disappears, as for the type of oiling, you can choose by yourself, there are many types on the Internet, all of which can be selected. When the billiard cue feels bad, and the opponent is worn and becomes unsmooth, you need to polish the billiard cue and choose a delicate frosted paper.

4. If the head of the billiard cue is damaged, you need to choose a special pencil sharpener to treat the billiard cue to prevent further deterioration, and also increase the feel and accuracy of the billiard cue.

5. Don't use billiard cues too hard, after all, billiard cues are wooden. Do not hit the ball with a club with an unglued leather tip. Once the copper ring, thread buckle and other parts are loose, they should be repaired as soon as possible to avoid damage to the wood and cannot be remedied.