Novice figure white model coloring guidance, figure white model coloring problem

Refer to the encyclopedia entry, which is very detailed.

1.The ratio of paint to thinner depends on your use, if you spray it with a spray gun, paint: thinner = 1:

4 or 1:5If you draw with a pen, it's 1:

1。However, in reality, it is really troublesome to adjust this proportion very accurately, if it is sprayed, shake the bottle after the paint, if it is more translucent, it means that it has been relatively thin, if it is still not transparent, the paint is still too thick, if it is a pen painting, a small area is directly used with a pen to dip the solvent to dip out of the pigment, a large area with a large amount of words on the same amount of mix, in short, more rely on the feeling, more than a few times to pay too much attention to the proportion, this is a little experience of mine. If the paint has been adjusted, if it is found to be too thick when spraying, you can add a little solvent into it, if it is too thin but not too thin to be saved, you can pull the airbrush a little farther, so that when the paint particles fly to the surface, there will be more solvent volatilization to reduce the flow marks.

2.If the character's eyebrows are originally equipped with no water stickers, they are painted with a face pen. You can go to the art store to buy the thinnest oil brush, more than 2 yuan, and you will lose if you sell those dozens of Tianmiya.

If you are not skilled in face painting, you can use water-based paint, and if you are not satisfied with it after drying, you can gently wipe it off, but there will be a little trace after repeated wiping, so it is recommended to use enamel paint, the color effect is better than water-based paint, and it is also convenient to wipe with solvent, leaving no traces and dissolving the primer.

3.When coloring, if it is not convenient to hold in your hand, you can use crocodile clips (sold in stationery stores) and bamboo skewers (barbecue skewers, supermarkets have) homemade pliers to clamp some parts that do not hinder your painting, such as the internal water outlet or something, if there is no such position, you can also use a bamboo stick to stick a little 502 to stick to the inside does not affect the position of the painting, anyway, the traces of assembly in the future will not be visible inside.

The above is a little bit of my experience, if you are interested in communicating, you can add 1311186991, by the way, I will complain about ls, white mold is not an unattainable thing.

Paint with a spray gun or spray can.

Details, a lot of them are now pasted with water. Draw it yourself, and you will definitely have cups if you have no experience.

Of course, the parts should be inserted into very small wires or bamboo skewers. How can there be a forehead that is held in the hand?

ps, do a good job of ventilation when coloring, or it is not good for the body.

I'm talking about the Japanese version of the white film resin, that is, GK is the resin white film! You said that the white model of the figure feels so cheap, but the OEM is talking about the domestic one! The genuine will not be a handmade white film!

The figure is PVC material, and the white film resin is GK, in fact, a long time ago, the figure really said GK, but then PVC was not appropriate, and now the figure is generally considered to be PVC and does not refer to GK! Real GK is very expensive, thousands to tens of thousands, generally is.

First of all, the genuine GK that is not colored generally becomes a semi-finished product! Why is that expensive. Because the semi-finished product of the white model figure is something unattainable.

The white model belongs to the figure that is only given to the character designer inside.

Because you have to polish and color yourself, and then you don't have a lot of back to a lot of films, at most a dozen! And it is necessary for professional teachers to make the film personally!

Coloring GK is called finished products, super expensive thousands to hundreds of thousands, that is, you think about the semi-finished GK are very expensive, not to mention the finished product, just like you said Coloring assembly is the most important process, is in urgent need of professional skills, you think about coloring is not so simple on the coloring, if it is good, gradient glasses and so on are the key Coloring can be said to be the most powerful place, coloring also has to be a success! If it's miscellaneous, no matter how good the film is, it won't work! Therefore, the finished products are all lascivious lifelike on the teacher, and the number is very small, which is equivalent to a limit, so the GK of the finished products is often sky-high!

Of course, the above is the original Japanese version.

There are also foundries in China, but they are much lower than the genuine **, there is no comparison, when the same reason is that the finished product is much more expensive than the semi-finished product.

There are also foundries in the mainland or Hong Kong, anyway, as long as it is not officially issued by Japan, **only about 400-1,000 yuan! Of course, this also depends on the mainland or Hong Kong OEM, and also depends on the depth of craftsmanship.

Finally, about what you said about GK, is it easier to save than PVC's, workmanship, and look better?

This problem is obvious.,Let's not talk about preservation.,It's a penny.,Resin and PVC materials are different.,The resin material is the best material for the current figure.,The best way to reflect the character's demeanor and clothes folds and so on! But because it's not generally expensive, and it's not a super fanatical figure fan who generally doesn't collect resin, it's really unacceptable! Therefore, the pvc figures that fans generally start with now,** has been greatly reduced, and the workmanship is now becoming more and more exquisite, and good figures are about 600-1000, and the workmanship ecology has nothing to say.

Therefore, I generally play pvc figures!

The above is the comparison between genuine PVC and genuine resin, except for domestic foundry resin!!

It's resin, it's generally polyurethane material, the advantage of this thing is that it's not afraid of banana water and thinner, it's not good to spray, the paint is washed and the paint is gone, the hardness of GK is very high, and the relative is relatively brittle, it is recommended to play when the weather is hot, it is easy to break in winter, and the workmanship looks at the general E2046 in Hong Kong (the quality of the GK white mold of E2046 is uneven, and it is very good, and some are very poor) and the dragon essence stone on TB and others. If it's good-looking, if it's not good-looking, will you buy it?

Tools, pens, knives, sandpaper or something, if the white film is defective, it may be necessary to use a copper branch hand drill or something

The glue is just a slit glue from Tamiya

Before painting, look at each part against the light to see if there are any bubbles, if there are any, pick it up with a pen knife, and then mix 502+ talcum powder (equivalent to mending soil, if you use it directly) to fill it up. If there are bubbles, it is ...... to be seen after spraying

Then first the plain group (part of the part of the good), there is a place to pay attention to, if deformed, put it in the hot water bath, bend it out and dry it, if there is a gap in the combination, you can apply a layer of petroleum jelly (hand cream or something) at the tenon (so to speak) and then squeeze a little fill of soil into it, squeeze, and remove the squeezed out of the fill soil after drying.

Spraying general small parts, eyes will use a face pen, large area with a spray gun, paint with water-soluble Tamiya and Gaia and oily guns, you can choose, of course, pay attention to the matching solvent. Specifically, you can ask the owner of the model shop

Hope it helps, if you have a shortage, you said that I will make up for it! (By the way, the above skills are all introduced by "Model Soul", if you are interested, you can take a look, and sometimes there are tutorials for white film.......)There's also a piece on the 71st of this month.,Anyway, this is universal.