What kind of device does a car carburetor have? What does it do?

1. The car will not be used, it has been eliminated, and there are still on the motorcycle.

2. The carburetor is a relatively simple oil supply system, which is mainly composed of three parts: float chamber, plunger and shell, of which the plunger part controls the oil intake and the float chamber reserves fuel volume.

2. The fuel can be automatically replenished, as long as there is fuel in the tank, it can achieve quantitative supply, and the auxiliary help can only atomize the fuel into gas when the engine is running, which plays the role of oil control. Therefore, the carburetor is a relatively simple passive fuel supply system, which does not have the role of atomizing gasoline, and can only atomize the fuel into gas with the help of the engine.

3. The carburetor also has two special adjustment screws, one of which controls the minimum speed of the engine, which is called the idle adjustment screw, and the other controls the fuel mixing ratio of the carburetor, called the mixture adjustment screw.

The carburetor has five devices, starting device, idle device, medium load device, full load device and acceleration device, their role is to vaporize the gasoline as much as possible according to the needs of the engine in different situations, and mix it with air into a combustible mixture in a certain proportion, and enter the cylinder for combustion in time.

It looks like it's using atomized gasoline.

<>First of all, the carburetor.

It is an economic component of the engine, it is a monolithic element, and there is no EFI type to say this. Secondly, not all engines are carburetor, (you can understand EFI as a carburetor that is disassembled, the throttle.)

Fuel injection and control, these can be found if you put them in the carburetor, but the control unit is not computerized, but mechanical pressure, which can be said to be a kind of macro control).

Today's cars use electronically controlled fuel injection technology, which is automatically adjusted by computers, but twenty years ago, Poussin.

The old Jetta was still the main force on the street, almost every car was equipped with a carburetor, everyone bought a second-hand car to see the quality, and always had to observe whether the carburetor was good or not.

In the early days of automobiles, the device that could adjust the air-fuel ratio was called a "carburetor", and now some motorcycles, chain saws, lawn mowers and other small gasoline engines.

You can still see it. In terms of structure, it is composed of float mechanism, nozzle, measuring hole, throat, throttle, air chamber, mixing chamber, etc., and is functionally divided into five parts: main oil supply device, idle device, acceleration device, concentration device, and starting device.

The air drawn in by the engine passes through a pipe inside the carburetor, which has a hole that connects to a small tank where the fuel is stored.

When air passes through at high speed, a pressure difference is created between the pipe and the small tank containing the fuel, allowing the fuel to be automatically sucked into the pipe.

Because air is a gas and fuel is a liquid, the flow rate is different because the body constitution is different, and the former is about 25 times that of the latter. Once the fuel enters the pipe, it is struck by the high-velocity air current, and if you look inside the carburetor, you will see that the fuel becomes an "aerosol" and mixes well with the air.

The advantage of carburetor is that it has a simple structure, low cost, and is very durable, so it will be prosperous for a long time, in addition to the standard equipment of cars, motorcycles, agricultural machinery, and airplanes are also used.

If the carburetor fails, it should also be checked as a priority to see if the carburetor is not cleaned properly, and you can go to a professional maintenance organization to clean it.

He is a part of the car's oil supply system, also known as the heart of the engine; The function of the carburetor is to atomize the gasoline through the inhaled air, and the speed of the car is to relate the mixed gas generated by the carburetor and adjust accordingly to play the role of atomizing the fuel and making the parts inside the car run normally.

The function of the carburetor is to atomize gasoline and mix it with air to form a combustible mixture, which is then fed to individual cylinders.

The carburetor on the car is a fuel supply system that is able to control the amount of fuel intake; He can provide gasoline to the car, can make the car engine work normally, can ensure the normal operation of the car, can adjust the engine speed, let the parts of the car run normally, and atomize the fuel.

It is a relatively simple oil supply system, which is a conversion device that converts liquids into gases; It can ensure the normal operation of the engine, gasoline before entering the engine to maintain good combustion conditions, can be said to be the heart of the engine, it can improve the engine starting performance, to adjust the engine speed.

Refers to the economic element of the engine, which belongs to a kind of mechanical part. It has the effect of atomization, which can ensure the fluidity of the air, has the effect of air intake, can automatically match the concentration, and can also convert the liquid into gas, and the effect is quite wide.

It is an oil supply system in the interior of the car; It is mainly used to control the amount of fuel intake, reserve the amount of fuel, and when the gas concentration into the cylinder block reaches a certain level, it will improve the maneuverability of the engine.

The carburetor of the car is a relatively simple oil supply system, which is mainly composed of three parts: float chamber, plunger and shell, of which the plunger part controls the oil intake, and the float chamber reserves the amount of fuel. At this time, the combustible gas mixture entering the cylinder block becomes thicker, which in turn plays a role in improving the engine starting performance. The ratio of air quality to fuel mass is called the air-fuel ratio.

The structure of the carburetor can be divided into five devices: A: starting device; Idle speed device; medium-load devices; full-load device; Acceleration device.

The function of the carburetor is: according to the needs of the engine in different situations, the gasoline is vaporized, and mixed with air in a certain proportion into a combustible mixture The role of the carburetor is to vaporize the gasoline according to the needs of the engine in different situations, and mix it with air into a combustible mixture in a certain proportion, and enter the cylinder in a timely and appropriate amount.

The role of starting device, idle device, medium load device, full load device, acceleration device and carburetor is to vaporize gasoline according to the needs of the engine in different situations, and mix it with air into a combustible mixture in a certain proportion. It is the engine that emits maximum power.

A carburetor is a mechanical device that mixes a certain proportion of gasoline with air under the action of vacuum generated by the operation of the engine. The carburetor is a delicate mechanical device that uses the kinetic energy of the inhaled air stream to atomize gasoline. The carburetor will automatically mix out the corresponding concentration according to the different working state requirements of the engine, and output the corresponding amount of mixture, in order to make the mixture mix more uniformly, the carburetor also has the effect of atomizing the fuel for the normal operation of the machine.

It is the mechanics of a car. It works a lot. It can mix oil and air together. But its efficiency is very low, and the degree of pollution is very large. All in all, it can provide a way to supply oil.

In fact, it is to adjust the valve switch, which can ensure that the air is mixed with gasoline, and finally adjust the speed of the engine, its main role is to let the air enter the cylinder and then provide power for the car, mainly for us to be safer when driving.

The carburetor is a mixture formed by fusing gasoline with air, mainly for oil supply, acceleration and starting.

It is just a device of the car, and it is also a system of the car. The gasoline is vaporized in different situations, which can give some power to the vehicle. It can provide some power to the vehicle, but also provide the vehicle with some emergency equipment, and provide the vehicle with sufficient mixture.

Let the engine run normally, but also make the engine free of any damage to the function. And it can be used normally even in a flat state. Some bad things are not possible.

There will also be no large amount of smoke. It can save fuel. The carburetor is the key component that will affect the performance of the whole car.

Carburetor it is a very delicate configuration. It works by passing the air inhaled by the car and then replacing it with a fluid atomizer.

It is through this machine that the fuel is more sufficient, and then some gas can be added to achieve a faster engine. What it does is make the car go faster.

A carburetor is a mechanical device that mixes gasoline and air in a certain proportion after a vacuum is generated in the operation of an automobile engine. This device is not only the most sophisticated configuration among the many parts of the engine, but also a part called the "heart" of the engine. What it does:

The role of the carburetor is to atomize gasoline by using its fluidity through the inhaled air. Because gasoline does not enter the combustion chamber of the engine directly through the duct. Gasoline must be mixed with purified air to form a mist mixture so that it burns easily when it enters the combustion chamber.

So, send the gasoline to the oiler. Therefore, the carburetor produces a gas mixture with a matching concentration and quantity depending on the engine speed. Therefore, when the engine rotates at different speeds, such as idling, low, medium and high, the concentration and amount of the mixture through the carburetor** are adjusted accordingly.

The carburetor is a fuel supply device in the engine of automobiles and locomotives, and its function is to mix a certain proportion of gasoline with air by using the vacuum negative pressure generated by the engine work, and then supply the mixture to the combustion chamber of the engine. It takes about 15 kilograms of air for one kilogram of gasoline to burn completely, so it is important that the oil and gas are mixed. The carburetor usually includes a fuel chamber, a choke damper, an idle measuring hole, a principal measuring hole, an air throttle hose and an accelerator pump and other parts.

Answer: The structure of the carburetor can be divided into five devices: A: starting device; Idle speed device; medium-load devices; Full load.

Place; Acceleration device. The role of the carburetor is to vaporize the gasoline and mix it with the air according to the needs of the engine in different situations.

It is mixed into a combustible mixture in a certain proportion. Enter the cylinder in a timely and appropriate amount.

1.Damper This is a device that helps the engine increase its starting performance, and its working principle is simple, when the damper handle is pulled open, the choke is closed, and then the combustible gas mixture entering the cylinder block will become thicker, which will play a role in improving the starting performance of the engine. 2.

Float chamber The float chamber of the carburetor has many parts, mainly including floats, float needles, main measuring holes, and idle measuring holes. The float and float needle mainly play the role of controlling the fluid level of the carburetor, and the idle measuring hole is the oil passage to ensure the minimum speed of the engine, and the main measuring hole is the main oil passage in the process of engine speed, which can complement each other and ensure the most basic fuel supply demand of the engine. 3.

Plunger assembly The plunger assembly of the carburetor is also composed of multiple parts, including plunger, oil needle, circlip and return spring. In these parts, the oil needle controls the amount of oil intake, the plunger controls the amount of air intake, the two of them can be said to be a pair of good partners who complement each other, if there is a contradiction, then the engine will be underfed or overnutrition, and the most direct manifestation is the inability to work and fart the exhaust pipe. In addition to the above parts, the carburetor also has two special adjustment screws, one of which controls the minimum speed of the engine, called the idle adjustment screw, and the other controls the fuel mixing ratio of the carburetor, called the mixture adjustment screw, only these two screws are adjusted together, and the idle speed and combustion state of the engine can achieve the best effect.

The construction of the carburetor can be divided into five devices: the starting device; Idle speed device; medium-load devices; full-load device; Acceleration device. The role of the carburetor is:

According to the needs of the engine in different situations, the gasoline is vaporized and mixed with air in a certain proportion to form a combustible mixture. Enter the cylinder in a timely and appropriate amount.

starters; Idle speed device; medium-load devices; full-load device; Acceleration device.

The function of the carburetor is to vaporize the gasoline according to the needs of the engine in different situations, and mix it with air in a certain proportion to form a combustible mixture. Enter the cylinder in a timely and appropriate amount.

It is divided into four major devices, starting device, thickening device, idle device and main oil supply device. Among them, the starting device includes parts such as choke damper, the thickening has a plunger and a main measuring hole, and the idle device has a mixing ratio adjustment true valve and an idle air measuring hole. The main oil supply device includes the float chamber oil level control valve and float, as well as the main foam pipe and other components.

Answer: The structure of the carburetor can be divided into five devices: A:

starters; Idle speed device; medium-load devices; full-load device; Acceleration device. The function of the carburetor is to vaporize the gasoline according to the needs of the engine in different situations, and mix it with air in a certain proportion to become combustible.

Gas mixture. Enter the cylinder in a timely and appropriate amount.