What is the role of the throttle? What is the main function of the throttle?

By controlling the amount of pedaling, the engine throttle opening is controlled, the air intake is controlled, and the computer controls the oil volume, so as to control the speed of the engine.

Throttle, also known as "damper", "throttle". Refers to a control device that controls the power (thrust) of an engine. In piston aero engines, the throttle controls the throttle opening of the carburetor to control the amount of cylinder filling, which determines the engine's power output.

On gas turbine engines, the throttle controls the metered fuel flow at the fuel regulator, which determines the thrust generated by the engine.

The throttle position is controlled by the driver in the cockpit by operating the throttle stick, which is transmitted to the carburetor or fuel regulator on the engine through the lever, rocker arm, torsion tube, steel cable, pulley, fan wheel and other control system components. In an airplane, the throttle stick maneuver always pushes forward to increase the power (thrust) and pulls back to decrease the power (thrust).

Hello, happy with your question. The main function of the car throttle is to accelerate the car, and if you don't use the accelerator, the speed of the car is the original speed, which is very slow. Therefore, the role of the car throttle is mainly to accelerate the car.

The lower the throttle pressure of the car, the greater the fuel intake of the engine and the faster the vehicle speed.

The accelerator pedal of the automobile engine is generally controlled by the pedal, also known as the accelerator pedal, which is a device for controlling the oil supply of the automobile engine.

The control of the accelerator pedal should be done with the right heel on the cab floor as a fulcrum, the sole of the foot lightly on the accelerator pedal, with the ankle extension and flexion action, pedal down or relax. When stepping on the accelerator pedal, apply gentle force and lift gently.

When starting the engine, do not press the accelerator pedal all the way down, slightly above the idle throttle as well. At the start, refueling should be slightly before the clutch linkage point, and the throttle opening should be small to medium. Relax the clutch and step on the accelerator closely, and the action is agile.

Pay attention to safety when driving, look

The function of the throttle lock is to turn off the power, which is used when the engine is turned off and landing, and it is also useful when landing. The electric throttle lock value is set to 0, and the oil throttle is set to 0 because the engine must remain idle when the engine is turned off and landing, so the throttle servo lock position must be adjusted, which cannot be 0. The oil engine locks the throttle and is called throttle

Hold, completely closed is called throttle

cut, the motor doesn't matter.

Yes, the amount of fuel supplied to the combustion chamber by changing the carburetor through the throttle, thereby changing the output power and torque of the engine while changing the speed. So the most straightforward way to say is to change the speed!

The amount of fuel supplied to the combustion chamber by the throttle is changed by changing the carburetor, thereby changing the engine output and torque at the same time. So the most straightforward way to say is to change the speed!

To put it simply: the throttle controls the opening of the throttle. The throttle valve is on the engine intake manifold.

Rotundity. With the different throttle openings, the amount of mixed gas of oil and air is controlled, so as to control the engine power. That is, the speed of rotation.

To put it simply, the throttle is a device to control the speed, and when the engine is doing work, the throttle can control the amount of engine energy, so as to control the running speed of machinery and equipment.

The power output of the engine is controlled (increased or decreased) by the amount of oil and air intake.

Increase or decrease the amount of fuel intake to control the speed change of wheel speed.

The throttle is used for acceleration, and if you don't use the throttle, you are using the car's original idle speed. Now it's because you've just learned to drive, first the pile, then the field, so you don't need to gas pedal! Coaches generally consider the throttle to be dangerous, especially for novices!

For the pile test, the throttle is not important! Some of the venues are on the throttle, and the road test must be done with the throttle!

Of course, it is used to take revenge on society, and it can also kill the enemy.

The throttle controls the amount of fuel supplied to the engine.

The throttle is used to speed up while driving.

Car throttle? Step on the accelerator to accelerate.

Powering the car and increasing the speed of the car

1. The main function of the car throttle is to accelerate the car. If the throttle is not full, the speed of the car is the original speed, which is very slow. Therefore, the main function of the car throttle is to accelerate the car.

The accelerator pedal of an automobile engine is generally controlled by a pedal, also known as the accelerator pedal, which is a device for controlling the fuel supply of the automobile engine. 2. When operating the accelerator pedal, the right heel should be stepped on the cab floor as the fulcrum, and the sole of the foot should be lightly stepped on the accelerator pedal, and stepped or relaxed with the extension and bending of the ankle. When pressing the accelerator pedal, press lightly and lift slowly.

Release the clutch, press the throttle tightly, and move quickly.

A car's accelerator is a device on the car's internal combustion engine that controls the amount of fuel. The effect is so great that without the throttle, the car cannot function properly.

General essentials: lightly step on the slow lift, accelerate in a straight line, use soft force, should not be too hasty, toe kung fu, do not tremble.

The accelerator pedal only controls the throttle, and now the EFI engine, only controls the amount of air intake.

The principle of automobile oil front rush door is: 1. By controlling the amount of pedaling, the engine throttle opening and air intake are controlled, and the computer controls the oil volume, so as to judge the pure control of the engine speed; 2. After stepping on the accelerator, the throttle opening will increase, and the increase of the throttle opening will increase the air flow into the intake, and at this time, the combustion heat release of the combustible mixture will also increase, resulting in an increase in the work of the gas on the piston, and the result is an increase in the engine speed; 3. The control of the accelerator pedal should be based on the right heel on the floor of the cab as a fulcrum, and the sole of the foot should be lightly stepped on the accelerator pedal, and the ankle joint should be extended and flexed, stepped down or relaxed. When stepping on the accelerator pedal, apply gentle force and lift gently.

The main functions of stepping on the accelerator pedal are: 1. Control the throttle opening of the engine by controlling the amount of pedaling, control the air intake, and control the oil volume of the computer, so as to control the speed of the engine; 2. The throttle is also known as the "damper" and "throttle". Refers to a control device that controls the power (thrust) of an engine.

In piston aero engines, the throttle controls the throttle opening of the carburetor to control the amount of cylinder filling, which determines the engine's power output. On gas turbine engines, the throttle controls the metered fuel flow at the fuel regulator, which determines the thrust generated by the engine. 3. The throttle position is controlled by the driver in the cockpit by controlling the throttle lever and transmitting it to the carburetor or fuel regulator on the engine through the lever, rocker arm, torsion tube, steel cable, pulley, fan wheel and other control system components. In an airplane, the throttle stick maneuver always pushes forward to increase the power (thrust) and pulls back to decrease the power (thrust).

The throttle makes a big difference. When I was studying subject two, I didn't think the throttle was too useful. But it wasn't until I got to the third that I really appreciated the role of the throttle.

In the structure of a car, the accelerator pedal is called the "accelerator pedal". In driving a car, when we need to accelerate or face uphill, we have to press the accelerator pedal deeply to increase the power and torque of the engine. It is also commonly known as "come on".

Stepping on the throttle plays a major role: 1. By controlling the amount of pedaling, it can control the opening of the engine throttle, control the air intake, control the oil volume by computer, and control the engine speed; 2. The throttle is also known as the "throttle" and "throttle". It refers to the control device that controls the power (thrust) of the engine, in a piston aero engine, the throttle control the throttle opening of the carburetor to control the filling amount of the cylinder, thus determining the output of the engine; In a gas turbine engine, the throttle controls the metered fuel flow of the fuel regulator, which determines the thrust generated by the engine; 3. The position of the throttle is controlled by the driver operating the throttle stick in the cockpit, and is transmitted to the carburetor or fuel regulator of the engine through the operating system components such as the joystick, rocker arm, torsion tube, cable, pulley, and fan wheel.

On a crash plane, the throttle stick is always operated by pushing forward to increase power (thrust) and pulling back to decrease power.