Is JDG pipe a galvanized pipe? What kind of tube is a JDG tube?

What is JDG pipe material.

1. JDG pipe is a kind of wire threading pipe, just like plastic wire threading PVC pipe.

and PE pipes, 301 or 304 stainless steel.

and Q235 carbon steel pipe metal conduit, are wire conduits.

2. The JDG pipe is made of galvanized steel pipe.

and thin-walled steel pipes, which are suitable for intelligent building integrated wiring systems.

3. JDG pipe is a replacement product that replaces various traditional wire conduits such as PVC pipe and SC pipe, and is a breakthrough innovation in the field of building electrical using new materials and technologies.

JDG is a compacted galvanized thin-walled wire pipe, which is connected by the pipe fitting jacking wire to tighten the pipe to achieve a tight connection.

KBG is a crimped galvanized thin-walled conduit, which is connected with crimping pliers.

Pipes and fittings are pressed out of small pits and tightly connected.

JDG KBG pipes are used with joints, and if the product needs to be bent, it can be connected with JDG KBG elbows.

There are six specifications of JDG KBG pipe specifications, and the thickness corresponding to different specifications is also different, and the thickness is generally from to.

Except for the maximum wall thickness of 16, the rest of the JDG pipes are the largest.

Not exactly, although they are all galvanized, the thickness of JDG and galvanized steel pipes is not the same at all. JDG can only be called thin-walled conduit.

In electrical engineering, JDG pipe belongs to the compacted galvanized thin-walled wire pipe (the material of the pipe is electrogalvanized, and it also belongs to the category of galvanized pipe).

JDG pipes should be very wide in wire wiring construction, and there are more and more application scenarios, and the following is a detailed introduction to what the specific uses of JDG pipes are.

JDG pipe is a replacement product to replace various traditional wire conduits such as PVC pipe and SC pipe, and is a breakthrough innovation in the selection of new materials and technologies in the construction electrical field. The JDG pipe uses the crossover grounding wire of galvanized steel pipe and thin-walled steel pipe, which overcomes the shortcomings of the construction mess and large construction loss of the general metal conduit, and also deals with the problems of poor fire resistance and difficult grounding of PVC pipe. Because the cost of JDG pipes has increased compared with general pipes, many parts of the construction are mostly used for inductive wiring, fire wiring and other construction.

How to choose JDG tubes.

1.We need to check whether the pipe body is flat, if the surface of this kind of pipe body has creases or uneven state, it will lead to a short service life and low strength of the pipe, so it must be carefully inspected at the time of purchase.

2.Secondly, we should pay attention to whether the cross-section of the JDG pipe is lubricated, the more lubricated the cross-section, the better the quality of the JDG pipe, and the JDG pipe with non-lubricated cross-section will affect the use and bring trouble to the wiring.

3.In terms of brand, try to choose big brand manufacturers to buy, today's brand battle is fierce, brand good quality and after-sales will have a relative advantage, after the above introduction, I believe we have a specific understanding of how to buy JDG tubes. Choose a regular manufacturer to buy JDG tubes, choose the specifications and types you need, so that you can buy satisfactory products.

The above is the introduction of the use of JDG tubes, I hope it can help you after reading it. JDG pipe is a new type of pipe, which has a good protective effect on wires, and is often used in corrosive environments such as strong acid and strong alkali.

JDG pipe (sleeved set galvanized steel conduit, rigid metal flat conduit for electrical installation) is a kind of latest conduit for the protection of electrical circuits. The connecting sleeve and its metal accessories are wires and pipes composed of screw tightening connection technology, without cross-grounding, welding and threading, and the appearance is silvery-white or yellow. It is a replacement product to replace all kinds of traditional wire conduits such as PVC pipes and SC pipes, and uses galvanized steel pipes and thin-walled steel pipes to cross the grounding wire, which overcomes the shortcomings of complex construction and large construction loss of ordinary metal conduits, and also solves the problems of poor fire resistance and difficult grounding of PVC pipes.

Introduction to the connection method of JDG pipe.

1. Connection between pipes: first plug the conduit and the straight pipe joint into the position, and continue to tighten the set screw with a set wrench until the nut cap falls off.

2. The connection between the pipe and the box: unscrew the claw nut of the threaded joint and place it on the inner wall of the wiring box, and use a set wrench to clamp the claw nut and the hexagon nut inside and outside the junction box. Then connect the conduit with the other end of the threaded joint, and the process is the same as that of the conduit and the straight pipe joint.

The main connection method.

1) Pipe-to-tube connection: first insert the conduit and the straight pipe joint tightly and position, and continue to tighten the set screw with a set wrench until the "neck" is broken.

2) The connection between the pipe and the box: unscrew the claw nut of the threaded joint and place it on the inner wall of the junction box, and use a set wrench to clamp the claw nut and the hexagon nut inside and outside the junction box. Then connect the conduit with the other end of the threaded fitting, and the process is the same as the connection between the conduit and the straight pipe fitting.

The difference between JDG pipe and SC welded steel pipe is the thickness and anti-corrosion method.

The diameter of the JDG pipe is the outer diameter, and the diameter of the welded pipe is the inner diameter.

JDG pipes are galvanized on both sides, and welded pipes are divided into galvanized and ordinary.

The thickness of 20 and 25 JDG pipes is, the thickness of 15 and 20 welded pipes is generally speaking, JDG pipes can be used for open laying and buried in concrete, and buried pipes need welded pipes and anti-corrosion treatment.

JDG tube execution of the standard code late annihilation accurate reference.

Conduit systems for electrical tardling installation of dentonized GBT electrical tardling Part 1

GB Conduit Systems for Cable Management Part 21: Special Requirements for Rigid Conduit Systems

No, this one is produced by galvanized strip with the following wall thickness!

Summary. JDGL replaces PVC pipes and SC pipes and other traditional wire conduit replacement products, which is a breakthrough innovation in the field of building electrical using new materials and technologies. The JDG pipe adopts the crossover grounding wire of galvanized steel pipe and thin-walled steel pipe, which overcomes the shortcomings of complex construction and large construction loss of ordinary metal conduit, and also solves the problems of poor fire resistance and difficult grounding of PVC pipe.

Because the cost of JDG pipes has increased compared with ordinary pipes, they are mostly used for integrated wiring, fire wiring and other construction in the construction.

Hello, JDG pipe (sleeve tight galvanized steel conduit, rigid metal flat conduit for electrical installation) is a kind of latest conduit for the protection of electrical circuits. The connecting sleeve and its metal accessories are wires and pipes composed of screw fastening connection technology, without cross-grounding, welding and threading, and the appearance is silver withered white or yellow.

JDGL replaces PVC pipes and SC pipes and other traditional wire conduit replacement products, which is a breakthrough innovation in the field of building electrical using new materials and technologies. The JDG pipe adopts the crossover grounding wire of galvanized steel pipe and thin-walled steel pipe, which overcomes the shortcomings of complex construction and large construction loss of ordinary metal conduit, and also solves the problems of poor fire resistance of PVC pipe and difficulty in grounding silver. Because the cost of JDG pipes has increased compared with ordinary pipes, they are mostly used for integrated wiring, fire wiring and other construction in the construction.