How to turn on the heater in the Civic, how to turn on the heater in the Civic air conditioner

Automotive air conditioners mainly use two functions: cooling and heating. Civic air conditioners use automatic air conditioners. Take the 10th generation Civic as an example, explain how to use the air conditioning system, when using the air conditioner, find the air conditioning switch and enable (on off) to turn on the air conditioning system, if you need to turn it off, you can press the off button.

At this time, the most basic common sense when using air conditioners. After the air conditioner is turned on, if there is a need to open the front windshield to defrost or rear windshield heating, you can press the front windshield defogging button on the air conditioner panel, and the MAX air conditioner blower will work with the maximum air volume to play a rapid defogging effect. If you need to heat the rear windshield to remove ice from the glass, you need to press the rear window heating button on the air conditioning panel to turn on the rear window heating button and the indicator light is on.

The rear window heater started working. Because the air conditioning system is divided into two zones of air conditioning, you can choose the temperature required in the car separately, and turn on the Auto gear after selection, and the air conditioning system will automatically adjust the air volume, wind direction of each air outlet, cooling or heating according to the indoor temperature just selected. It will also be adjusted according to the comparison of indoor and outdoor temperatures.

In addition, it automatically switches between internal and external circulation according to the degree of pollution of the outside air. In this way, the operation is relatively simple, completely handed over to the automatic air conditioner to deal with the line, the main driver and co-pilot, only need to rotate the left and right sides of the air conditioning panel according to the required temperature, the air conditioning temperature rotation button can be. However, the functions of front windshield defrosting, rear windshield heating, and seat heating can only be turned on and off according to the use and needs of the vehicle.

Among them, the internal and external circulation buttons need to pay attention to the status of their indicator lights when they are used, and the indicator lights up accordingly.

When the Civic turns on the heater in winter, you can directly turn on the air conditioning fan, and then turn off the air conditioning AC button to adjust the temperature to about 30 degrees, so that the warm air will come out, and then adjust it according to the actual temperature in the car.

Civic car air conditioner mainly uses two functions: cooling and heating, find the air conditioner switch and turn it on (on off), and the air conditioner starts to work. Then the air conditioner temperature can be set by the air conditioner temperature knob. It can be set to cooling or heating mode.

First click the Civic's one-button start button to start the engine, otherwise you can't use the car air conditioner;

2.After that, the vehicle's air conditioning control system can be found in the central control position of the vehicle;

3.After that, click the turn on button on the air conditioning control system to power on the air conditioner and turn on the air conditioner;

4.Then turn the air conditioner temperature adjustment knob clockwise to turn on the Civic's heater.

1. First click on the Civic steering wheel.

Start button below to start the vehicle's engine.

2. Later, the air conditioning control unit can be found in the illustrated position of the cockpit of the Civic vehicle.

3. First, click the climate button to enter the air conditioner settings.

4. After that, click the OFF button to close the compression mechanism of the vehicle, so that the air conditioner will be turned off. Dotted keys.

5. After that, turn the temperature adjustment knob with the homeopathic needle, so that only the heater will be turned on and the air conditioner will not be turned on.

If you want to turn on the heater, you only need to rotate the control knob of the air conditioner temperature to the red area. In the state of turning on the warm air, you need to turn off the AC button, after turning on the AC button, the compressor of the air conditioner will be turned on, this is the refrigeration switch of the air conditioner, you need to turn on the compressor switch when using the air conditioner in summer, and you do not need to turn on the AC button in the state of turning on the warm air.

The 10th generation Civic is equipped with an automatic climate control air conditioner, and if you want to turn on the heater, you only need to rotate the air conditioning temperature control knob to the red zone.

In the state of turning on the heater, the ant chain needs to turn off the AC button, after turning on the AC button, the compressor of the air conditioner will be turned on, which is the refrigeration switch of the air conditioner, and the compressor switch needs to be turned on when the air conditioner is used in summer, and the AC button is not required to be turned on in the state of turning on the heater.

It should be noted that the temperature is relatively low in winter, and the engine needs to be preheated before using the warm air, because the engine is in the state of cold start, the temperature of the engine is very low, and the use of warm air in this state will not only lead to an increase in the load of the engine, but also lead to an increase in the fuel consumption of the car.

Turning on the heater without any preheating will make the engine less efficient, and the damage to the engine itself will be very large.

After driving for a period of time, the water temperature of the engine will rise before turning on the heater, and then the external circulation of the car needs to be opened, and after a period of time, the internal circulation will be opened, so that the temperature in the car can be raised in the shortest time, and at the same time, it can also save fuel.

Ten generations of Civic heater opening method:

1. Press the "auto" button to turn on the automatic adjustment of the rolling core resistance of the 10th generation Civic air conditioner.

2. Press the "A C" button to turn on the heating mode of the air conditioner. "A c" is the button to switch between the warm air and the air conditioner, click once to turn on the warm air mode, and click twice to turn on the air conditioning mode.

3. Click the red arrow button on the diagram to increase the temperature, and Dachun will read the temperature adjustment to 25 degrees.

4. Press the "mode" button shown in the figure to adjust the air outlet mode as needed, and the heater of the 10th generation Civic can be turned on normally.

The 10th generation Civic is equipped with an automatic climate control air conditioner, and if you need to turn on the hot air, you can turn on the air conditioning system and turn on the temperature control knob to increase the temperature setting.

The circulation system of the air conditioner is a circulation system composed of main components such as compressor, condenser, expansion valve, and evaporation tank. The refrigerant circulates in the circulation system, and the heat in the car room is taken away by the principle of heat transfer in the evaporation chamber to achieve the effect of reducing the temperature.

The heating system and the air conditioning system are two different working principles, the heating air is the temperature of the coolant of the engine cooling system, and the heat of the small water tank of the heating air is transferred to the room through the blower, and it is also due to the principle of heat transfer to warm the cab, when the heating is turned on, the air conditioning does not need to be turned on, that is to say, the air conditioning compressor should be turned off, therefore, the heating air will not affect the engine power and gasoline consumption.