Lenovo Legion notebook keeps blue screen when booted up, and it can t be started, what should I do?

1. Press F8 to press F8 to get the advanced option to appear in the release of the power, and select "The latest correct configuration" Enter to repair.

2. Press F8 to enter the safe mode after booting up, and then exit, select Restart or Shut Down to boot on, and you can enter the normal mode (repair the registry).

3. If the fault persists, please use the system restore that comes with the system to restore it to the time when you did not have this failure (or use the restoration software to restore the system).

4. There are bugs in the application: some errors or unstable factors in the use of the program will also cause blue screens;

5. Attacked by unknown programs or viruses: check carefully and take precautions;

6. Version conflict: Some applications need to call a specific version of the dynamic link library DLL, if the old version of the DLL overwrites the new version of the DLL when installing the software, or when the application is deleted, the useful DLL file is deleted by mistake, it may make the above call fail, resulting in a "blue screen". You can reinstall it and give it a try.

7. There are errors or corruption in the registry: In many cases, this is the main reason for the "blue screen". The registry holds important data such as the system's hardware configuration, application settings, and user profiles, and if the registry is wrong or corrupted, it is likely to have a "blue screen".

If the computer often has a "blue screen", you should first consider that there is a problem with the registry, and you should detect and fix it in time to avoid greater losses;

8. Incompatibility of software and hardware: The development of new technologies and new hardware is very fast, and if new hardware is installed, there is often a "blue screen", which is mostly related to the fact that the BIOS or drivers of the motherboard are too old, so that the hardware cannot be well supported. If your motherboard supports BIOS upgrades, you should upgrade to the latest version or install the latest device drivers as soon as possible.

9. Caused by viruses, it is recommended that you can use Tencent PC Manager antivirus software, a comprehensive anti-virus check, a thorough cleanup, Tencent PC Manager, Toolbox - Hardware Detection - Check the configuration, update the driver according to the configuration!! Computer Clinic - Search System Blue Screen - See how to fix it.

Solution. Due to the blue screen error caused by "new software or driver installed", it is recommended that you enter safe mode.

Uninstall recently installed software in safe mode, or uninstall the driver in safe mode to try to fix it.

1. How do I uninstall the software in safe mode?

Uninstalling the software in safe mode is not the same as in normal operation, you can:

and enter; Under Programs, select Uninstaller;

On the left, select View installed updates, select Installed time, and sort updates by installation date to see the latest updates.

Right Slow Plex key to uninstall the update, select [Yes];

Select Restart now to ensure that the update is completely uninstalled.

2. How do I uninstall the driver in safe mode?

If you have recently installed or updated a driver, you can try to roll back, disable, or uninstall the driver "as administrator" to check if the blue screen error goes away

Step 1: Open [Device Manager], you need to roll back, disable, or uninstall the driver.

and right-click and select Properties;

Step 2: Select the Driver tab, then select Rewind Driver, Disable Device or Uninstall, and click Yes.

Reminder, these three operations cannot be performed at the same time, you need to try them in order to confirm the blue screen reason. If it doesn't work, we recommend that you back up your important data, and then restore or reinstall the system.

2. Blue screen solution caused by "external hardware or hardware upgrade".

If the blue screen error is caused by "connecting to other hardware devices or performing hardware upgrades and changes", we recommend that you do the following:

1. Check whether the external or installed hardware is plugged in, this problem that is ignored by many people often causes many inexplicable failures, and blue screen problems often occur for newly installed computers.

2. If the blue screen appears after the hardware is changed, you need to consider compatibility issues or hardware failures, it is recommended that you turn off the power and unplug the external or installed hardware devices, and then turn on the computer to see if it is normal.

3. Clicking on unknown links may poison the computer.

4. The system automatically updates or fixes bugs that disturb Sakura.

5. Blue screen prompt and ** error.

The blue screen is usually caused by the failure of the system to boot normally due to the installed driver, the conflict between the software and the current system, or the hardware problem.

Don't consider the hardware problem first,Boot with the original system disk,Reinstall the system,If it can be restored to normal use,That's caused by the reasons mentioned above。

If you still can't use it normally after reinstalling the original system disk, you can try to replace the hardware (such as replacing memory, hard disk, etc.) to find out the problematic hardware and repair or replace it.

The causes of blue screen tend to focus on incompatible hardware and drivers, problematic software, viruses, etc. Workaround:

1. The cause of the virus. Use PC Manager to disinfect the virus.

2. Reasons for memory. Use an eraser to wipe the gold finger of the memory module and wipe off the oxide layer to ensure that the memory module is installed and running normally.

3. The chassis is not clean. The CPU fan is too dusty and the socks cannot operate normally, causing the CPU temperature to be too high, so use a brush or hair dryer to clean up the dust on the inner wall of the case, the CPU fan, the graphics card fan, and the motherboard.

If you often have a blue screen in Xunlu, then it's the reason for the system, just clean up the cache garbage, and then restore the system, if it's still a blue screen, then you can only re-do the system.

If the blue screen is often buried, it may be a problem with the computer system, it is recommended to reinstall the system, but if it is still not possible to reinstall the burning system, then the only way to send the computer to the after-sales service for repair. In general, the system asks the remaining questions.

Often the blue screen may be due to the system software, it is recommended to reinstall the system, if it still will, it may be a hardware problem, you can go to the after-sales point for repair.

Lenovo Legion often reinstalls another system as soon as it enters the blue screen.

Summary. Hello, I'm glad to answer your questions for your query about the problem that Lenovo Legion appears blue screen reboot automatically fixes, which may be caused by a variety of reasons, here are some possible reasons and solutions:1

System file corruption. If your computer's system files are corrupted, it may lead to the issue of blue screen restart being fixed automatically. At this point, you can try to use the system restore function to restore the system state at a previous point in time, or reinstall the system.

2.Memory failure. Memory failures can also lead to issues that the blue screen restart fixes automatically.

You can try to use hardware detection software to check whether the memory is working properly and carry out relevant repairs or replacements. 3.Driver issues.

If there's a problem with your computer's drivers, it can also cause the Blue Screen Restart to fix it automatically. You can try to update or reinstall the driver, or use the driver uninstaller to completely remove the old driver and reinstall the new version of the driver. 4.

Hardware failure. Some hardware failures, such as issues with power supply, hard drive, etc., can also lead to issues that the blue screen reboot fixes automatically. At this time, the corresponding hardware inspection and repair are required.

Hello, I'm glad to answer your questions and find out that Lenovo Legion has a blue screen reboot automatically fixed problem, which may be caused by a variety of empty rock thoughts, and here are some possible reasons and solutions:1System file corruption.

If your computer's system files are corrupted, it may lead to the issue of blue screen restart being fixed automatically. At this time, you can try to use the system restore function to restore the system state at a previous point in time, or reinstall the system. 2.

Memory failure. Memory failures can also lead to issues that the blue screen restart fixes automatically. You can try to use hardware detection software to check whether the memory is working properly and carry out relevant repairs or replacements.

3.Driver issues. If there's a problem with your computer's drivers, it can also cause the Blue Screen Restart to fix it automatically.

You can try to update or reinstall the driver, or use the driver uninstaller to completely remove the old driver and reinstall the new version of the driver. 4.Hardware failure.

Some hardware failures, such as issues with power supply, hard drive, etc., can also lead to issues that the blue screen reboot fixes automatically. At this time, it is necessary to carry out corresponding hardware inspection, trap testing and maintenance.

In short, in view of the problem of automatic repair of Lenovo Legion computer blue screen restart, it is necessary to analyze the specific situation and find the root cause of the problem to fix it accordingly. It is recommended to back up important data before repairing it to avoid loss. If you are not good at repairing or dealing with problems, it is recommended to contact a professional computer repairer or the manufacturer's customer service for help.