Wentai lettering tutorial, Wentai engraving how to flip the text

<> Wentai engraving and flipping text steps:

1. Select the seal that needs to be flipped;

2. Click "Advanced Functions" in the menu bar;

3. Click "Mirror";

4. Select "Vertical Mirror";

5. Click "OK";

6. Click on the middle node on the left or right side of the stamp selection box.

Wentai engraving: is a kind of engraving software, support in win9x, win2000, winme, windows xp to run, multi-Chinese language support, the product has won two awards: Beijing New Technology Experimental Zone fist product award; National Excellent Software Award.

Question 1: How to use Wentai engraving software to make hollow characters, which are used for painting Let's take an example: such as "Wen".

First of all, select the word that needs to be modified, and then click the "tendon" in the toolbar to open the tendon word, select the first item "horizontal rectangle", and set the cutting width to 3mm (determine the width according to the actual situation, drag the mouse to draw a horizontal line in the position as shown in the figure, a blue rectangle appears, the last item in the selector is a red mouse pointer, this is used to adjust the position of the drawn blue rectangle, use it to select the blue rectangle (the rectangle will become red), and then use the arrow keys of the keyboard to adjust the rectangle to the appropriate position, Then click the penultimate item in the clicker to cut it off.

Then the third item in the selector, "oblique rectangle", roughly draws the cut-off position, still uses the red mouse pointer to select the oblique rectangle to adjust the position, and finally cuts off. Some of these places are not ideal, and you can use the "node" tool to modify it.

Question 2: How should Wentai Minghao carve hollow words?Spray paint is a fine word, you put the parts that are not connected with the knot to connect them together, pay attention (the connection depends on the size of the text, the big one you connect out of the sea, the small connection should be about 5 mm).

Question 3: How to make hollow characters with Wentai? In the Wentai file, the size of a certain part of the word is rewritten with a node, and the gap between the words is smaller than the size of the blade, and the carving is connected together.

Question 4: How does Wentai carve hollow characters??? Simple, it's good to adjust the depth of the knife, for example, the material you want to engrave is 10mm, the depth of the knife can be carved through, question five: how to engrave hollow words with the cutting plotter output plt file and then import it into the special engraving software, question six: how to make a hollow font for Wentai carving tombstone Tombstone has not been carved I have seen that font engraving is not a hollow bar. Wentai's words should be a three-dimensional corner of the taper knife...

Question 7: After the Wentai hollow word is engraved, how to engrave a crystal word set in the clipping mask!

Question 8: How to use Wentai engraving software to design and engrave hollow characters? Ha ha. The landlord has a lot of humor!

After carving the words, directly tear off the words, and they will be hollowed out. If you want to leave a word, you can tear up the empty one.!

Question 9: How to set Wentai tendon settings, I carve a hollow font, you need to set the position of the tendons for each word or the computer automatically adds Wentai has a tendon character setting, on the right of the red mouth glyph of the hack, step 1, select a word; 2. Click on the button to set the word "connecting ribs"; 3. Set the line width of the connecting bar; 4. Use the horizontal and vertical oblique to confirm the word in the appropriate position of the text.

Question 10: How to hollow out with ps**Ah, I want to use it on Wentai engraving can be directly typeset, how to hollow out into hollow** directly used in Wentai ah 5 points Use the quick selection tool or pen tool to select the place you want to hollow out, and then erase it with an eraser or background eraser to achieve a hollow effect, pay attention to storage** to save it in png format.

Summary. Wentai Engraving is a company specializing in lettering services, providing high-quality lettering services, including engraving, hanging jewelry, tattoos and other forms. Wentai Engraving insists on satisfying customers with high-quality service, during this period, Wentai Engraving will strictly control every step of the production process to ensure that customer needs are met to the greatest extent.

You can find the official website of Wentai engraving through the search engine, and you can see a detailed introduction to the engraving service on the official website. In addition to the bridge pin, you can also go to the Wentai engraving store for the engraving of the dust and burial, the professional workers will provide you with engraving services, so that your items are full of personality and beauty.

Wentai Engraving is a company specializing in lettering services, providing high-quality lettering services, including engraving, ornamental jewelry, tattoos and other forms. During this period, Wentai Engraving will strictly control every step of the production process to ensure that customer needs are met to the greatest extent.

Summary. Hello, according to the relevant departments, first turn on the Yoshihiko computer cutting plotter and put the materials to be engraved. Press "Offline", press "Decelerate", "Accelerate", "Pressurize", "Depressurize" to adjust the position of the cutter respectively.

Press "Decelerate" or "Accelerate" to adjust the speed of "Lettering Speed" to 050mm s; Press "Pressurized" or "Depressurized" to adjust the pressure of "Knife Pressure" to 200g, and then press "Origin" to position. After adjusting the value of the engraving speed and the pressure of the carving knife, open the coreldraw x4 and press Ctrl+E to export the PLT format, press OK directly, open the Wentai engraving 2018 software, set the size, and press "Create New File".

Hello, according to the relevant departments, first turn on the Yoshihiko computer cutting plotter and put the materials to be engraved. Press "Offline", press "Decelerate", "Accelerate", "Pressurize", "Depressurize" and "Depressurize" to adjust the position of the cutter respectively. Press "Decelerate" or "Accelerate" to adjust the speed of "Lettering Speed" to 050mm s; Press "Pressurization" or "Decompression" to adjust the pressure of the "Knife Pressure" to 200g, and then press the "Origin" positioning.

After adjusting the value of the engraving speed and the pressure of the carving knife, open the coreldraw x4 and press Ctrl+E to export the PLT format, press OK directly, open the Wentai engraving 2018 software, set the size, and press "Create New File".

Click "File", select "Read", and select the PLT format just exported in the vertical type, as shown in the figure. After pressing "Open" and clicking on the right side of the big "Select" black arrow, you can click on the content in PLT format that you just "read", and press the shortcut key "Alt+." insteadCenter vertically and center horizontally by pressing "Alt+,".

Click "File", select "Engraving Output" or press the shortcut key Ctrl+K, then the "Engraving Output" interface will appear, enter the relative size next to the material width and material length difference, and then press "Layout Preview", and then press "Engraving Trace Output" as shown in the virtual rubber diagram.

Hopefully, thank you, and remember to like it.

Wentai engraving software self-learning tutorial:

1. Set the page size. The layout needs to be as big as it gets. After entering the Wentai Fu Linmen Special Edition software, the software will automatically prompt the user to set the layout size. At this point, users can set the layout according to their needs.

2. It is called the graphic of touching and closing the line (called the graphic of Fulinmen).

3. Arrange neatly. It provides users with powerful features for orderly arrangement and precise positioning, allowing several objects to be neatly arranged in a specified orientation, or moved precisely to the center of the layout.

4. Accurate positioning. Shortcut key operation: Ctrl D.

5. Graphical application operation.

Carving, in sculpture, refers to cutting or carving wood, stone or other materials into the desired shape. The tools used for this purpose are knives, chisels, chisels, cones, axes, and hammers. In the most common method of carving, a chisel is held in one hand and a mallet in the other, and the chisel is hammered into the wood or stone with the mallet.

Although some metalworking techniques, such as welding and assembly, have become increasingly important over the past century, engraving and moulding are still the two main sculptural techniques. A finished sculpture can be referred to as an engraving, but the term sculpture is often used to refer to a work that has serious artistic or aesthetic connotations.

Tools required: Computer cutting plotter, Wentai engraving 2018 software.

The steps are as follows: 1. Turn on the computer cutting plotter and put the materials to be engraved. Press "Offline", press "Decelerate", "Accelerate", "Pressurize", "Depressurize" to adjust the position of the cutter respectively. Press "Decelerate" or "Accelerate" to adjust the speed of "Lettering Speed" to 050mm s; Press "Pressurized" or "Depressurized" to adjust the pressure of "Knife Pressure" to 200g, and then press "Origin" to position.

As shown in the figure: 2. After adjusting the value of the lettering speed and the pressure of the carving knife, open the coreldraw x4 and press Ctrl+E to export the PLT format, and press OK directly, as shown in the figure

3. Open the Wentai Engraving 2018 software, set the size, and press "Create New File".

5. Click the black arrow "Select" on the right side to click on the content in PLT format that you just "read", and press the shortcut key "Alt+."Center vertically and center horizontally by pressing "Alt+,".

6. Click "File", select "Engraving Output" or press the shortcut key Ctrl+K, and then the "Engraving Output" interface appears, enter the relative dimensions in the width and length of the material respectively, and then press "Layout Preview", and then press "Engraving Output".

7. Finally, an interface appears, don't worry about the rest, press "start" directly, and then the machine will start to engrave.

1. Select the part to be carved first, click "2D" - set the engraving method - > save the engraving path.

2. Open the engraving control software to engrave.

You can directly find a 2002 version of Wentai engraving, this is easier to find. Pickup cutting plotter service point profile +

First of all, let's talk about what exactly is engraved There are 2D, 3D, and cutting in it. You can only be specific to help you.

Tools required: Computer cutting plotter, Wentai engraving 2018 software.

The steps are as follows: 1. Turn on the computer cutting plotter and put the materials to be engraved. Press "Offline", press "Deceleration", "Acceleration", "Stove Cave Pressurization", "Depressurization" to adjust the position of the cutter respectively.

Press "Decelerate" or "Accelerate" to adjust the speed of "Lettering Speed" to 050mm s; Press "Pressurized" or "Depressurized" to adjust the pressure of "Knife Pressure" to 200g, and then press "Origin" to position. As shown in the picture: Orange Ridge.

3. Open the Wentai Engraving 2018 software, set the size, and press "Create a new file".

5. Click the black arrow "Select" on the right side to click on the content in PLT format that you just "read", and press the shortcut key "Alt+."Center vertically and center horizontally by pressing "Alt+,".

6. Click "File", select "Engraving Output" or press the shortcut key Ctrl+K, and then the "Engraving Output" interface appears, enter the relative dimensions in the width and length of the material respectively, and then press "Layout Preview", and then press "Engraving Output".

7. Finally, an interface appears, don't worry about the rest, press "start" directly, and then the machine will start to engrave.