What s going on with the black screen that the Apple phone often freezes

1.Press and hold the power button and the home button at the same time, the home button is the only button on the screen, press until it is turned on.

2.This recovery method is the most commonly used method to recover iPhone firmware in general unlocking tutorials.

1) Turn off your iPhone;

2) Press and hold the power button and the home button at the same time;

3) When you see the white Apple logo, release the power on and off button and keep holding the home button until you enter recovery mode.

4) Turn on iTunes and wait for it to prompt you to resume mode, then press and hold the shift key on your keyboard, click "Recover", and select the corresponding firmware to recover.

1.The black screen of mobile phones can usually be divided into two types: one is the black screen in use, and the other is the black screen in standby;

3.The reason for the black screen is often that the screen triggers the circuit to react lately.

What should I do with the black screen of my iPhone?

First, the iPhone itself is a refurbished machine or other machine with quality problems, and occasionally there will be an unstable black screen, but it is not a damaged screen.

The second, which entered Apple's DFU mode by chance, is Apple's recovery mode.

The third possibility is that the Apple system won't boot.

The fourth is that the hardware is damaged and the screen is broken.

It needs to be sent to the Apple after-sales center for repair

Troubleshooting:

1. When the iPhone suddenly goes black, freezes, can't turn on, and there is no response, you can try to press and hold the power and home buttons on the home screen at the same time and keep them for more than 10 seconds. If you can see it, you can't force it to restart.

2. If the forced restart is successful, you can see an Apple logo on the screen. After the reboot is successful, it can be used normally.

3. Of course, sometimes it may be because of the lack of power, resulting in automatic shutdown, no matter how you operate, you can't turn on the phone, when you encounter this situation, please connect the iphone to the power charger first.

4. If it is automatically shut down because of the lack of power, a battery icon will appear on the screen at this time.

5. In addition, the battery of the iPhone must be charged to more than 5% before it can be turned on normally, if the power is very low, please let it charge before turning it on.

There are several possibilities for this to happen on your phone:

1. Check whether the charger is plugged in well with the power socket, and you can unplug it and plug it back in.

2. Check whether the mobile phone charging data cable is well connected to the mobile phone charger interface.

3. Use the original charger data cable for charging.

4. Replace the battery with a new one.

5. If none of the above methods work, it is recommended to send the mobile phone to the mobile phone store for repair.

What happens when the iPhone suddenly has a black screen of death1, the black screen and crash of the mobile phone may be caused by a system failure or a conflict with the software. 2. It may also be caused by low battery power, if the battery is low, you can take out the battery first, reinstall it after a while, and then plug in the charger, regardless of whether it shows charging or not, don't pay attention to it, and wait for a long time to charge, it should be able to turn on. 3. If it is not a battery problem, you can be sure that it is a system problem, if the phone cannot be turned on, you can press and hold the power button + volume down button in the shutdown state to enter the recovery mode, select wipe date factory reset to clear the data and restore the factory settings.

The reasons for the black screen of death of Apple phones are: physical damage, insufficient memory, insufficient battery, and hardware problems.

1. Physical damage.

The iPhone may suffer from physical damage, such as bending or water ingress.

2. Insufficient memory.

It may be that when the memory of the Apple phone is not enough, it suddenly causes a black screen or freezes.

3. Insufficient power.

It may be that the iPhone has a low battery and it won't turn on.

4. Hardware problems.

It may be that there is a problem with the Apple phone's boot button, pretending button, or other hardware.

Solution: iPhone Black Screen of Death:

1. If the power is insufficient, you can use the original data cable and charger to charge the Apple mobile phone and check whether the mobile phone responds.

2. If you confirm that the Apple phone has power, you can press and hold the power button and the home button of the mobile phone at the same time, press and hold for about 10 seconds to release, and the mobile phone will automatically restart if it is not faulty.

3. If the above methods don't work, you can charge the iPhone for a while before trying to restart.

4. If the mobile phone does not respond to direct charging, it is recommended to send it to the Apple repair department to check whether there is a problem with the accessories.

5. After the above operations, there is still no response or can not be turned on normally, it is recommended to send it to the local Apple official for after-sales maintenance.

Pros of iPhone:

1. The biggest advantage of Apple's mobile phone is that it has a powerful iOS system. Apple's mobile phone's iOS system is known for its high fluency, good security and stability, although the current Android system is also constantly improving, but for iOS, it still loses a lot.

2. The touch screen of the Apple mobile phone is very sensitive, and the appearance is very good-looking.

3. The entertainment function of the Apple mobile phone is particularly powerful, with multi-touch and gravity sensing auxiliary functions.

4. The mute button of the Apple mobile phone is very convenient, and with a slight wave, there is no need to pull down the status bar to adjust.

5. Apple mobile phone has a strong wifi support function, and the Internet speed is very fast. <>

If your iPhone 13 has not encountered this situation, then it is lucky, because more and more users have been reporting this problem recently, and some netizens have reported that the detection is "no hardware problem".

iPhone13 due to iOS system reasons, there are problems such as stuck, stuck and unable to shut down, severely stuck and black screen, etc., you can try these 4 solutions.

Method 1: Restart your iPhone

If the iPhone is just stuck and stuck, it will return to normal after no longer performing screen operations.

After returning to normal, it is recommended to restart the device in time, which can generally solve some sudden iOS system problems.

If the iphone13 has been stuck, stuck with a black screen, and cannot be shut down and restarted, you can refer to the following solutions!

Method 2: Force restart.

If the iPhone 13 is stuck or stuck and cannot be shut down, you can try to force restart, and you can refer to this method for general basic iOS system failures.

Force restart operation for iPhone 13 series models:

Quickly press the volume up and down buttons, and then continue to press and hold the power button until the Apple logo appears after the iPhone screen goes black, release the power button, and wait until the iPhone boots up.

If the iPhone 13 will have problems such as stuck and black screen again in the later stage of use, it is recommended to refer to it.

Method 3: iOS System Repair.

When iPhone13 causes problems such as App flashback, device stuck, inexplicable restart, black screen, white screen, white apple, etc., due to iOS system problems, you can try to repair the iOS system.

Here is the use of Tenorshare Apple mobile phone repair tool, easy to fix 150+ iOS system questions, including white apples, black screen, non-stop restarting, stuck in recovery mode, update failure, unable to boot, etc.

How-To Guide: Step 1: iPhone Repair Tool. Connect your iPhone 13 to the computer via a data cable and click "Fix iOS System Problems".

Step 2: Since there will be no data loss in the "Standard Repair" mode, you can choose the "Standard Repair" mode preferentially.

If the software can't recognize your iPhone 13 normally, follow the prompts to put your iPhone 13 into recovery mode or DFU mode.