Can t charge the battery, the charging keeps flashing, the charging can t be charged, and the shutdo

The landlord can replace a charger.

Generally speaking, the charging icon is always displayed when charging, but it is not charged. It could be a problem with the charger and cable. For example, the data cable is not in good contact or the charger is damaged.

In the case of not being charged, a flashing is due to some state of his or an abnormal system conflict, resulting in a phenomenon that you later turn off again and restart again.

If you can't charge it, and then the electricity keeps flashing to show that it can't be charged, this kind of charger should be more problematic with your charger, you can change a charger to try, if it is useless to change the charger, you can just move the position of your plug.

This needs to look at the quality of the charger and the interface of the charger is matched by the original factory, and then according to the interface of the mobile phone interface and the charger to see if there is anything dirty in the middle, such as dust and the like, if there is, it needs to be cleaned up, so that after that, see if it is charged normally.

What is it? Is it that the phone can't be charged and the power goes out? What brand of phone do you have, and how do you know it's showing up on charging?。。

You're not saying he's in a shutdown state, it's a shutdown state, how do you look at it is to see that it's charging, it's becoming.

Don't you have a mobile phone repair shop near your home? Why not go to a repair shop?

Hi! Hi The charging current of each mobile phone has a maximum value, which cannot exceed too much, such as the original configuration is 500ma, you use 800mA to flush directly, and the result is that the mobile phone will heat up while charging, which is actually the charging element on the circuit board of the mobile phone is heated.

The phone battery cannot be charged, and it is possible that the battery has entered a dormant state. This is mostly caused by the user running out of power and the phone automatically shuts down. The solution to this situation is to remove the battery, wait 5 minutes, and then reinstall the battery.

Use a data cable to connect your Mi phone to the computer, and after 30 minutes, turn it back on.

2.In the case of sudden mobile phone battery not charging, you also need to check whether you are using a regular original charger. If you are using a different charger, you need to check if there is a problem with the charger or if the charger port is damaged.

Switching to a new charger can solve this situation.

The charging can't be rushed, and the charging is displayed all the time, and then the phone is turned off. That means your charger is broken, so it only shows charging but can't charge it. Just change the charger.

The phone does not charge and is in the shutdown state, and the screen display keeps flashing and the reasons and solutions.

The description of this problem is vague and unambiguous. In general, this situation can be due to one of the following reasons:

Damaged charger or charging cable: This may cause the device to not be charged.

Aging battery: If the device is used for a long time, the battery may deteriorate and the capacitance will decrease, resulting in a failure to fully charge.

Device hardware failure: For example, the internal interface of the device is malfunctioning, which may also be the cause of the failure to charge properly.

If the device still cannot be charged normally, it is recommended that you first replace the charger or charging cable to try, or go to a professional after-sales service center for testing and repair.

Regarding the above problems, first check whether the original charger, the original charging data cable, the mobile phone charging tail plug, and the mobile phone battery are normal.

If the above thorough checks are normal, then the problem with the phone may be on the motherboardThe charging control circuit has an abnormal or damaged fault.

1. The charger or data cable is broken.

Change a cable or change the charging plug, and then charge it to see if it can be charged in, if it is flushed into the power, then it proves that it is a problem with this, change the cable, or change the charging plug. Pay attention to the current and voltage of the original charging plug of your mobile phone when changing the charging plug, so as to prevent it from causing damage to the mobile phone.

Second, the problem of mobile phone interface.

Remove the battery (if you can't dismantle it, don't force it to be dismantled), use universal charging to flush, if it can be charged, it is a problem with the mobile phone charging interface, and it is determined that it is caused by the poor charging interface of the mobile phone, such as loosening. Please go to a professional mobile phone store for repair, do not disassemble the phone by yourself.

3. Battery problems.

Change the battery to see if it can rush in, if you can charge it after changing the battery, it is likely that the battery is scrapped. If it is determined that it is a battery problem, then change the battery, I do not recommend buying the battery at will, it is best to be an original or high-quality battery.

It can't be charged, the charger keeps flashing, and it shows that it is charging, which means that the battery voltage may be too low and there is no power, and it needs to be activated before it can be charged.