-
Hello! ASUS motherboard boot item, boot and press F8 continuously to select the boot item. If it doesn't help you, you can continue to ask, or you can exchange feedback and ask for help from the engineer.
-
Method 1: BIOS settings are booted up.
Press and hold the F2 button to enter the BIOS.
Move left and right to find the "boot" menu.
Find "boot option" in "boot" and "boot option 1" in "boot" and press enter. We find the USB stick.
After selection, press F10 to save and exit. Restart the computer and you can start it with a USB flash drive according to the choice.
If the system is pre-installed with Win8, then if you want to install Win7 system, you need to have relevant settings in BIOS.
Method. 2. Press the ESC key to select when the power is turned on.
Turn on and hold the ESC key on your keyboard.
The launch selection will pop up.
Select the USB flash drive to boot, and then press the enter key, you can directly enter the USB flash drive to boot.
If the system is pre-installed with Win8, then if you want to install Win7 system, you need to have relevant settings in BIOS.
-
How to set up USB flash drive boot for ASUS Turn.
-
The hotkey for the boot USB flash drive of the ASUS brand motherboard BIOS is: F8. After popping up the menu, select the USB flash drive, and then click the enter key, so that you can enter the USB flash drive to start
-
1. Press the power button and wait for the computer screen to appear on the boot screen, then press the F2 button to enter the BIOS setting interface.
2. In the BIOS setup interface that opens, move the cursor to switch the interface to the "Boot" bar, and then move the cursor through the up and down arrow keys and select "Hard Drive Order" to confirm. This is shown in the figure below.
3. In the pop-up Hard Drive Order window, move the cursor to select the U disk to boot as the first boot item, and press the F10 key to save and restart the computer after completing the settings. This is shown in the figure below.
-
The current USB flash drive can be used after automatic card reading and installation after access.
-
It's all weak! Plug in the U disk and press F8 to select when you boot up! Give it points.
-
1.Press F12 continuously when powered on.
2.Press F2 continuously when powered on.
For more information on how to install the system, please see my blog.
-
Press the F2 key to power on to enter the quick boot menu.
Use the up and down keys to navigate to the hard disk (SATA) and press Enter.
Press the F10 key again to save the settings and exit the settings to restart.
References: BIOS Settings[1] Startup Items.
References: Computer BIOS Boot Items.
-
Win7 32-bit system does not support UEFI startup, please use 64-bit version.
-
1.Computer CPU Pentium 4 or above, memory: between 1GB-3GB, it is recommended to choose Windows 7-32bit.
2.The computer configuration meets the requirements of more than dual-core CPU (only Dansen should meet the requirements of dual-core) and at least 4GB or more than 4GB of curved memory, it is strongly recommended that the landlord choose Win7-64bit flagship version of the system!
According to your computer configuration, you can install win7 operating system. Use the computer hard disk to install the system, you can install the win7 system, the specific operation is as follows:1.First of all, go to the ghost system base.
3.Open the unzipped folder, double-click "autorun", and in the window that opens, click "Install".Can.
4.In the window that appears, the ghost image file path will be automatically added, select the partition that needs to be restored to, the default is the C drive, and click the "OK" button to install it automatically.
-
Press the DEL button to enter the BIOS settings interface and select Advanced BIOS Features
In the Advanced BIOS Features interface, first select Hard Disk Boot Priority
Hard Disk Boot Priority Selection: Use the plus and minus signs "+" on the keypad to select the mobile device, and select the USB flash drive on top. Then, press the ESC key to exit the sedan car.