How to convert earpiece mode to speaker mode on OPPO phone

1. Take OPPO mobile phone R17 as an example, light up the desktop of the mobile phone, find the red box and select "Dial", and click to enter.

2. Take "China Telecom" as an example, click the red box and select "China Telecom".

3. Click to enter the dialing ** interface.

4. At this time, it is the earpiece mode, find the red box in the lower right corner and select the "speaker".

5. Find the red box selected, click the "Speaker" icon, and it will be the speaker mode.

6. If you need to switch back to the handset mode, click the red box in the lower right corner to select "Speaker".

How to convert earpiece mode to speaker mode on OPPO phone:

QQ switching method: in the QQ chat interface - click on the voice message - pop-up menu - and then click on the handset hands-free.

QQ switching method: in the QQ chat interface - click on the voice message - pop-up menu - and then click on the handset hands-free.

The mobile phone has been displaying the earpiece mode, this situation may be caused by the following reasons: 1. The shrapnel in the headphone jack is not completely reset, you can try to insert the earphones and turn them, and then plug and unplug them a few more times to try it, 2. The system software is abnormal, in this case, you can shut down and restart, or refresh the firmware and repair it, 3. If there is a problem with the headphone socket hardware, please take the time to send the machine to the OPPO after-sales service center for testing and processing.

Note: This time applies to all OPPO series models.

If your phone is "whispering" or "silent", you may want to try these methods!

1. To see if the speaker is blocked or blocked (such as the influence of the protective case or film), you can use a small soft-bristled brush to clean it.

2. Restart the phone to see if it recovers.

3. You can pull down the status bar of your phone and set your phone to ring.

5. If there will be no sound on one side or low sound after adjusting the audio equalization, you can go to Settings > Other Settings > Barrier-free > Audio Equalization, pull the audio adjustment point back to the middle, and return to the default position, then it can return to normal.

ColorOS 12 system phone setup path: System Settings > Accessibility > Audible > Left and Right Channel Volume Balance, pull the audio adjustment point back to the middle.

If it is a hardware problem or the above methods cannot solve your problem, it is recommended that you back up your important data in advance, bring your mobile phone and purchase voucher to the OPPO customer service center for testing, and professional engineers will solve it for you.

Change your phone's settings.

It may be that when I was fiddling with my phone, I accidentally changed the settings of my phone and changed the external mode to the earpiece mode. Go to your phone's settings and change the external mode again. Different phone settings will be different, according to the specific situation of your phone.

The microswitch of the headset fails.

The phone is wet. Usually, when you are not careful, the mobile phone is exposed to moisture or water, which causes the mobile phone to be wet and cause poor contact. Use a hair dryer to blow on the headphone jack of your phone, and you're good to go.

Check to see if the headphone jack metal piece is misaligned.

Check whether the metal piece of the headphone jack is misaligned, or there is oxidation, which causes poor contact. Dial it back with a small object, and if there is oxidation, wipe it with something.

Mobile Antivirus. If there is a virus on the mobile phone, it will also cause the mobile phone to have no sound, so disinfect the mobile phone to see if it has any effect.

By shutting down and turning on the phone, or restoring the factory settings, see if it can be restored to normal.

Professional overhaul. If the above methods do not work, it may be that there is a problem with the earpiece, and it is recommended to go to a professional place to repair the mobile phone for maintenance and replacement of parts.

Answer: The method of changing the mode of the OPPO handset is: 1. Open the "Settings" interface of the mobile phone and find the "Smart and Convenient" option; 2. Click "Gesture Somatosensory" to enter the "Smart Pick-up**" interface; 3. Find the "Hands-free switching during call" function, and turn on the right button to complete the handset mode change. After turning on this function, when you pick up the phone close to your ear while on a call, the hands-free mode will automatically change to the handset mode for the user's convenience.

Question: My phone used to have a good voice chat sound, what software may have been deleted since that day to clean up the garbage? I send a chat with someone and I can't hear the sound and it pops up to use the handset mode, but the other party can hear the other party talking, how to deal with this situation.

If the handset of your phone is quiet, please handle it as follows:

1. Please check whether the film, holster, etc. of the mobile phone cover the earpiece, if so, please remove it and try again;

2. Please check whether the handset of the mobile phone is dusty or blocked by foreign objects, and you can use a dry soft-bristled brush to clean it;

3. During the call, use the volume up button to turn up the sound and confirm the sound level;

4. Whether the replacement time, place, and contact exclusion are caused by network problems;

If none of the above methods can solve your problem, please back up your mobile phone information (mobile phone number, SMS, **, etc.) and bring the purchase invoice, warranty card and mobile phone to the nearest OPPO customer service center for testing and processing.

This is available for all OPPO models.

Hello dear, in OPPO phones, the ability to output audio from both the earpiece and the speaker is called "stereo speaker". This information can allow users to get a more immersive experience when listening, watching, or playing games. However, this feature is only available on some specific OPPO phone models.

When the stereo speaker function is turned on, the OPPO phone will send the audio signal to the earpiece and the speaker at the same time. This feature can be turned on or off in the system settings. The specific steps are as follows:

1.Open the system settings, select the "Sound & Vibration" option. 2.

In the "Sound & Vibration" option, find the "Stereo Speakers" option. 3.Turn the "Stereo Speakers" option on or off to choose whether or not to use this feature based on your personal preference.

It should be noted that turning on the stereo speaker open and open function will increase the phone's power consumption, as using the handset and speakers at the same time will consume more power. Therefore, when using this function, it is recommended to connect the phone to a power source or use a power bank to ensure that the battery is sufficient.

Summary. 1. Take OPPO mobile phone R17 as an example, light up the desktop of the mobile phone, find the red box and select "Dial", and click to enter.

2. Take "China Telecom" as an example, click the red box and select "China Telecom".

3. Click to enter the dialing ** interface.

4. At this time, it is the earpiece mode, find the red box in the lower right corner and select the "speaker".

5. Find the red box selected, click the "Speaker" icon, and it will be the speaker mode.

6. If you need to switch back to the handset mode, click the red box in the lower right corner to select "Speaker".

How to switch the speaker to ** on an oppo phone.

Dear, hello, please wait a moment, we have seen your question in Bishan, and we are sorting out the information for you quickly, and we will send your answer to the little master immediately. Thank you for your support, recognize my service, and remember to give a thumbs up<>

<>1. Take the OPPO mobile phone R17 as an example, light up the desktop of the mobile phone, find the circle in the red box and select "dial", and click to enter. 2. Take "China Telecom" as an example, click the red box and select "China Telecom". 3. Click to enter the dialing ** interface.

4. At this time, it is the earpiece mode, find the red box in the lower right corner and select the "speaker". 5. Find the red box selected, click the "Speaker" icon, and then the speaker mode will be fast. 6. If you need to switch back to the handset mode, click the red box in the lower right corner to select "Speaker".

Summary. There is a volume adjustment button at the bottom left of the ** interface, click to enter the volume adjustment interface. In the volume adjustment interface, find the "Sound Effect" button in the upper right corner and click it to enter the sound effect setting interface.

In the sound settings interface, find the "Channels" option and select "Stereo". When you tap on the "Stereo" option, you can see that there is a "Channel Balance" slider below the option, with the left and right channel balance indicated in the middle of the slider. Move the slider to the middle position to enable the handset and speaker to sound at the same time.

Hello oppo re no 9, is the phone model OPPO re no 9 right?

How to set up the earpiece and speaker to sound at the same time.

It is the sound of the top and the bottom at the same time.

Go to the "Sound Settings" page4Find the "Smart Line Remote" switch and turn on Silent 5Turn on the "Handset Volume" switch and adjust the volume to the appropriate level6

Turn on the "Speaker Volume" switch and adjust the volume to the appropriate level7Return to the ** page, click the ** button to use the earpiece and the speaker at the same time**Qiaoxiao**.

Is it software? There is no <> in **ah

There is a volume adjustment button at the bottom left of the ** interface, click to enter the volume adjustment interface. In the volume adjustment interface, find the "Sound Effect" button in the upper right corner, and click to enter the Sound Effect Settings Mega Search Ming interface. In the sound settings interface, find the "Channels" option and select "Stereo".

When you tap on the "Stereo" option, you can see that there is a "Channel Balance" slider below the option, with the left and right channel balance indicated in the middle of the slider. Move the slider to the middle position to enable the handset and speaker to sound at the same time. After saving the settings, you can close the settings interface, and then you can enjoy the hail leakage effect brought by the earpiece and the speaker at the same time.