The phone is vivox7, and the battery can t be used for a day

The battery life of the mobile phone is shortened, and there is too much software running in the background of the mobile phone.

Let's talk about the solution:

If the battery of the mobile phone is aging, we need to buy a new battery, and then go to the repair center to replace the battery;

2.If there is too much background software, we can turn off the background software of the phone in the application management in the settings to avoid the high power consumption software from running secretly.

1. Turn off the power consumption service in time: If the wifi is not turned off, the power will be like running water, because in the environment where the wifi is turned on and there is no wifi, the mobile phone will keep searching for the wifi, which is particularly power-consuming. So, remember to turn off the wifi when not in use.

In the same way, do not turn on mobile network, Bluetooth, GPS and other services when not in use.

2. Close the unwanted background running program: If the software is not used in the background, it does not mean that it is not running and does not occupy memory, in fact, the software is always running in the background, which will inevitably consume power. You can slide up the shortcut bar and click "One-click Acceleration" to clean up the background memory of the phone.

3. Appropriately reduce sliding and unlocking: Appropriately reducing swiping and unlocking can reduce power consumption.

4. Enable the phone's built-in power-saving mode if necessary: After entering the power-saving mode, the mobile phone will intelligently adjust the CPU operation by turning off some functions to reduce the power consumption of the mobile phone to achieve the purpose of power-saving. Turn on Power Saving Mode:

Enter iButler - Power Saving Management - Turn on Normal Power Saving or Super Power Saving Mode.

It is definitely not normal for the battery to drain too quickly, it should be caused by the battery being used for too long or the battery aging. If there is a need to replace the battery, it is recommended to replace Pinsheng, vivo

X7 is more than 100 yuan.

Summary. Dear, hello, I'm glad to answer for you: vivox27 used 3 years of battery and ran out of battery for 5 hours A:

Dear, vivox27 has been running out of power for 3 years and the battery is out of power after 5 hours, the reason is that there are too many applications running in the background of the mobile phone, too many functions turned on the mobile phone or the solution caused by the hardware problem of the mobile phone: turn off WLAN, mobile network, Bluetooth, GPS and other services that are not commonly used when standby, and turn it on again when needed; Close the background running programs that you don't need, and then turn on the power saving mode; Adjust the brightness of the screen to suit use, and the screen adjusts to high brightness and consumes more power. If my answer was helpful, please give it a thumbs up (rate it in the bottom left corner).

The vivox27 used 3 years of battery and ran out of battery after 5 hours.

Dear, hello, I'm glad to answer for you: vivox27 has been out of battery for 3 years for 5 hours The reason for the reason is that there are too many applications running on the phone after Wu Qiaotai, too many functions turned on the phone or the solution caused by the hardware problem of the mobile phone:

Turn off infrequently used services such as Wi-Fi, mobile network, Bluetooth, and GPS when you are on standby, and turn them on when needed. Close the background running programs that you don't need, and then turn on the power saving mode; Adjust the brightness of the screen to suit use, and the screen adjusts to high brightness and consumes more power. If my answer was helpful, please give it a thumbs up (rate it in the bottom left corner). You can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and finally wish you a happy life!

In the past, the mobile phone sail was slowly charged once, which Wu can be used for a day, but a few days ago I used the alink mobile phone to project the computer, and after I used it a few times, the battery of the pure hand machine was not used.

Kiss,Is it a situation where there is no disassociation after projecting the computer?

It's canceled because it's wired projection.

Did you try to restart the phone?,Sometimes the background doesn't show up, so it's still in the link by default.

No, there are no other apps in the power consumption ranking.

Is it a kiss to replace the charger or other things that are commonly used, and the mobile phone battery has been used for a long time.

This phone has been used for 3 years.

There was no replacement of the charger.

Dear, that's the reason for the aging of the mobile phone battery.

The standby time of the mobile phone is determined by the usage of the individual, and if you use the mobile phone all the time, it will consume a certain amount of powerYou can check out the following reasons why your phone drains battery fast:

1. Changes in mobile phone hardware are a major reason for the increase in power consumption: The increase in computing speed and the larger screen also mean that the phone needs more power.

Second, the increase in power consumption caused by the increase in functions:WiFi, Bluetooth, 4G network, massive application software, the use of these functions does not require the support of electricity, especially on the mobile phone**Internet**, playing games and other behaviors, which consume the power of the mobile phone abnormally.

3. Not developing good usage habits is also an important reason for high power consumptionMultiple services and background programs run at the same time, and the power consumption of the mobile phone will naturally increase in the process of continuous high-intensity operation.

If you want to extend the standby time of your phone, you can use it as follows:

1. Turn off the power consumption service in time

The wifi is not turned off, and the power is like running water, because in the environment where the wifi is turned on and there is no wifi, the mobile phone will keep searching for wifi, and this process is particularly power-consuming. So, remember to turn off the wifi when not in use.

In the same way, do not turn on mobile network, Bluetooth, GPS and other services when not in use, and remember to turn them off after use, otherwise the battery will also fall down.

2. Close unwanted background runners

If the software is not used in the background, it does not mean that it is not running and does not occupy memory, in fact, the software is always running in the background, which will inevitably consume power.

FunTouch OS System:Press the left button and click "X" to close the program running in the background.

1. Press the left menu button on the desktop of the mobile phone.

2. Click the fork to delete.

FunTouch OS for the following systems:Press and hold the home button in the middle and click "One-click Acceleration" to close the program running in the background.

1. Press and hold the home button in the middle.

2. Click one key to accelerate.

3. Appropriately reduce operations such as sliding and unlocking

People with OCD on mobile phones should remember that endless swiping, unlocking, reading messages, removing red dots, and completing a series of actions to feel at ease is a great waste of power. Appropriately reduce swiping and unlocking to reduce power consumption.

1. When we don't use the vivox7 mobile phone, turn off the wifi, mobile network ruler Huluo, Bluetooth and other unused functions to reduce the consumption of the mobile phone.

2. Enter Phone Manager, click Background Programs, and click One Click to clean up the running programs in the background.

3. Enter the mobile phone manager, enter the power-saving mode, and manage the battery consumption.

4. When we are charging, try to use the original charger for charging, and it is recommended not to play with the mobile phone while charging, so as not to damage the use time of the mobile phone battery.

5. If the above methods cannot solve the problem of fast power consumption of vivoX7 battery, Lingmo block recommends returning to the factory for maintenance. Contact after-sales service to solve. Coding fiber.