The microphone on my computer somehow didn t go off, so I asked the computer guy for help

You can try restarting your computer with the microphone connected.

1. Confirm whether the microphone jack is connected correctly, generally headphones with microphones have two sets of wiring plugs, one is a green plug, that is, the headphone audio signal, and the other group is a red plug, that is, the microphone signal input. First make sure that the red plug should be connected to the red jack corresponding to the computer panel, usually with headphone and microphone icons.

2. Confirm whether the sound card driver is normal, open the Device Manager, check whether there are any items with exclamation marks or question marks anywhere in the Device Manager, and then check the plus sign in front of "Sound, ** and Game Controller" to see if there are any items with exclamation marks or question marks below. If so, the sound card driver is not normal or not installed, and you can reinstall the sound card driver.

3. Right-click the volume icon in the lower right corner of the taskbar, select "Turn on Volume Control", click "Options" in the upper left corner, select "Properties", pop up the "Properties" dialog box, tick all items under "Show the following volume controls", click OK, check if there are any items in the mute state in the "Volume Control" window, remove the tick in front of mute below all items, and then adjust the volume of all items to maximum, and then try to chat with the other party's language.

1. Your cable may be plugged in the wrong way, it is best to plug it in the back and insert the microphone into the hole with the MIC logo.

2. The microphone is not turned on: start-control surface.

Affiliation Board - Sound & Audio EquipmentCheck if there is a microphone device, if not, reinstall the sound card driver.

3. The easiest test method is to turn on the recorder and test whether there is any sound.

4. Set up the problem Double-click the speaker icon in the lower right corner, then select -Options-Properties-(Drop down to find) Microphone-Tick-OK, and then remove the mute option in the microphone option.

The computer microphone can not speak, and you need to plug in and unplug the microphone again and set it up.

First of all, the microphone should be connected to the correct one, the microphone on the computer is connected to the pink jack, don't connect it wrongly, there will be no sound if it is wrong.

Microphone settings: small speaker in the lower right corner Right click Recording device: Set the existing microphone as the default device during recording.

Then double-click the microphone or dot properties in the level to adjust the volume of the microphone and the microphone enhancement (this is adjusted appropriately, turn up the amplification, some computers will have current sound), and select noise suppression and echo cancellation in the enhancement field.

Select Listen to this device in the listening, you can hear your own voice (this normal use is not selected, some computers will freeze or have noise).

If you have a problem with the sound card driver, you can reinstall the sound card driver.

Turn on the audio recorder.

In the beginning of the entertainment.

Then blow all the way into the microphone.

If there is no response, keep blowing, and then turn the plug, yes, the plug oh keep turning, to see if the recording has fluctuations, if so, just adjust it to a stable time.

You see if the front bezel setting of the computer is not turned on.

For XP system, find the mixer, there is something like a small wrench in the upper right corner, click on it, find it, disable front panel detection, and put a checkmark on it.

Are you plugging in the audio output on the front panel or the audio output on the back motherboard?

If it's the front,Maybe the audio output settings on the front panel haven't changed.,It's OK to change the wine according to the method upstairs.,If it still doesn't work.,Open the case to see if the audio cable on the motherboard is loose.,Or the audio cable on the front panel is loose.。

If the audio output on the back motherboard is plugged in, it may be that the driver is not good, and the driver is not compatible with the motherboard.

The front-facing headset and headphone jack of the Realteck HD Audio sound card cannot be used.

This is due to the new features of the latest official Realteck sound card driver itself, not the system. If you encounter this situation, you can go to the Control Panel""Sound, voice, and audio devices"Find "Realtek HD Audio Manager --> Audio O -- Connector Settings -- Selected"Disable front panel jack detection"。

Control Panel – Sound & Audio Devices – Audio – Recording: Select Device, Volume: Mute Unchecked. There is also the voice part that should also be turned down.

Simple! The hole is plugged in incorrectly, or it's broken! Examine!

Plug the headphones into the back panel and you're good to go.

Click on the small speaker in the lower right corner, there is a microphone in it, you can see if it is muted, remove it and it's OK.