What should I do if the screen recording sound of Huawei phone is low

If your phone uses the screen recording function, the recording is **, and the recorded sound is smaller than the source**, because when the system sound is recorded, the recorded sound and the set volume are the same, and the louder the current system tone, the louder the recorded sound.

What should I do if the screen recording sound of Huawei phone is lowWhat should I do if the sound is too low or no sound when I use the phone screen recording feature to record**? Below, Xiao 8 shares the mobile phone recording**The sound is too small, what should I do?

Tool raw iphoneios

Method: Read step by step.

Open the control center page of your phone, press and hold to open screen recording.

There is a microphone underneath the screen recording.

Tap to turn on the microphone, and red is on.

Then press the volume button on the left side of the phone, and the volume adjustment will appear on the desktop, turn the volume to the maximum.

Turn up the sound and tap Start Recording.

When the recording is complete, click on the preview to hear the sound. In the process of using the mobile phone, sometimes the picture in the screen is horizontal, at this time, you need to rotate the screen 90 degrees to be better**, here is an introduction to how to set the screen rotation on Huawei mobile phones for reference.

Tool raw materials Huawei mobile phones.

Method: Read step by step.

Press and hold the top of the phone screen and swipe down.

After swiping, a list of switches will be displayed at the top of the screen, and if there is no switch that automatically rotates the screen, you can click the button on the diagram.

Press and hold the Auto-Rotate switch below and drag it upward.

After dragging the [Auto Rotation] switch to the top, tap the switch to make it bright, and the screen will automatically rotate 90 degrees when the phone is placed horizontally.

In addition, you can also open the settings interface of your phone and click the [Display] option in it.

Click the switch to turn on the [Auto Rotation] and [Smart Rotation] options.

Precautions. This experience is based on the Android system, if the corresponding settings are changed after the mobile system is upgraded, this experience may not be applicable to other versions of the mobile phone system.

Please turn up the system volume. If the user's system volume is set too low or muted, it will cause silence.

If the sound is made by a third-party app, turn up the volume of the third-party app during screen recording.

After asking the customer service, they all said that the screen recording specifications are like this, when the system sound is recorded, the sound of the screen recording is the same as the volume set, the louder the current system sound, the louder the screen recording sound.

Hello, glad to answer for you. There are three possibilities for recording very quietly: 1. The microphone port of mobile phone recording is blocked or the microphone is damaged. 2. The volume of the mobile phone is turned on very low, so I can't hear it.

Just press the volume plus volt button to try; 3. The recording distance is too far, resulting in a small recording sound that cannot be heard, and this situation can only be listened to with the maximum sound, or if it is not possible, it can only be listened to with the help of a computer. When recording or recording, if the first-hand target is too far away from the phone or the microphone is blocked, the sound will be quiet. It is recommended that you keep the microphone unobstructed and the target within 2 meters of the mobile phone when recording or recording. Press the volume up button to turn up the volume.

Hope the above helps.

Take the Huawei P50 Pro phone as an example:

1. Use key combinations to record your screen.

Press and hold the power button and the volume up button at the same time to start the screen recording, and press and hold again to end the screen recording.

2. Use the shortcut switch to record the screen.

1.Swipe out Control Center from the top right side of the screen, tap the shortcut bar button, and tap Screen Recording to start screen recording.

2.Tap the red timer button at the top of the screen to end the screen recording.

3.Go to the gallery to view the screen recording result.

3. Use two knuckles to record the screen.

1.Before using knuckles, go to Settings > Accessibility > Quick Start & Gestures > Screen Recording and make sure the screen recording switch is turned on.

2.Double-tap the screen with a little force and quickly and continuously double-click the screen to start the screen recording, and double-click again to end the screen recording.

Fourth, while recording the screen, while explaining.

When recording the screen, you can also turn on the microphone to record the screen and explain at the same time.

After starting the screen recording, tap the microphone icon to turn it on, and you can record the sound synchronously.

Reminder: When the microphone is turned off, it can only record system sounds (e.g. **). If you don't want to record any system sound, please mute your phone and turn off the **etc** sound before screen recording.

Turn on the screen recording of the phone, check whether the microphone sign in the upper left corner of the phone is turned on, and turn off the microphone if you don't need external sound.

Here's how to solve the problem of no sound in chat screen recording on Huawei phone**: 1. Turn on the microphone permission. If you want to get the sound source when the screen recording software of your Huawei phone is working, you must turn on the microphone permission for it.

How to do it: Click Settings, Apps & Services, and App Management on the desktop, click the function button in the upper right corner of the app management window and select Show System Programs, then tap Screen Recording in the app list, then click Permissions, Microphone, and select "Allow during use only" in the Microphone Permission window.

2. Turn on the "Use microphone at the same time" function. If another app is using a microphone while recording your screen, the screen recording app won't be able to get sound through the microphone. At this time, you need to set the microphone to sharing mode

From the desktop, click Settings, Apps & Services, Permission Management, and Microphone, and then turn on the "App uses microphone at the same time" feature in the microphone window.

3. Turn on the microphone when recording the screen. When recording a screen, the screen recording app will display a toolbar on the screen, including the microphone function switch. If the microphone icon is disabled, you can't record sound.

At this time, just click the microphone icon to turn on the microphone, and the screen recorder can get the sound normally.

When you use the screen recording app for the first time, the app will pop up a permission request window, including storage permission and microphone permission, if you don't give the app these two permissions, then there will be no sound or can't save when recording the screen.

Summary. 1.The use of third-party holsters and films will affect the sound effect of the call.

If you use an irregular third-party leather case or leather case, the volume hole is blocked, and the audio effect cannot be guaranteed to reach the level of the original film, please remove the irregular third-party film or leather case, and go to Huawei's official after-sales service to replace the original film or leather case of Huawei's official adaptive product.

2.Try cleaning the horn dust filter.

You can use a soft, long-bristled brush dipped in alcohol and scrub the dust filter inside the sound hole to see if the sound returns to normal.

3.Poor mobile phone signal or network quality affects the sound of the call.

Poor signal or network quality: It is recommended that you move to a place with good signal and network quality.

4.The phone uses advanced on-screen sound technology, and the best listening position is 2 cm from the top of the screen.

Its sound position is different from the traditional earpiece, if the user is not aimed at the corresponding position, the sound will appear slightly smaller, the user may move the phone during the call, the earpiece may cause the sound of the earpiece to be small, please note that you need to align the screen sound position: it is recommended that when you are talking, close your ears to about 2 cm away from the top of the phone, so that the experience will be better. (Two weeks before the new phone, there will be a call location prompt).

5.The phone has added a smart volume adjustment function, which may make you feel that the call is slightly quieter.

Why is the sound of Huawei phone recording very small.

1.If a third-party holster or film is used, it will affect the sound effect of the call. 2.

Try cleaning the speaker dust filter, you can use a soft, long-bristled brush dipped in alcohol, brush out the sound hole, and see if the sound returns to normal. 3.Poor cell phone signal or network quality affects call sound signal or poor network quality

It is recommended that you try it in a place with good signal and internet quality. 4.The mobile phone uses advanced screen sound technology, the best listening position is 2 cm away from the top of the screen, its sound position is different from the traditional earpiece, if the user does not align the corresponding position, the sound will appear slightly smaller, the user may move the phone during the call, the earpiece sound is small, please note that you need to align the screen sound position:

It is recommended that you put your ears close to the top of the phone about 2 cm away from the top of the phone when you are talking, so that the experience will be better. (There will be a call location prompt for the first two weeks of the new phone)5The phone has added a smart volume adjustment function, which may make you feel that the orange cover of the call is slightly quieter.

If you still can't solve the problem, please back up the vertical data of your limbs in advance (WeChat QQ and other apps need to be backed up separately), and bring the purchase voucher to the nearest Huawei Customer Service Center for maintenance.

If you are using a Huawei phone and there is no sound when you use screen recording** or no sound when you have recorded **files**, please follow the following methods to troubleshoot:

1. Adjust the system volume.

If the user's system volume is set too low or muted, the screen will be silent, please press the volume button to increase the system volume during screen recording.

2.Adjust the volume of third-party apps.

Since the volume can be set by the third-party app, if the volume is set too low, the screen recording will be silent, if the sound is emitted by the third-party app, please turn up the volume of the app during the screen recording process.

3.Turn on the prompt box "Enable microphone to record ambient sound" optionWhen you start recording, the switch in the pop-up prompt box "Enable microphone to record ambient sound" is turned off, which will cause no sound during recording.

When emui starts and Magic UI starts, tap the microphone icon to turn on the microphone while recording the screen to record ambient sounds.

When recording the screen, when you click the microphone button, you can turn the microphone on or off, and the corresponding recording sound is as follows:

Turn off the microphone, and turn off the sound: You can record a silent screen.

4 Close apps that are taking up audio channels.

Since the priority of the audio channel is the first to be used. If audio channels are occupied by voice-related applications, they will occupy the system microphone resources, resulting in no sound recording. Please close the voice application software or live streaming software that occupies the audio channel before recording the screen.

5 Check if the headphones are connected.

If your phone has been connected to the headphones, it is recommended that you disconnect the headphones and record the screen for the following reasons:

It is recommended to unplug the headphones and then record the screen, at this time, the system sound is output from the speaker and will be recorded by the mobile phone as ambient sound.

How to turn on the microphone: After starting the screen recording, tap the microphone icon in the upper left corner of the screen to turn it on.

6 Turn on the automatic management switch for screen recording.

The screen recording function of the EMUI Magic UI system is controlled by Phone Manager, please go to Settings, search for and enter Startup Management App Startup Management > 3 Dot Buttons Show System Programs > Select Screen Recording to turn on the Auto Management switch.

Hello you, I'll answer this question for you. If your phone uses the screen recording function, the recording is being recorded, and the recorded sound is smaller than the source, because when the system sound is recorded, the recorded sound and the set volume are the same, and the louder the current system sound, the louder the recorded sound. Solution: