How do I connect my computer to my printer, and how do I connect my printer to my computer?

1. Open the settings interface and select "Devices".

2. Click the "+" button on the left side of "Add Printer or Scanner";

<>5. There will be a driver that asks you to install it, if you have installed the driver in the computer before, you will choose to use the current driver, if not, you need to reinstall the driver.

6. After all is completed, the name of the printer will appear (you can change it by yourself), whether you need to share, set it as the default printer, and operate according to your own needs;

<> will finally find that the printer has been installed, as shown in the image below

1. The first step is to click to open this computer.

2. In the second step, open the settings, and in the pop-up settings box, select the second device.

3. Step 3: Click to select Printer and Scanner.

4. Step 4: After entering the printer and scanner, find Fax and click on the open queue below.

5. The fifth step, open the queue and click on it, pop up Windows Fax and Scan, and then click on the new scan below.

6. Step 6: Click to select the printer connected to the computer.

7. In the seventh step, you can use the printer.

Lingxiang printer can be connected to the computer, which can be connected through a data cable, and if there is a printer device with a network, it can also be connected wirelessly, basically these two connection methods.

You can connect the printer and computer directly through the printer cable, or if the printer is a network printer, you can connect the printer and computer over a local area network.

Answer: Click [Start] to print the test page, then click [Next], keep [Set as default printer] unchanged, continue to click [Next], uncheck the unwanted software, click [Next], and finally select [Exit] to complete the installation of the printer.

The hardware is installed and the driver can be installed with the driver software, which is convenient, 360 driver master, driver wizard or Lu master can be.

Operating computer: Lenovo R9000

Operating system: Windows 10

The steps to add a scan to a computer connected to a printer are as follows:

1. First open Windows Settings in your computer, and then click on System Options.

2. After entering the system options, tap Sound first, then tap Bluetooth and other devices.

3. In Bluetooth and other devices, tap Printers & Scanners, and then tap Add Printer or Scanner.

Precautions for using the printer:

1. Do not turn off the power switch or shake the printer, open the cover plate of the printer, open the paper box, etc. during the normal printing process, so as not to cause the printer to malfunction, jam or affect the printing effect.

2. Try not to open the top cover or baffle when it is not necessary, direct sunlight or strong light will reduce the performance of the printer.

4. If you need to open the cover or pull out the paper box when you need to open the cover or pull out the paper box, you must cut off the power supply first, and pay attention to the gentle action, do not cause damage to the printer by deadlifting, because the area around the output tray will become very hot during printing, pay attention to hot hands during operation.

5. During the printing process, the printer can not print or stop printing in the middle of printing, observe the prompt light on the printer operation panel to judge what the fault is and then solve it, if you can't judge, contact the network administrator in time to solve the fault.

6. When adding printing paper, the feeding tray cherry blossom and which paper should be placed in a ridge code must be moderately tight, and the paper should be placed neatly, otherwise it is very easy to jam.

7. Pay attention to the cleanliness around the printer, and do not drop paper scraps or other sundries into the printer, so as not to cause weak damage.

8. When the print volume is too large, the print volume should be kept within 30 copies, and the printer should rest for 5-10 minutes to avoid damage due to overheating.

9. Do not open the cover plate and take out the toner cartridge when the printer is out of ink, so as not to damage the printer caused by improper operation; Contact your front desk or network administrator to replace the toner cartridge in a timely manner.

10. When printing on both sides: it should be typed in batches to reduce the possibility of problems; Don't hit one side immediately after playing the second side, it's easy to jam. You can roll the paper in reverse, press it flat, and wait for the paper to be flat before printing; The method of putting paper on the second side is:

Turn the printed page downwards with the bottom of the page first. <>