How do you put water in a dismantled water heater? How to disassemble the water heater

First, turn off the water supply switch of the water heater at home, and turn the mixing valve of the water heater to the hot water stall.

Straighten the handle of the safety valve of the water heater so that the nozzle of the water heater is interconnected with the safety valve, so that the water in the inner tank of the water heater flows out of the pressure relief pipe of the safety valve and the water is cleaned.

The water can also be drained through the blowdown valve. It is more thorough to close the inlet valve first, and then open the blowdown valve to discharge the water.

It is important to note that the next time you use it, you must fill the water heater with water before heating it with electricity.

There are three ports at the bottom of the water heater, two of which are connected to the water pipe, which are the water inlet and the water outlet, these two do not move, and the other thing covered with a plastic cover is called the sewage outlet, release the water from here, first break the sluice, open the mouth, and the water will come out, but it is recommended to find Haier after-sales service to help you get it, and it is easy to get dangerous yourself, such as running water, or scalding.

There are three ports at the bottom of the water heater, two of which are connected to the water pipe, which are the water inlet and the water outlet, these two do not move, and the other thing covered with a plastic cover is called the sewage outlet, release the water from here, first break the sluice, open the mouth, and the water will come out, but it is recommended to find Haier after-sales service to help you get it, and it is easy to get dangerous yourself, such as running water, or scalding.

Water Heater Disassembly Steps:

Tools Raw materials: water heater, wrench.

1. Remove the hose first and drain the water in the water heater.

2. Then two people work together to lift the water heater up a little and then move it outside.

3. Electric water heaters are generally hung on the wall, if they are fixed with screws, loosen the screws first.

How Water Heaters Work:

A complete household multi-function water heater consists of 2 main parts:

1. Its internal structure is mainly composed of four core components: compressor, condenser, expansion valve and evaporator.

2. The working process is as follows: the compressor compresses the refluxed low-pressure refrigerant, turns it into a high-temperature and high-pressure gas flowing through the pipeline, and the high-temperature and high-pressure gaseous refrigerant flows through the copper pipe wound around the outside of the water tank, and the heat is conducted into the water tank through the copper pipe for heat exchange, and the cooled gaseous refrigerant becomes liquid under the continuous action of pressure, and enters the evaporator after passing through the expansion valve, and the pressure of the evaporator decreases suddenly.

As a result, the liquid refrigerant quickly evaporates into a gaseous state and absorbs a large amount of heat. At the same time, under the action of the fan, a large amount of air flows through the outer surface of the evaporator, and the energy in the air is absorbed by the evaporator, and the air temperature decreases rapidly, turning into cold air and discharging into the kitchen. The refrigerant, which has absorbed a certain amount of energy, then flows back to the compressor and enters the next cycle.

3. From the above working principle, it can be seen that the working principle of household multi-functional water heater is similar to the principle of air conditioning, and the reverse Carnot principle is applied, which absorbs a large amount of low-temperature heat energy in the air, and becomes high-temperature heat energy through compression of the compressor, which is transmitted to the water tank and heats up the water.

The whole process is an energy transfer process (from air to water), not an energy conversion process, without heating hot water through electric heating elements, or burning combustible gas to heat hot water.

Open the drain screws.

1. Turn off the water inlet valve and unscrew the water inlet and outlet pipes connected to the water heater.

2. There is a safety valve at the connection of the water inlet, after unscrewing it, the water in the water heater can be discharged, if you don't unscrew the safety valve, the edge of the water heater will not be clean.

If the water quality in the sink is poor, then you can turn off the power first, then turn on the hot water in the bathroom, and wait for three minutes for the hot water to drain out.

Precautions for the use of water heaters:

1. When using the water heater, you need to operate according to the instruction manual of the water heater, because there are many water heater brands on the market, so there will be certain differences in the use of different brands.

2. When using the water heater, it is best to open the window or exhaust system at home to avoid hypoxia or carbon oxide poisoning.

3. Do not use the water heater for a long time, you can turn off the water heater when you are not using it, so as to better ensure personal safety, and turn on the water heater before taking a bath.

1. If needed, first of all, close the water inlet, that is, close the tap water inlet valve of the water heater. 2. Adjust the water heater mixing valve to the position of "full hot water" and open it. 3. Use a wrench to unscrew the plug at the bottom of the water heater, and then discharge all the water inside the water heater and the dirt at the bottom of the inner tank.

4. Open the tap water inlet valve, flush the inner wall of the water heater and discharge it from the sewage outlet; After cleaning, screw back the drain plug and fill the water heater with water.

1. The inner tank in the water heater must need to be cleaned, after the inner tank is used for a long time, it is inevitable that some dirt will be generated, when cleaning the inner tank, you need to turn off the switch of the water heater first, and then open the cover on the side of the water heater, you can see the inner tank, and then take out the inner tank and clean it with a brush, and then put the inner tank into it after cleaning.

2. When cleaning the dirt in the water heater, you can pry open the sewage outlet on the water heater, and then drain all the water in the water heater. In the process of drainage, some dirt in the water heater will also be discharged, and then we use a hose to connect to the hot water outlet of the water heater, open the faucet at home, so that the water will automatically enter the water heater, rinse and rinse several times, and then drain all the water from the sewage mouth, so that the cleaning effect is relatively thorough.

Of course it can't be dismantled. The inlet valve of an electric water heater is usually under the water heater, and you can open the inlet valve when using the water heater, and if you want to suspend the use of hot water, you can gently close the water valve after the power is disconnected. In addition, if the inlet valve of the electric water heater is removed, the water heater has a water pressure problem, and the main switch at home needs to be turned off, which invisibly increases the working procedure.

What is the reason why the inlet valve of the electric water heater cannot be removed?

It is an important device to ensure the pressure in the inner tank, and to ensure that the maximum pressure in the inner tank cannot exceed the upper limit of the safe setting, which is a key valve. If the pressure is too high, it will cause the liner to rupture. Once the pressure is too high, the valve can be closed to protect the inner tank.

It is possible to clean the inner tank of the electric water heater and maintain the electrical appliances, because this can turn off the water and provide convenience for it. If the water heater is not installed when the water heater is installed, it will cause a certain difficulty for the regular cleaning of the electrical appliances, and if the inner tank cannot be cleaned for a long time, the water temperature heating time will be prolonged, and the service life of the electrical appliances will also be shortened.

The electric water heater is not used for a long time and cannot store water for a long time, so you can close the water inlet pipe and drain the water in the inner tank, so that when there is no one at home, you can better protect the electrical appliances and prolong the service life of the appliances.

Do the math how much it will cost you to renovate your home

In our daily life, many people will install various types of water heaters in their homes, and it is inevitable that we will have to disassemble the water heater for maintenance or testing during our use, and how to remove the water heater.

1. How to remove the water heater.

1. Remove the hose first, and drain all the water inside 2. Then take down the water heater hanging on the wall, and use the screw destroyer knife to unscrew all the screws fixed around the water heater. 3. Finally, after opening the lid, we can remove the water heater.

2. What are the precautions for using water heaters?

1. When we use the water heater, we should regularly clean the filter inside the water heater, if it is not cleaned for a long time, it is easy to cause blockage and bring unnecessary damage to the water heater.

2. If the water heater is not used for a long time, we need to unplug the power plug of the water heater, so that the water heater will not be in a burning state all the time, which can prolong the life of the water heater.

3. In the case of thunder, we must unplug the power plug of the water heater to prevent lightning from damaging the circuit of our water heater, resulting in damage to our water heater, resulting in fire, which brings great danger to our lives.

4. When we choose a water heater, we must choose a regular brand of water heater, and we must not use the water heater without a brand to prevent a series of dangerous situations such as leakage.

The above is a summary of the relevant content and information on how to remove the water heater, I hope it can help you. If you have any other questions, you can leave a message at the bottom of the platform, and we will solve the problem for you in time. Finally, if you have any questions about home furnishing and home improvement, you can pay more attention to Qeeka Home.

Enter the area and get the decoration for free**].

The steps to remove the reeds from the water heater are as follows:

1.Turn off the water heater's power or gas valve.

2.Disassemble the water pipes and gas pipes of the water heater, and pay attention to loosen the screws on the pipes with tools.

3.If the water heater is wall-mounted, the hanger needs to be removed first. The hanger is usually fixed to the wall with expansion screws and needs to be removed with a wrench or screwdriver.

4.Depending on how the water heater is installed, remove the bracket that is fixed to the wall or floor. The bracket also needs to be removed with a wrench or screwdriver.

5.If there are other accessories on the water heater (such as faucets, valves, etc.), they also need to be removed.

6.Finally, remove the water heater from the stand, noting that the water heater is heavy and requires two people to operate it together.