You can use the adhesive tape inside the newly bought refrigerator without tearing it, right?

The adhesive tape inside the newly bought refrigerator should be removed, and the heat dissipation of the refrigerator is on both sides of the refrigerator, and this film will hinder the heat dissipation of the refrigerator.

Proper way to use the refrigerator:

When placing the refrigerator, you should generally reserve a distance of 5 to 10 cm on both sides of the refrigerator, 10 cm on the top, and 10 cm on the back side, so as to help the refrigerator fully dissipate heat. Otherwise, the heat of the refrigerator will be stored in the back or sides of the refrigerator and will not be well dissipated. In addition, there should be vents around the refrigerator, or there should be vents not far away that can form a backflow with the heat dissipation channel of the refrigerator, so that the heat of the refrigerator can reach the vents.

In addition, the refrigerator should not be placed together with other household appliances such as stereos, TVs, microwave ovens, etc., as the heat generated by these appliances will increase the burden on the refrigerator and increase power consumption. Also stay away from heat sources and avoid direct sunlight, as this heat can also put a strain on the refrigerator. In short, when it comes to placement, we must keep the refrigerator away from the heat source and fully dissipate heat.

Good placement can also be effective in reducing noise. To place the refrigerator in a flat and firm place on the ground, adjust the bottom corner balance so that it is on a flat surface, you can also raise the refrigerator by 3-6 cm and adjust the corner balance to increase the air convection space at the bottom of the box and reduce noise, in addition, check whether the parts are loose to avoid resonance.

It is best to tear it off and reuse it, because the outer wall of the refrigerator will heat up during use, and the thin tape will melt on it and it will be difficult to clean.

If you want to tear it off, the outer wall of the refrigerator will heat up during use, and the thin adhesive tape will melt on it and it will be difficult to clean.

It's best to tear off the useless tape, because the tape will no longer be sticky after freezing

It's best to tear it off, it sticks after a long time, and you can't tear it off if you want to.

Summary. Kiss, this is a <> to be torn off

Kiss, this is a <> to be torn off

If you buy a new refrigerator, you should tear off the thin film on the outside. The function of the film of the refrigerator shell is to protect the outer hall from the <> of scratching during the production and transportation process

The film behind the refrigerator is directly pasted on the heat dissipation net, which not only affects the heat dissipation of the refrigerator and wastes electricity, but also shortens the service life of the refrigerator<>

1. Use a hair dryer to blow on the film at a certain distance, and after heating, the film should expand and can be easily torn off. 2. Sprinkle ice water on the protective film, wait for a while, and slowly tear it off. 3. Use wind oil essence to apply the inner protective film around the hunger stool, and then wipe it with a wet towel, which is effortless and the effect is very good.

Kissing can also be torn off directly, but it may be more difficult to tear <>

Tools to prepare: alcohol, scouring pads, plastic spatula.

Removal method: Step 1: Use a plastic spatula to remove the weathered tape on the refrigerator from the surface of the rubber.

Step 2: Take an appropriate amount of alcohol and apply it to the tape and offset printing.

place. <>

Step 3: After applying the alcohol, wait on the side for about 10 minutes.

Step 4: When the time is up, use a scouring pad dipped in the alcohol solution and wipe it repeatedly where there are traces of tape.

Step 5: After 3-5 minutes, the wiped tape and offset marks can be removed.

Note:

1. It takes some time to erase the traces of tape for a long time.

Can be used as an alternative to alcohol.

2. The surface of the refrigerator is plastic or tempered glass.

The material cannot be used with a shovel, which will damage the surface of the refrigerator.

Tear off the plastic paper on the outside of the new refrigerator before use, otherwise there will be problems with heat dissipation. The new refrigerator film is to keep the refrigerator from scratching, and it must be removed before use to prevent the surface of the refrigerator from corroding the box. You can use a sharper, dummy blade and gently swipe along the edge of the film before removing it.

The precautions for the use of the new refrigerator are as follows:

1. The refrigerator should be placed in a well-ventilated place, at least 10 cm away from the wall, so that the refrigerator can quickly dissipate heat when working and prolong the service life of the refrigerator. It is closer to the kitchen, it is more convenient to take food, shorten the time to turn on and off the refrigerator, and can save electricity. Avoid direct sunlight and make sure the refrigerator is flat.

3. The refrigerator should be equipped with a special three-pin socket and be wired separately. For users who do not have a grounding device, a grounding wire should be installed. When setting the grounding wire, you can't use tap water and gas pipes as grounding wires, let alone connect to the ** line and lightning rods;

4. Check whether the power supply voltage meets the requirements. The power supply used in the refrigerator should be a 220 volt, 50 Hz single-phase AC power supply. If the voltage is too high, the motor coil will be burned out due to too much current; If the voltage is too low, it will be difficult for the compressor to start, resulting in frequent start-up, and it will also burn out the motor;

5. After checking that it is correct, the refrigerator stands for half an hour, turns on the power, and carefully listens to whether the sound of the compressor is normal when starting and running, whether there is the sound of the pipelines hitting each other, if the noise is large, you should check whether the refrigerator is placed in the fast rubber code smoothly, whether the pipes are in contact, and make corresponding adjustments.

6. It should be noted that before storing food, the refrigerator should run no-load for a period of time, and then put in the food after the temperature in the box is reduced.

The refrigerator is a must-have appliance in every round home, especially in the summer, its usage rate is even higher, but many people have encountered this problem when using it, that is, the refrigerator adhesive strip is broken at every turn, and the refrigerator can be used without adhesive strips? What should I do if my fridge doesn't have sealing strips? Let's take a look.

The refrigerator cannot be used without adhesive strips, mainly because the refrigerator door body is designed according to the installation and use of door seal seals.

If your sealing strip cannot be found or broken, it is recommended to try to find a suitable thickness and width of insulation PE strip or rubber and plastic insulation strip, attach it to the edge of the door body where the original door seal was installed, and then close the refrigerator door, and use tape or rubber strip to tighten the door body to make the door body and the box compress each other. The refrigerator door seal not only plays a soft sealing and pasting function, but also has a magnetic strip in the door seal, which is adsorbed on the edge of the box by the magnetic strip.

When it comes to how long the refrigerator seal needs to be replaced, it mainly depends on the degree of aging of the seal, and does not necessarily refer to the time of replacement. The sealing (sealant) of the refrigerator is different from manufacturer to manufacturer, and it generally needs to be ordered to have it, so you can contact the refrigerator manufacturer to purchase it after sale or go to the ** purchase.

Generally, the newly bought refrigerator will have a protective film covering the outside, including the refrigerator door and sides. These protective films are used to protect the appearance of the refrigerator from damage, scratches, or stains. Before installing the refrigerator, it is advisable to remove these protective films.

You can carefully gently tear the protective film off the surface of the refrigerator by hand or with scissors. This will give the refrigerator a neater appearance while keeping the outside of the refrigerator clean and aesthetically pleasing. Please make sure to read the refrigerator's instruction manual and instructions carefully before removing the protective film to ensure proper operation.

1. Use an eraser to slowly rub the edge little by little to remove the marks. If possible, alcohol + eraser works very well. 2. You can take a dry cloth stained with vinegar to cover the entire double-sided tape traces, and wait until the sticky stains of the double-sided tape are completely soaked, and you can easily remove them with a ruler.

3. You can also use heating to soften the adhesive of the double-sided tape: use a hair dryer to blow it to soften the adhesive, and when the adhesive of the double-sided tape becomes weak, it can be easily removed. If there are still small marks, wipe them off with polish remover that removes nail polish.

4. When cleaning, whether it is using polishing water or vinegar, it is necessary to let these supplies be completely soaked with double-sided adhesive marks, so that they can be easily and effectively removed. 6. Use soap and a little ammonia and turpentine to mix liquid, which can remove a lot of dirt and make the glass surface more shiny (this article is applicable to ceramic tiles, ceramics, glass, etc.). 7. Use transparent adhesive with good viscosity to repeatedly stick and tear, and you can remove some of the surface.

8. Wipe it off with a little sodium water, or use paint thinner. 9. Wipe with a cotton swab dipped in nail polishing water. 10. Wipe with wind oil essence.

11. Use a special detergent or sneaker decontamination paste to wipe.

Tearing it off may also affect the heat dissipation of the refrigerator.

If you buy a new refrigerator, you should have the film off the outside.

The film of the refrigerator shell is used to protect the shell from scratches during production and transportation. When using, you need to tear off the film, otherwise it will affect the normal heat dissipation of the refrigerator and increase power consumption.

The refrigerator relies on the metal heat dissipation of its box, the protective film on the side will affect the heat dissipation of the refrigerator if it is not torn off, and the protective film on the front door can prevent accidental scratches on the outside of the refrigerator door, and the heat dissipation of the refrigerator has nothing to do with the refrigerator door.

Extended Materials. A refrigerator is a kind of refrigeration equipment that maintains a constant low temperature, and it is also a civilian product that keeps food or other items in a constant low temperature and cold state. Inside the box there is a compressor, a cabinet or box for ice making for icing, and a storage box with a refrigeration unit.

The refrigerator should be placed in a position that is free from direct sunlight, conducive to ventilation, and at the same time keep a distance from the wall so that the heat generated during the operation of the refrigerator can be dissipated.

Always check the tightness of the refrigerator seal, if the seal is deformed, it will affect the degree of closure of the seam, causing the air conditioner to leak out, thereby increasing power consumption. If the deformation is serious, it should be repaired and replaced in time.

After the refrigerator is used for a period of time, some frost will be produced, if it cannot be frosted regularly, it will affect the cooling effect, and the power consumption will also increase, and even easily damage the compressor. Therefore, whenever you see that the thickness of the frost is more than 7cm, you should defrost it.

The front and rear protective films can be torn off or not, and the impact is not great. But the protective film on both sides should be torn off.

The condenser lines of many refrigerators are on both sides of the refrigerator, and the protective films on both sides affect the heat dissipation of the refrigerator and thus affect the cooling effect of the refrigerator.

Extended Content:How long does a refrigerator last.

1.The life of a refrigerator is actually very long.

Refrigerators are high-end durable goods, and service life is an important indicator. Therefore, in the design, the life span has been carefully considered from the structure, material selection, manufacturing process and other items. Starting from China's development situation in the past 20 years, economic conditions and living standards, the design life of domestic refrigerators should not be less than 15 years.

Foreign refrigerators, due to the continuous upgrading of new types and new varieties, often adopt a short service life in design.

2.Do not intensify washing when discontinued.

It's best not to deactivate. Maintenance personnel remind consumers that if they stop using it for a period of time, the refrigerant solidifies in one place, and the refrigeration pipe is easy to be corroded, especially for those refrigerators that have been used for more than five or six years, if they are not properly maintained, they may not be used in the spring of the next year. The refrigerator temperature can be adjusted to the maximum, which can not only play a role in maintenance, but also save electricity.

The protective film is designed to protect the surface from scratches during transportation.

After you buy it, you have to tear it off If you don't tear it off, it will affect the heat dissipation of the refrigerator, you touch the surface of the refrigerator with your hands, and you will understand the feeling of warmth.

In the same way, the laptop or something, you have to tear off the film when you buy it, and many people also paste a film on the laptop screen, which is completely redundant, and it may also accelerate the aging of the screen.

Do you know that the plastic protective film on household appliances should be torn off or retained?

It depends on your personal preferences.

My suggestion is that the protective film on the side must be torn off, otherwise it will affect the heat dissipation of the refrigerator, and the refrigerator relies on the metal heat dissipation of its box; The protective film on the front door does not need to be torn to prevent accidental scratches on the outside of the refrigerator door, and the heat dissipation of the refrigerator has nothing to do with the refrigerator door.

If you don't feel good-looking, just tear it off, if you don't care, just keep it, it doesn't affect the performance, it's just the difference in appearance.

Yes, if you want to tear it off, not tearing it off will affect the heat dissipation, freshness and other functions of the refrigerator.

To tear off, although I feel that not tearing off can protect the refrigerator, but the protective film will affect the heat dissipation of the refrigerator and reduce the service life, At the same time, the refrigerator is basically powered on 24 hours a day, so that the refrigerator will heat up when you touch it.

Of course you do, otherwise the heat dissipation is not good.