How to maintain a refrigerator that has not been used for a long time, how to maintain the refrigera

At present, more and more people are traveling for long periods of time. So what kind of maintenance should you do for your refrigerator before and after going out? If the refrigerator is not used for a long time, it is best to start the "holiday" mode, if there is no such function, it is recommended to unplug the power supply, and clean it with water and a little dish soap, and then open the door to air dry, so as to keep the box without peculiar smell or mold.

Of course, if the user does not use it for a long time, on the one hand, it will cause odor and mold in the box, and on the other hand, it may accelerate the aging and discoloration of the refrigerator liner. First of all, how long is long? Generally speaking, downtime of more than one month can be referred to as long downtime.

The first, of course, is sanitary. If you've been away for a long time, it's a good idea not to leave items in the fridge that aren't easy to keep, especially food, before you go out. Eat everything you can, or be careful that something gets moldy and turns your fridge into a "green" appliance.

Once you've sorted your belongings, you can take a moment to defrost your fridge, and of course, a frost-free fridge is the only option. After that, wipe the inside of the refrigerator with a clean cloth. When you get home, the first thing you need to do is open the refrigerator door to ventilate and wipe down the inside of the refrigerator again.

If your refrigerator uses a back-mounted condenser, it's a good idea to clean the dust on the condenser to help dissipate heat after the refrigerator is working. The second is for system maintenance. If you're planning to go out for an extended period of time, don't forget to unplug it before you go.

In the event of a power outage, it is best to run the refrigerator intermittently to prevent damage to the compressor and other components. When you get home, clean the refrigerator and don't use it right away. It's best to let the refrigerator run for a short time, stop for a while after every two or three minutes, and so on several times.

Why? We know that lubricating oil is fluid, and when the refrigerator is left for a period of time, it will cause the lubricating oil of some parts to be too thin. When used again, the compressor needs to run continuously for a long time because the internal temperature of the refrigerator is room temperature, and the reduced temperature to the rated temperature requires the compressor to run continuously for a long time.

At this time, the part of the lubricating oil that is too thin will wear out rapidly, which will reduce the life of the refrigerator. Allowing the refrigerator to run for multiple short periods of time allows the lubricating oil to be redistributed within the compressor and infiltrate the parts through intermittent periods. By the way, the newly bought refrigerator has been sitting in the warehouse for some time.

This article [] and all the recipe production methods, articles, knowledge and data published in China Eat Network Catering Encyclopedia are for reference only, please verify by yourself before use, and the risks arising therefrom are borne by you. The "Catering Encyclopedia" of China Eat Network is committed to building a professional life service platform that provides the best practical food, recipes and recipes, professional health knowledge, life hacks, and ingredient introductions.

1.Unplug the refrigerator;

2.Take out everything in the refrigerator, open the refrigerator door and wait for the frost to melt, and then wipe the refrigerator clean from the inside to the outside with a clean rag, there must be no water;

3.When the refrigerator is not in use, the door seal should be padded with paper or other things to prevent the door seal from sticking to the box, if it is not used for a long time, apply some lime powder on the door seal;

4.Set the thermostat adjustment to "0" or "stop" to make the thermostat elastic in a natural state and prolong its service life;

5.Keep it in a ventilated and dry place, away from direct sunlight;

6.It is better to place the refrigerator in a place with a higher temperature, the refrigerator has a low refrigerant freezing point, and you don't have to worry about it freezing;

7.It is best to turn on the electricity once a month, and the compressor will be shut down after half an hour to an hour of normal operation, so as to prolong the life of the compressor.

The refrigerator does not need to be maintained for a long time: 1. Unplug the power plug of the refrigerator, and then get everything out of the refrigerator. Open the refrigerator door and wait for the frost to melt, defrost please do not use sharp tools, the evaporator is made of aluminum, which is easy to puncture.

Then use a clean cloth to wipe the refrigerator clean from the inside out. There must be no water.

2. When the refrigerator is not in use, the door seal should be padded with paper or other things to prevent the door seal from sticking to the box; If you are going to not use it for a long time, just apply some lime powder to the door seal. 3. Set the thermostat adjustment to "0" or "stop" or "max" (strong cold point) to make the thermostat elastic in a natural state and prolong its service life.

4. When moving the refrigerator, please stand upright and move in parallel, do not tilt, to prevent the compressor from falling out of the cylinder. Keep it in a ventilated and dry place, away from direct sunlight; 5. Because the refrigerant freezing point of the refrigerator is very low, there is no need to worry about it freezing, and it is better to put the refrigerator in a place with a higher temperature.

6. If there are conditions, it is best to turn on the electricity once every month, so that the compressor can run normally for half an hour to an hour and then shut down to preheat the compressor.

What to do if the refrigerator is not in use, and you are afraid that it will be idle, then I will teach you how to maintain the refrigerator when it is not in use! Unused refrigerators should pay attention to the following:

1. Unplug the power plug of the refrigerator, and then get all the things in the refrigerator out. Open the refrigerator door and wait for the frost to melt, defrost please do not sharpen, the evaporator is made of aluminum, which is easy to leak. Use a clean rag to wipe the refrigerator clean from the inside out.

There must be no water.

2. When the refrigerator is not in use, the door seal should be padded with paper or other things to prevent the door seal from sticking to the box; If you are going to not use it for a long time, you can apply some lime powder to the door seal.

3. Set the thermostat adjustment to "0" or "stop" or "max" (strong cold point), so that the thermostat can be elastic in a natural state and prolong its service life.

4. When moving the refrigerator, please set up a parallel movement and do not tilt to prevent the compressor from dragging the cylinder. Keep it in a ventilated and dry place, away from direct sunlight;

5. Because the freezing point of the refrigerant in the refrigerator is very low, it is better to put the refrigerator in a place with a high temperature without worrying about it freezing. 6. Everyone thinks that I don't need the refrigerator, what kind of idea do you probably have: I find a plastic bag to cover it to prevent it from falling into the ground, then you are very wrong.

Indoor air contains a certain amount of .

Therefore, please do not cover the refrigerator with a plastic bag, the moisture absorbed by the refrigerator is not easy to dissipate, which will cause corrosion of electrical components and damage to the rust of metal components.

1. Organize the refrigerator. If you don't use the refrigerator at home for a long time, you must unplug it completely, and at the same time take out all the contents of it, and never continue to put it in the refrigerator. And when you remove all the contents of the refrigerator, wipe it clean with a clean towel.

2. The door seal is Yinmin to be dealt with. When your refrigerator is no longer in use, use paper or other things to seal the door, the main purpose of which is to prevent the seal from sticking to the box. Also, if you don't need to use the refrigerator for a long time, you can also apply some lime powder to the seal.

3. Placement of refrigerators. Since the refrigerator has a very low freezing point of refrigerant, don't put the refrigerator in a place that is too cold, it is better to put it in a place with a higher temperature. At the same time, remember not to seal the refrigerator!

The refrigerator does not need to be maintained well1Unplug the refrigerator, then remove everything from the refrigerator, open the refrigerator door, and wait for the frost to melt. Please pay attention to defrosting.

Evaporators are prone to leakage. Wipe down the refrigerator from the inside out with a clean cloth. There must be no water.

2.When the refrigerator is not in use, the door seal should be filled with paper or other items to prevent the door seal from sticking to the box; If you don't use it for a long time, you can apply some lime powder to the door seal.

3.Adjust the thermostat to "0" or "Stop" or "Max" (strong cold spot) to make the thermostat flexible in its natural state and extend its lifespan.

4.When moving the refrigerator, make it move in parallel. Do not tilt it to prevent the compressor from dragging the cylinder. Store in a dry and ventilated place away from direct sunlight.

5.Because the freeze point of the refrigerator refrigerant is low, there is no need to worry about it freezing and keep the refrigerator at a high temperature.

6.Everyone thinks I don't need a fridge, what might you think, I'm looking for a plastic bag lid to prevent it from falling, so you are wrong, the indoor air contains a certain amount of water, please don't cover the fridge with a plastic bag. The moisture absorbed by the refrigerator does not dissipate easily, which can lead to corrosion of electronic components and rust of metal parts.

7.It's a good idea to plug it in once a month so that you can turn off the compressor after one to two hours of normal operation. This is very useful.

It's best to have electricity on once a month. One is to avoid the compressor not using electricity for a long time. Due to the precipitation of the lubricating oil, resulting in jamming.

The second is to increase the life of the refrigerator and make the pipes less susceptible to corrosion.

8.Clean the compressor and condenser regularly.

Compressors and condensers are important refrigeration components of refrigerators. If they get dust, it will affect heat dissipation, which can shorten the life of components and reduce the cooling effect of the refrigerator. So, check them regularly if they're dirty and if they do, clean them up.

9.Clean the inside of your refrigerator regularly.

If the refrigerator is used for a long time, the smell in the refrigerator can be unpleasant and even bacteria can grow, which can affect the original taste of the food. So, after using the refrigerator for a while, remove the food from the refrigerator and do a good job of flogger hygiene. Of course, for a refrigerator with photocatalyst deodorization and sterilization functions, the air in the refrigerator will be fresh and clean without any odor, so you don't need to clean the refrigerator frequently.

How to maintain a refrigerator that has been deactivated.

1) Cut off the power to the refrigerator and unplug it.

2) Twist the knob of the temperature controller to the coldest point, so that the spring in the thermostat is in a natural state.

3) Scrub the inside and outside of the refrigerator, remove the dust on the surface of the condenser and compressor behind the refrigerator, scrub the refrigerator liner and all accessories with a special washing solution, and wipe dry with a soft dry cloth.

4) Open the door or open a crack and leave it for about 1 week to dry the inside of the box and release the odor.

5) On the magnetic door seal, apply a layer of talcum powder, or clip a piece of tissue paper to prevent the door from sticking to the box.

6) Open the door every other month, 2 to 3 days each time, to prevent mold breeding in the box and corroding spare parts.