What to do if the speaker of iPhone 6 is low?

It may be because the sound is turned down, click on the sound after entering the settings, and then turn the sound up, or just press and hold the volume up button to turn up the speaker sound.

The speaker is low because the sound is turned down, and you can turn it up again.

The sound of the Apple phone is low, which can be solved by the following two methods. First: In the setting sound interface, adjust the desired sound volume; The second way: set the desired sound size in the secondary screen, taking the Apple 6S mobile phone as an example, the specific operation is as follows:

Method 1: Set the desired sound level on the settings screen.

1. First of all, open and click on the settings in the desktop of the Apple 6s mobile phone, and click on it.

2. Find the sound in the settings and click on it.

3. Then select the desired sound size, and you can slide left and right to complete the adjustment of the size.

Method 2: Set the desired sound volume in the secondary screen, which is relatively simple.

1. First of all, slide the screen of the Apple 6S mobile phone up.

2. The settings auxiliary interface appears, and then long press the sound button on the screen.

3. Finally, you can slide the sound up, and you can adjust the volume down.

<> Notes:

If you have tried the above 2 methods and the sound is still small, that is, the mobile phone has been used for a long time, resulting in the protective net of the earpiece on your mobile phone, which has been sealed by dust for a long time, and you need to clean the air hole or go to the mobile phone repair point to take a look.

It may be due to the setting to turn off all sounds, it is recommended that you turn off all sounds and uncheck the checkmark through your mobile phone settings - My devices - Accessibility - Turn off all sounds.

Setting-Sound-Volume, try to turn up the volume of each item.

If it doesn't work, please back up the data in your phone (contacts, multiple files, etc.) and restore your phone to factory settings. 1.Check that the device microphone is not blocked.

Check whether the "Mute" function on the call interface is clicked.

Try to change to another location (rule out whether it is a network issue).

If your phone supports noise cancellation, it is recommended to cancel the noise cancellation attempt. Operation: Standby interface -**-Menu button -Call setting-Noise Reduction - Cancel checkmark.

If it doesn't work, back up your data and restore your phone to factory settings (Settings - Reset - Factory Reset).

On the front of the Apple iphone6 phone, there are two volume buttons on the left side.

When we are playing **, please press the volume plus button, so that the sound of the call can be adjusted to the maximum, and you can also see the sound level icon on the screen.

In general, the above method can solve this problem. If you still feel that the voice is quiet, please pay attention to the posture of answering **. Since the iphone6 plus is big and long, it may not have been used to it for a while, and it is too far away from the ear.

If it doesn't belong to the above situation, you can also change other ** cards to try it and see if it's a card problem.

If changing the card can't solve this problem, it is recommended to send the Apple phone to Apple after-sales service for testing, whether it is a hardware failure.

Hello. You can go to the phone settings to check the volume setting, if it has been set to the maximum, you can go to the local Apple phone after-sales service staff to help you deal with it.

There is no water ingress, or there are iron filings, there are magnets in the speaker, and iron filings will absorb iron filings.

There is no solution.

Because the Mac is actually not a good machine.

The price of a house in Beijing does not mean that the quality of a house in Beijing is good.

Hello, glad to answer for you :

1: Maybe your mobile phone needs to adjust the sound separately in a separate program, so in the receiving voice interface: a turn on the mobile phone voice paddle, such as the left mute switch paddle, b: turn up the sound, and then listen to whether there is.

2: The other party's voice problem: Please record a piece of your own voice under the premise of 1 and then listen to whether it is out of voice.

3: The earpiece is set to earbud mode, at this time you need to confirm: please insert the earbuds to determine whether this is the problem, if so, please change the corresponding setting interface or contact me.

4: Handset problem: Just turn on**software audition** to judge.

5: Microphone problem, this can be reflected in 3, you can also try with other recording software.

6: The theme mode of some mobile phones causes: For example, the meeting mode causes mute, please try to adjust.

To sum up: Personally, I mainly think that it is more likely, please try it.

Actually, my coming 6sp is similar to your situation.,It's also the source of the sudden bai voice became very small.,At first I thought it was du not the zhi hardware of the mobile phone had a dao problem.。 But the volume adjustment of the mobile phone is normal, which means that the hardware is fine, so I wonder if the sound hole of the speaker is blocked, try to poke a few times with a needle, the sound immediately becomes louder, you can try!

It may be that the BAI phone (MIC) is damaged.

Recommendations:

The subject can be backed up.

zhi data, reset the native to make the dao

With the settings special, the phone belongs.

Factory reset.

It may be a leakage or variable value fault of the component.

Recommendations:Reweld or replace the audio.

The steps to do a factory reset iPhone are as follows:

Open [Settings] -- select [General];

Click Restore;

Select Reset all settings.

It is possible that the hand hoist is blocked by dust, so try cleaning it with a cotton swab. It's also possible that it's about to be damaged.

First, in general, the reason for the small sound:

1. If the microphone (MIC) is broken, you can try to back up the data and reset the settings of the version phone. It may be a component leakage current or variable value failure.

2. If the phone supports noise cancellation, restore the phone to factory settings. (Settings - Reset - Factory Reset). Re-soldering or replacing the audio (power supply.)

Operate. If invalid. Try to change to another location (to rule out whether it is a network problem), and it is recommended to cancel the noise cancellation attempt.

2. The solution is as follows:

1. Check whether the microphone of the device is blocked.

2. Check whether the "Mute" function on the call interface is clicked.

3. Try to change to another location (rule out whether it is a network problem).

4. If the phone supports noise cancellation, it is recommended to cancel the noise cancellation attempt. Operation: Standby interface -**-Menu key--Call settings-Noise reduction-Cancel checkmark.

No need to brush or dismantle, take a card pin and poke the speaker a few times to recover immediately, it's amazing!

Check the volume settings on your iPhone. You can adjust the volume by pressing the volume up and volume down buttons on the left side of your iPhone.

If you're using a third-party iPhone case, make sure that it doesn't block the speakers, microphone, or top microphone. Try removing the case for a call to see if the caller is now able to hear you more clearly, or to see if the speaker is getting louder.

If you haven't already removed the plastic film that was used to protect your display during shipping, make sure the microphone or speaker is not covered, or remove the film completely.

Check that the speaker, microphone mesh cover, and top microphone hole are not blocked by fluff or other debris.

1. To get started, first find the "Settings" icon of the app on the desktop of your phone, and click to enter the new operation interface.

2. Then, after entering the operation interface of the settings, find the "General" option and click to open.

3. After entering the general operation interface, find the "Accessibility" option and click to open.

4. In the "Accessibility" option, find the "Hearing Aids" function and click to enter.

5. Turn on the "Hearing Aid Mode" slide button to turn on the hearing aid mode, so that the volume of the phone will become louder.

The three speakers on the left side of the Apple 6splus are quiet, which does not necessarily mean that they are broken.

In fact, it is also possible that it is blocked, you can take a cotton swab dipped in a little water and reach in to wipe it.

In addition, it stands to reason that the speakers are all in one place, and the three voices on the left are relatively small, which is difficult to find, so maybe it's just your own illusion.

1. To adjust the volume of the call sound, please feel free to open a**.

2. Press Apple's volume plus or minus buttons again to adjust the sound volume to a suitable level, and the volume adjustment icon will also appear on the screen.

Note: 1. If there is still a problem after changing the card, you can also try to restore all the settings of the system at this time. It can be operated in [Settings - General - Restore].

2. If the problem still cannot be solved after resetting the settings, it may be a hardware failure of the Apple mobile phone, at this time, please go to Apple after-sales inspection and processing.

The horn hole is jammed with dust, and the earpiece is the same, just clean it and it's OK, I have experienced it myself.

The phone is getting quieter and quieter, teach you a trick, and the sound will get louder immediately.

The speaker of the iPhone 6S has become very quiet, which can be set in the accessibility function.

How to set it up:1Press the volume "+" button to increase the volume of the call.

2.Go to the settings page.

3.Then find the Accessibility option in your phone's settings and tap on it.

4.Once you're in accessibility, find the Noise Cancellation option. Then make sure that this check box is successful.

5.In the end, if it can't solve the problem, it can be roughly determined that it is a hardware problem with the phone. Please take it to the Apple after-sales service center for maintenance.