What are the pros and cons of electric guitar active and passive pickups? I can add points if I say

Updated on amusement 2024-03-03
13 answers
  1. Anonymous users2024-02-06

    Active pickups, as the name suggests, are active to pick up sounds, usually have an amplifier inside, and need to be driven by batteries (usually 9V), otherwise it will not be able to receive the sound emitted by the strings. The biggest advantage of this pickup is that it is low noise and can obtain high power output at a low cost. The disadvantage is that the electronic flavor is too strong to express the characteristics of the wood of the body.

    The passive pickup is to cut the magnetic field lines of the pickup coil through the strings, so that a microcurrent is generated in the coil and the sound is output. The height of the magnetic column of the pickup, the direction of the coil, and the wood and string material of the body will have a great impact on the sound. Using passive pickups brings out a lot of the details of the sound, but it can also amplify some noise.

    At the same time, the high-power passive pickup has quite high requirements for the process, so the cost is also higher than that of the same level of active pickup.

  2. Anonymous users2024-02-05

    Active pickups are pickups that are battery-powered, while passive pickups are pickups that are not battery-powered. Active pickups generally use ceramic magnets as the main raw material, while passive pickups use magnets as the main raw material. The pros and cons can't be said, each has its own pros and cons, and varies from person to person, such as active pickups, some people like it, and some people say they don't like it.

    I like the EMG81 85 active pickups to be clean, and the single-ken ones are noisy but grainy.

  3. Anonymous users2024-02-04

    Try it on your question.

    The passive one is noisy, so loud that you'll hear a little bit of electricity anyway.

    The active application range is small, so small that most of them are heavy metals in use.

  4. Anonymous users2024-02-03

    I can't answer the landlord's question, but I suggest that the landlord go to "Guitar China" to ask, there are many high-ranking people there.

    I'm not a trust, and I don't need you to give points, I just want to help you.

  5. Anonymous users2024-02-02

    Passive pickups need to be adjusted in height, and if you need something heavier or stronger, then turning your pickups up is the best way to do it, but there's a criterion that if your pickups are too high, not only will they not make the tone better, but they will affect the tone.

    The material of the active pickup is not the same as the passive one, the active pickup uses a magnetic stripe magnet, this magnet has a large power, and the loss of sound is not very obvious, so the requirements for height are not very much, so we don't have to deliberately adjust, the active pickup solves the problem of noise in many of our sections, so many companies are competing to develop active pickups.

    The raw material used in the passive pickup is a magnet rod, and when the string is pushed, if it is not a good pickup, it is easy to lose the tone, that is, the sustain effect is not good, so everyone should pay attention to these problems.

  6. Anonymous users2024-02-01

    This is not necessarily, and active and passive has no absolute relationship, EMG sound dry, not only COB, Metallica and Killer Band Wang Kelly is also using EMG, Megadeth used to use SH4 TB4 now uses SD active, Pandora Dimebag uses Bill Lawrence's 500 model and SD13, in addition to Dimarzio X2N and DP100 are also metal pickups, in this way, The impact of wood on passive pickups is greater than that of active pickups, passive is more flexible than active wood, and the sound is more elastic, and most of the passive clean sound is better than active, but the timbre of passive pickups has a great relationship with the granularity and the strength angle of the hand, the impact of active hand playing technology is relatively small, the advantage of active is that it sounds more neat, it is easier to make a neat rhythm timbre, EMG The most ideal wood is mahogany, followed by Kai wood is not broken wood I forgot, and SD peach core, Poplar, boxwood, alder and Kaimu can be,In addition, the metal timbre has a big relationship with your speaker,The taste is not just the pickup,If the speaker does not match,For example, the whole EMG is connected to a vox sound is not good,Don't look at what the master uses,The master's piano may not be his endorsement of CS,In addition, the master is followed by hundreds of thousands of speakers in many cases, and the lack of the piano is directly found back by the audio equipment,And then most of the masters are used on stage,The stage is changed, On stage, it was just to get an endorsement fee.

  7. Anonymous users2024-01-31

    Passive do not need a battery Active needs a 9V battery, you can see by looking at the back of the piano Generally, there is a battery slot behind the active piano The active piano is less constrained by wood than the passive piano, that is, the active piano does not have high requirements for wood.

  8. Anonymous users2024-01-30

    The better the electric guitar pickup, the higher the gear mold requirements for the device. This is because a good electric guitar pickup requires high signal-to-noise ratio, low distortion, wide frequency response, and other high-quality requirements, which require higher-quality equipment to meet.

    Generally speaking, if you want to get the most out of a good pickup, you need to be equipped with high-quality speakers, amplifiers, audio cables and other equipment. For example, a good electric guitar pickup requires a low noise level, hence the need to use low-noise cabinets and amplifiers; The frequency response range of the pickup is wide, so it is necessary to use a wide bandwidth audio line to ensure the quality of signal transmission.

    In addition, attention needs to be paid to the installation and commissioning of the electric guitar pickup to ensure its best performance during use. The position, height, and angle of the pickup will affect its pickup, so it needs to be carefully debugged and tested.

    To sum up, the better the electric guitar pickup, the higher the requirements for the equipment, which need to be equipped with high-quality speakers, amplifiers, audio cables and other equipment, and carefully installed and debugged to give full play to its best performance.

  9. Anonymous users2024-01-29

    Yes, the better the electric guitar pickup, the more demanding it is on the equipment. The higher the quality of the electric guitar pickups, the more tones they are able to capture, and the better they are able to capture more tones, which improves the sound quality. Therefore, the purchase of pickups with high car quality requires higher equipment requirements.

    To buy a high-quality pickup, first understand the types of pickups, as well as their advantages and disadvantages. Secondly, it is necessary to understand how to install the pickup, as well as the matters that need to be paid attention to when installing. Finally, it is necessary to understand how to debug the pickup, and what you need to pay attention to when debugging.

    Only with this knowledge can you buy the right pick-up cooker to improve the sound quality.

  10. Anonymous users2024-01-28

    To a certain extent, the better the electric guitar pickup, the higher the equipment requirements. Because the better the electric guitar pickups, the more advanced circuit design and materials are usually used to ensure the stability of sound quality and signal transmission, which requires the cooperation of the equipment behind the training, such as the use of high-quality audio cables, audio interfaces and other accessories to transmit the clear signal, and at the same time requires a high-quality preamplifier to avoid losing too much sound detail and dynamic range. Of course, it is important to ensure that the sound quality of the guitar is appropriate, and then it is also important to choose a pickup that suits your needs and economic reality.

    This is the best way to achieve the best results.

  11. Anonymous users2024-01-27

    Hello? 1.The pickup you are talking about is used on the acoustic guitar to connect to external speakers, and it does not need to be plugged in separately, the six holes on the guitar are used to receive the sound emitted by the guitar resonance box, and the other end is connected to the speaker or mixer to play the role of amplification.

    2.Pickup.

    3.The guitar does not need to be plugged in, and the so-called electric guitar has almost no sound when it is not plugged in, but it is connected to the speaker or the effect and uses the effect.

  12. Anonymous users2024-01-26

    Hello'For this bunch of questions'Maybe we didn't answer very comprehensively'Not very specific either'But you can first understand the origins of the guitar'How did the guitar come about. I believe'The above questions'Can be solved very well'

  13. Anonymous users2024-01-25

    Active pickups solve a lot of people's problems about noise, so a lot of companies are competing to develop active pickups, and the active pickups work very simply, he reduces the original power, so that your pickups will be less noisy, but then the sound will laugh and become smaller, and those engineers will add a kind of preamp to the pickups, and the sound will be amplified, so that you will feel that the pickups are fierce, but the noise is small, and this is how the active pickups work Generally speaking, good basses or basses with a lot of timbre variation also use a lot of them, and they need a lot of bass, a lot of power, and they need to power the circuitry to support these pickups, so a lot of brands have active pickups, like Warwick's MEC pickups, and they need batteries to power the tone circuit, and the more circuits, the more noise they have, so they have to choose the active pickup, and that's one of Warwick's features, which is that it can emulate the tone of all kinds of basses, and the electric guitar is much simpler He just needs to reduce the noise, so you can see that guitarists who like clean tones, like death, speed, or high distortion, are going to pick up the active pickups, Seymour Duncan, has a pickup called Livewire, and he describes the power in the catalog: The power of this pickup is not found in this catalog, which means that the pickup has an amazing output and is suitable for super heavy metal**, but I personally think that the EMG pickups do a pretty good job of this Whether in the field of metal, the shouting is a good play in other genres, and SD is unique in the field of passive pickups, and that raw tone with stubble is a favorite of many masters. So is the ST pickup active or purely passive?

Related questions
8 answers2024-03-03

Summary. Hello, I'm glad to ask you this question, the brand of the guitar is generally on the headstock, and you can also see the brand and model through the sound hole. >>>More

6 answers2024-03-03

Speakers Fender 15R or Laney LX20C **are both around 500. >>>More

18 answers2024-03-03

Basically, the brown fingerboard turns black, which means that the moisture and humidity of the fingerboard are quite high at the moment, so that it can't be pushed at all. This is not too clear because it was not used on the spot, and it is generally recommended that unless the humidity is really in a low state, for example, the pores of the fingerboard have white spots, and at that time a thin layer of lemon oil or fingerboard oil is good on the top, and the application method should be to put the fingerboard oil on the piano cloth or toilet paper first, and gently wipe the fingerboard, so that it is good, and then due to the different humidity in the region, there will be different maintenance methods, and the humidity is generally high in the summer of the domestic coastal areas. I would recommend that you don't apply fretboard oil at all at this time, and it's usually fine to apply the oil once a season or two months unless the fretboard is very dirty, otherwise try to do as little as possible: (because of your sweat.) >>>More

3 answers2024-03-03

The acoustic guitar is sounded by the resonance box, and the electric guitar is sounded by the speaker after the pickup installed on the body of the piano to pick up the electromagnetic signal of the string vibration, and the speaker pronounces it after circuit processing. >>>More

16 answers2024-03-03

Ah, actually.

Both kneading strings can be used, but the effect varies depending on the guitar. >>>More