The mobile phone battery is aging, what is the phenomenon.

1.The phone battery loses power significantly faster.

When you find that the battery of your phone is obviously not as durable as before, such as charging it several times a day or the battery is obviously dead when listening to music, you should pay attention to whether the battery has aged.

2.**Abnormal fever in the middle.

The battery of most mobile phones is generally built into the upper part of the middle of the phone. If you are using a mobile phone, the middle of the mobile phone is obviously hot, and the temperature is high, which may also be a sign of battery aging.

3.The phone is obviously changing cards when it is running.

Because the battery is aging, the shutdown speed will be faster and the temperature of the phone will increase. All of these reasons will cause the frequency of the phone's processor to decrease, resulting in a decrease in performance, and finally the phone will run stuttering.

4.Charging failed.

Do you often find some strange places in the process of charging? For example, charging failure, slow charging, automatic restart, etc. It may be one of the manifestations of battery aging.

5.The battery swells.

Swollen batteries are very serious cases. If you find that the battery is bulging, it is recommended to go to a professional after-sales service agency for repair immediately.

The normal standby time of the mobile phone is about 1 day. The standby time of the phone is related to the battery capacity, personal usage habits, network quality, etc. For example, surfing the Internet, watching, playing games, etc., are relatively power-intensive. Here are a few ways to extend the standby time of your phone

1.Bluetooth, Wi-Fi, GPS, camera, browser, and other related applications, we recommend that you turn them off in time after using these functions.

2.Turn on your phone's power saving mode or super power saving mode.

3.Reduce backlight time.

4.Turn down the brightness of the display.

The standby time is getting shorter and the power consumption is getting faster and faster, and everyone in their mobile phones will encounter a situation where the battery is becoming more and more disabled. Some people disagree, thinking that charging more can solve the problem, and they always connect their mobile phones to the power source. In fact, the vast majority of dangerous accidents such as mobile phones** and battery leakage are caused by aging batteries.

With 360 Power Saver, while saving power to avoid long-term charging, you can also detect the health of the battery with one click to ensure the safety of your mobile phone. <>

Incidents of mobile phones** are often reported in the newspapers, and in fact, the real source of such accidents is the battery. Experts believe that in addition to its own quality defects, the more important reason is that the battery cell is overcharged for a long time, and the lithium battery may be instantaneously discharged to generate a large amount of current in special temperature, humidity and poor contact or environment, causing spontaneous combustion or **. The aging of the battery, after repeated charging, is almost equivalent to carrying a dangerous "grenade".

With 360 Power Saver, click on the green battery indicator bar to enter the mobile phone available time interface. In the interface, there is a clear data on the maximum availability of each function of the phone, and you can make your own plan for using the phone based on this information. In addition, click on the green battery icon to see the battery details of the phone, including whether the battery is healthy, battery temperature, battery voltage and many other information will be marked, and the battery safety situation is clearly grasped.

In general, the optimal temperature for battery use is between 0 and 35, and if the battery temperature is detected to be too high, it is important to pay attention to heat dissipation. In addition, when users find that their mobile phone battery begins to age and is not durable, they can use 360 Power Saver to optimize power saving, maximize the battery life of the mobile phone, and try to avoid repeated charging, so as to prevent the mobile phone battery from being damaged due to high temperature, unstable voltage, and even spontaneous combustion**.

If the battery life of the mobile phone has become significantly shorter, it is generally the battery aging.

If you see that the charging time is too short, and the use time is too short, you can think that the mobile phone battery is aging.

The charging time is very long, but the battery runs out after a while, or the charging time is very short, and the battery is full, and it is used quickly. It's time to change the battery.

We can judge the aging of the mobile phone from several aspects:

A normal use of the electric board, after being fully charged, except for the non-stop brushing of the small **, can generally be used for more than a day, here is to meet the office requirements of the day, such as**, the use of chat software.

There is also a look at the charging time, if a board only needs a short time to be charged to be full, and the power consumption is very fast when used, this proves that the aging is serious, and it will be accompanied by heat and heat.

When the battery life of the mobile phone becomes shorter or the memory effect is aging, many people will simply replace it. If you are a thrifty or discoverer, you will find that there are some ways to repair the battery of a mobile phone that can revive the aging battery in our hands.

Mobile phone battery repair method one

Wrap the hand-type slow selling machine battery that is about to be scrapped in newspaper, wrap it in two layers of plastic wrap outside, then put it in the refrigerator freezer, take it out after three days, remove the package and put it in a cool place to dry for two days, and then charge.

Professional explanation about this mobile phone battery repair method (** network): The use process of mobile phone battery is a charging and discharging process, during which the yin and yang charges inside the battery collide with each other. The reason why the battery will become less and less used is that at normal room temperature, the kinetic energy inside the electrons is relatively large, so the battery is in an active state, and the leakage is relatively frequent.

When the battery is placed in a low-temperature environment, the microstructure of the lithium film and the electrolyte on the surface of the lithium battery, as well as their interface, will change significantly, resulting in the temporary inactivity of the battery and the reduction of leakage current, so after charging again, the standby time of the mobile phone will increase.

Mobile phone battery repair method two

Using a clean eraser to gently wipe the metal contact surface of the phone battery in contact with the phone can effectively improve the use of the phone battery.

The principle is that after a long period of use, the metal surface of the mobile phone battery has a certain degree of oxidation, resulting in poor contact and shorter battery use time.

In my opinion, the second method of repairing the battery of a mobile phone is more suitable for the kind of mobile phone battery that is not a serious problem.

Mobile phone battery repair method three

Use a battery that is close to scrap to discharge it thoroughly and then recharge it to activate the battery. The specific method is: you can find two wires and connect a small bulb of volts, and then connect the two ends of the wire to the positive and negative poles of the battery, at this time the bulb will emit some faint light, and then charge after the bulb is completely unlit, so that the performance of the battery can be improved.

Note: The battery repair method of this mobile phone is not very effective, but it is still somewhat useful.

Among the above three mobile phone battery repair methods, I personally recommend the first method. Bu teased but then again, if you want the mobile phone battery to be in good condition, you still have to pay more attention to the maintenance of the mobile phone battery in ordinary use, so that the mobile phone battery can better serve us.

Change the battery, you don't have to believe those activation and the like, the battery also has a life. It can only be suggested that you pay attention to the use of lithium-ion batteries when you use them, and pay attention to three points:

1. How to charge a new battery.

In the use of lithium batteries, it should be noted that after a period of time, the battery will enter a dormant state, at which time the capacity is lower than the normal value, and the service time will be shortened. However, the lithium battery is easy to activate, as long as it goes through 3-5 normal charging and discharging cycles, the battery can be activated and the normal capacity can be restored. Due to the characteristics of the lithium battery itself, it is determined that it has almost no memory effect.

Therefore, the user's new lithium battery does not need special methods and equipment during the activation process. Not only in theory, but in my own practice, it is best to use the standard method of charging this "natural activation" from the beginning.

For the "activation" of lithium batteries, there are many sayings: the charging time must be more than 12 hours, and it must be repeated three times in order to activate the battery. This statement that "the first three charges should be charged for more than 12 hours" is obviously a continuation of nickel batteries (such as nickel-cadmium and nickel-metal hydride).

So this statement can be said to be misinformation from the beginning. There is a very big difference between the charging and discharging characteristics of lithium batteries and nickel batteries, and it can be very clear that all the serious formal technical materials I have consulted emphasize that overcharging and over-discharging can cause great harm to lithium batteries, especially liquid lithium-ion batteries. Therefore, it is best to charge according to the standard time and standard method, especially not to charge for more than 12 hours.

In addition, lithium batteries or chargers will automatically stop charging when the battery is fully charged, and there is no so-called "trickle" charging that lasts for more than 10 hours in nickel electric chargers. That is to say, if your lithium battery is fully charged, it will also be white charged when placed on the charger. And none of us can guarantee that the characteristics of the battery's charge and discharge protection circuit will never change and the quality is foolproof, so your battery will be on the verge of danger for a long time.

This is another reason why we oppose long charging.

In addition, on some machines, if the charger is not removed after charging for more than a certain period of time, the system will not only not stop charging, but will also start a discharge-charge cycle. Perhaps the manufacturer of this practice has its own purpose, but it is obviously not good for the life of the battery. At the same time, long charging takes a long time, often at night, and in the case of China's power grid, the voltage at night in many places is relatively high, and the fluctuation is large.

As mentioned earlier, lithium batteries are very delicate, and they are much less resistant to fluctuations than nickel electricity in terms of charging and discharging, so this brings additional dangers.

In addition, another aspect that cannot be ignored is that lithium batteries are also not suitable for over-discharge, and over-discharge is also very unfavorable to lithium batteries. This leads to the following question.

2. When should I start charging during normal use?

The aging of the mobile phone battery is not only the problem of reducing the power, the aging of the battery will bring about unstable power supply, which can not meet the resources required for the normal operation of the mobile phone system, and the system is constantly optimizing the allocation of power resources, the hardware can not run well, and the mobile phone is very stuck.

There will always be such a problem in the mobile phone battery: after using it for a period of time, the battery will not be durable, the power will decay, the battery will consume quickly, the charging times will be frequent, etc., in fact, this is the characteristic of the mobile phone battery that begins to age.

There are many reasons for the aging of mobile phone batteries, one is natural aging, after a long period of use, the battery is repeatedly charged and discharged, and the battery capacity will decrease. The other is the aging of the mobile phone battery caused by inappropriate behaviors in daily use, such as overcharging and discharging.

In the mobile phone battery test, the high-current shrapnel microneedle module can carry the current in the range of 1-50A, the voltage is constant, and it has a good connection function.

The life of lithium batteries is generally 2-3 years, and the actual capacity of the battery will decrease as the number of charging and discharging times of the equipment increases. If you are using a vivo mobile phone, the battery has been used for a long time, and you feel that it is aging, it is recommended to bring the device to the vivo customer service center for testing, and you can replace it with a new battery.

Some models can enter Settings - Battery - More Settings - Maximum Battery Capacity, you can check the current capacity of the battery, if the display is lower than 80%, please go to the vivo customer service center for testing.

Currently, the models that support viewing the actual capacity of the battery are:

vivo: S17E, X Fold2, S16, S16 Pro, Lushout X90, X90 Pro, X90 Pro+, X Fold+, X80, X80 Pro Snapdragon Edition, X80 Pro Dimensity Edition, X Fold, X Note, S15 Pro;

iQOO: iQOO Neo8, iQOO Neo8 Pro, iQOO Z7, iQOO Z7i, iQOO Neo7 Racing Edition, iQOO 11, iQOO 11 Pro, iQOO Neo7 SE, iQOO Neo7, iQOO 10, iQOO 10 Pro, iQOO Neo6, iQOO Fenglao Neo6 SE, iQOO 9, iQOO 9 Pro, iQOO Neo5S, iQOO 8, iqoo 8 pro、iqoo 7、iqoo neo5.

Customer service center address: Enter the vivo official website vivo**app--my--service outlets after-sales outlets--select provinces and cities to inquire about the address of the customer service center, it is recommended to call the customer service center in advance to confirm relevant matters and understand the working time, so as not to delay valuable time.

1. The fuselage is hot: After using the mobile phone for a period of time, the fuselage is often hot, indicating that the main board of the fuselage has leakage or short circuit, and it should be repaired as soon as possible.

2. Use it for more than one year and charge quickly: If your mobile phone battery has been used for more than a year, and the mobile phone charges quickly, then your mobile phone battery has begun to age.

3. The battery is bulging: After taking out the mobile phone battery, it is found that the battery itself is bulging and warping, which is not the aging of the mobile phone battery, but the quarrel in the safety question. If this is the case, the phone battery should be replaced as soon as possible.

4. Frequent restart: If the mobile phone restarts frequently, then it can also indicate that the mobile phone battery is somewhat old. If necessary, you can use more skewers to slip cherry blossoms, dip them in alcohol, and rub them more often, so that the electrocution shop can be better.

In addition, in the settings of the mobile phone, we can generally see the battery-related data, which records in detail the information about the use of the battery.