The green light of the Huawei mobile phone has been not flashing, and it can t be turned on

Hello dear, it is recommended that you force restart to try it when you use force restart. If it cannot be turned on normally after using it for a period of time: This may be an automatic shutdown due to low battery power, please connect the charger to charge it for a period of time and turn it on.

Too many boot auto-start items will also lead to slow boot up, please prohibit apps that do not need to be booted up: enter the "Settings" interface, click "boot auto-start items", and clear the apps you want to prohibit. Huawei will release the latest software version on the official website, please enter the official website of Huawei**Address query according to model**; Or update the mobile phone software version through ** upgrade to get a better experience.

If the problem persists, it is recommended that you bring the purchase invoice to the service branch for maintenance.

If your phone flashes red on a black screen when you turn it on, you can use the following methods to troubleshoot:

1) It may be that the battery has been depleted, it is recommended that you use the standard charger to charge continuously for more than 30 minutes before trying to turn it on.

2) It is recommended that you press and hold the power button for more than 15 seconds to try to force restart your phone.

Repair spare parts** inquiry.

Make an appointment for service. Boarding service.

That is the phone battery is low, it is recommended to charge it for 15 to 30 minutes before turning it on, if it doesn't work. It's time to replace the battery.

1. It may be that there is a problem with the mobile phone software, you can flash the mobile phone, and the flashing method is as follows: 1. Long press and hold the volume up button and the power button on the mobile phone at the same time, and press and hold the volume up button and the power button on the mobile phone at the same time, and we release the power button when the mobile phone is displayed2. Enter the factory reset page, enter the EMUI management interface, and click the option to restore factory settings. 3. After the factory reset is entered, the system will remind you again, select the factory reset below and press the power button.

2. If it is not useful, the system may be damaged and need to be dealt with at the maintenance point.

Hope it helps.

That's when the battery is broken.

Question: Plug in the charger and the red light will turn on, and now it has been charged for a day.

Do you need to replace the battery?

Need a pro. The battery does not need to be aged for a long time, and it cannot be charged.

It should have upgraded Huawei's HarmonyOS system. The same phenomenon has become a brick, and I don't know if there is any salvation.

If it keeps flashing, it means that there is no power.

You can take it to a maintenance person for repair.

When the phone is turned on, the screen is black, unresponsive, or flashing red light, you can operate it by the following methods:

1) It is recommended that you press and hold the power button for more than 15 seconds to try to force restart your phone.

Repair spare parts** inquiry.

Make an appointment for service. Boarding service.

The flashing red light can't turn on, it's out of power. Plug in the charger and wait for ten seconds before it turns on. If it still can't be turned on, it may not be charged, check whether the data cable, charger, and connector are in good condition.

Consult after-sales customer service first to see what the problem is, or restore the factory settings to try, but not go to the after-sales maintenance to check the quality of the hardware.

The red light flashes when the battery is empty. In other words, it was not charged before.

Huawei mobile phone lights up red light can't turn on Hello dear, determine whether the phone has been rooted, if not, you can try to press and hold the power button, if there is no response, to confirm whether the phone is too low, it is recommended to charge for 30 minutes and then try to turn on. If you still can't turn on after charging, you should try to connect your phone to the computer and press and hold the volume up button + power button to see if you can enter erecovery mode. If you can enter the eRecovery mode, you should connect to the standby WLAN network according to the prompts on the interface, **The latest balance core version is upgraded.

If the phone can be turned on normally after the upgrade, the phone may be temporarily unstable, and if the problem persists after a period of observation, it is recommended to contact a Huawei authorized repair network for testing. If the above methods still do not solve the problem, we recommend that you go to the local Huawei authorized after-sales service center for testing. Hope it helps.

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood!

Hello dear! The Huawei phone can't turn on the red light may be due to the following reasons:1

Low battery: If your phone's battery level is too low, it may cause your phone to not turn on properly. At this point, you can connect your phone to the charger to charge it and wait a while before trying to turn it on.

2.System failure: If your phone's system is malfunctioning, it may cause your phone to not turn on properly.

At this point, you can try to enter your phone's recovery mode for system repair or factory reset. 3.Hardware failure:

If your phone's hardware fails, such as a damaged battery or motherboard, it may prevent your phone from turning on properly. At this time, you need to contact the after-sales customer service of your Huawei phone to repair or replace the parts. In short, if your Huawei phone can't turn on with a red light, it is recommended that you try to charge the phone first, if it still can't turn on, you can try to enter recovery mode to fix it, if the problem still exists, it is recommended that you contact the after-sales customer service of your Huawei phone for repair.

At this time, charging, a red light will flash in a short period of time, and it will not be able to turn on, which is a normal phenomenon, at this time, you need to continue to wait for charging for more than ten minutes, and you will see that there is a display of charging on the screen, under normal circumstances, it is more difficult to turn on the power below 5%, as long as you rush to the power that can be turned on, the mobile phone will automatically turn on.

Rest assured, most of this situation is not that the phone is broken, if you wait for more than half an hour and still can't turn on normally, you need to check whether it is charged, if it can't be charged normally, you can gradually check: whether there is a little "plug-in board at home" "whether the mobile phone charging cable is plugged in well" whether the charger is broken.

If the device still can't be turned on after the check, you can bring the proof of purchase (if it is under warranty) to Huawei after-sales service for testing.

The phone lights up red and can't be turned on, this should be the problem that the battery of the Huawei mobile phone has no power, and this needs to be charged in time to turn on and use it normally.

The emergency backup function is to allow the phone to have the opportunity to back up data when it is not turned on; You can choose the "Data Backup" option in the emergency backup interface, currently support NM card OTG and other devices as storage media for data backup, according to the backup is completed, select the "Factory Reset" option, (it will erase all data in the phone, if not backed up, the data in the phone will be lost) to try to restore the phone.

Hello, glad to ask this, that's generally the case. The indicator flashes red to indicate that the battery is very low or cannot be turned on normally, it is recommended to charge the phone for a period of time before turning it on, if it still can't be turned on, you can press and hold the power button for more than 10 seconds to force restart the phone. If the problem cannot be solved, it is recommended to bring the purchase invoice to Huawei for after-sales inspection, and if the data cannot be backed up, you can consult for maintenance.

The above is the maintenance method, you can try it. It is usually caused by low power. Remember Zanha!