The phone has entered the recovery mode, and the flashing wizard has not responded, how to solve it?

There is a problem with the driver.

Here's how to fix it:

2. After the installation is successful, disconnect the mobile phone from the computer, then start the flashing wizard, then connect the mobile phone and the computer, wait for the connection to be successful, click on the one-click flash, and follow the prompts step by step.

Flashing wizard is a one-click flashing software for Android mobile phones running on the PC side launched by Shenzhen Bottle Technology, which can help users quickly complete the flashing upgrade in a short process. Flash Genie is a work launched by the OURS team.

It supports more than 1,000 Android phones and more than 9,000 models of Android devices with one click to root.

Enter the 2 options with two wipe words.,Click on it.,That's the option to restore the factory and delete the cache.,You click it to see if it can boot up (if it works, it means that your problem is the problem of the system itself)

If it doesn't work,It means it's a problem with your mobile phone.,It's possible that you deleted the wrong thing after rooting.,This is generally solved by flashing.。。 **A card swipe package of your phone model, put it in your phone memory card, enter recovery mode, click the option to select the zip package installation, select the card swipe package you just placed (you can change a name you can recognize before putting it in, remember that it cannot be changed to Chinese, it can only be displayed in English). Once installed, it will automatically restart, OK

If it doesn't work, you can brush it like this: your phone model + a space + firmware.

There are instructions in it, so I won't explain it.

Pure hand-to-hand, so soft...

Here's an example:

1. Open the flashing wizard and wait for the software to automatically connect to the phone to install the driver.

<>3. Select the recovery file that needs to be flashed.

4. Locate the file.

5. Wait for the recovery operation process to be executed.

6. At this time, use the flashing wizard to enter the recovery mode, and the SD card of the mobile phone is successfully flashed.

After flashing, the phone does not turn on, it may enter the recovery interface: what does recovery mode mean.

Recovery is a mode provided by the Android mobile phone version that can modify the internal data or system of the phone, a bit like DOS under the Windows operating system. After the phone enters the recovery, you can restore the phone to factory settings, upgrade the phone's system, flash the phone, and so on.

The interface is generally in English, such as the figure below, and the recovery interface of some mobile phones may also be in Chinese (such as Chinese recovery that has been brushed by a third party). So what to do at this time?

First, you can try restarting.

Use the volume up and down keys, move the cursor to the reboot system now option, and press the power button once, the phone will restart, and then see if the problem can be solved;

Secondly, you can try to force restart, first press and hold the power button to turn off, wait for 30 seconds and then press and hold the power button to turn it on.

Hello !

According to your description, after the phone is successfully flashed with the flashing wizard, it will enter the recovery mode first every time it is turned on.

version, and then you can enter the system.

We recommend that you try it by following these steps:

When the device is fully charged, after backing up data, press and hold the [Power Button] and [Volume +] buttons for 10 seconds with the device off (off).

After entering recovery mode, move the cursor with [Volume+], Volume-] (see figure below).

Operate 2-wipes again

Select Wipe Data Factory Reset > yes, home] to confirm.

Select wipe cache partition > yes , home] to confirm.

Select reboot system now > yes , home] to confirm.

After doing so, restart and you're done.

If the problem persists after 2-wipes, it is recommended to press and hold the [Power Button] and [Volume-] buttons for 10 seconds to enter fastboot mode

Connect to your PC and use Flash Tool to flash the official ROM to repair the system.

Hope this helps you!!

Hello, the team's answers to your questions are as follows First of all, I don't really agree with Xiaobai using this function, because a lot of recovery is split card swiping with line swiping, card brushing can not be used for line brushing, line brushing can not be used for card brushing, if you are still a white, and you are not familiar with recovery, it is recommended to automatically help you flash into recovery through the system backup function of the flashing wizard, please see my article "How to use the flashing wizard for system backup". Moreover,This function is not very perfect in the flashing wizard tool,First,Brush the shirt and the recovery must be flashed into the phone with the fastboot command through fastboot mode,And I just tried it,Click on the flash recovery function when you boot up,As shown in the figure below,Select the recovery file that has been prepared When using this function,Flash wizard has already prompted that the flashing wizard is flashing,Backup, During the restoration process, it will automatically flash recovery for you, which is a very good point. However, when I choose to OK, it is less than ten seconds, and it shows that flashing recovery failed, and the phone has been turned on, at this point, the flashing wizard is not good enough, because this function should automatically restart to fastboot mode, take a look at the picture below If you have experienced the same situation as me, and you don't know where the problem is**, now I will teach you the right way.

Before flashing into the recovery you are looking for, click "Enter fastboot" in the utility"Mode function, as shown in the figure of a few seconds later, the phone enters fastboot mode, at this time, the flash wizard will be displayed as good, if the flash wizard has recognized that your phone is now talking about greater than fastboot mode, you can click on the utility in the "flash recovery" function, as shown in the figure below Now you can see, compared with the previous **, you will find that there is one more option, that is, the one in the figure" After flashing into recovery and start into recovery mode", yes, this is the correct operation of really flashing recovery, you can check the options, it is recommended to check it, and it will restart to recovery mode after brushing. This time it finally worked, but the success of the flashing wizard does not mean that you can enter or recover mode. Why?,I said it,Recovery has a card brush class and a line brush class,These two types of formats are the same,So the flash wizard can be swiped in,But once the category is used wrong,Even if you swipe in, you can't use it,The general situation is that you can't get into recovery when stuck on the first screen,At this time,You don't have to worry,You can turn it back on completely,The phone has no impact (if it's broken), it's counted separately).

You can find the recovery of the line brush to re-flash until you can enter. If you have any questions, you can continue to ask me.