Entered the http 192 168 0 1 interface how to set it,

You're talking about the router settings, so let's do it as follows: Enter.

What I have here is.

After that, you can see a prompt box that asks you for your real account name and password Fill in admin for both account name and password, and then enter the settings of the router, click "Setup Wizard" and then "Next" on this interface, and then select "ADSL Virtual Dialing (PPPOE)" and click Next, fill in "Internet access" and "Internet password".

Set by the instruction manual of the route.

Different routes have different settings methods, basically just enter the account and password of the network cable --- connect.

Don't know what router you're using.

I'll just take the example of what we use in our dormitory, and it's basically the same.

After the login interface appears, the user name is admin The password is also admin, which is the default name of the general router, if not, only refer to the manual.

Then there will be a setup wizard on the left and the like, the next step is to choose your Internet access method, ordinary broadband is the first ADSL virtual dialing (this step is very important, the general router defaults to the second dynamic network, you must change it to ADSL virtual dialing, it is useless to set it up 10,000 times), and then the next step, fill in the username and password of your broadband, and then the next step is completed.

If there are no other problems, the connection will be displayed in the system status options on the left, and you can also see the communication data at that time.

<> "Here are general step-by-step instructions:1First, enter and press enter in the browser to enter the management page of the router. 2.

If you are entering this page for the first time, you will need to enter the username and password you use to log in to your router. By default, the username is admin and the password is admin or blank, please find your router's user manual and check the login information; 3.Once you have successfully logged in, the router's configuration page will be displayed.

The page may vary depending on the router brand. You can browse and see the available setting options; 4.Modify as needed, such as changing the wifi name, wifi password, network type, etc.; 5.

Once you're done configuring, remember to click the Save or Apply Changes button to make sure the changes you've made are saved in your router. Please note that the settings of your router may vary depending on the brand and model, and these steps are for reference only. If you need more specific help, please refer to the router user manual or consult the relevant technical support personnel.

1. Open the browser and find the address bar at the top of the browser.

2. Then type " in the address bar and press enter.

3. After that, the interface to log in to the router appears.

4. Enter the username and password on the back of the router in this interface, and click the login button to enter the settings interface.

Step-by-step method of the router setup interface:

Enter the router, you need to set it up before using it, here is to share the method and steps with you. Once the settings are successful, you can log in. Please see below for detailed steps, please follow the steps to set up the relevant details carefully.

If something goes wrong, you can also check the manuals of your router.

Router settings.

Step 1: The computer is not directly connected to the original network cable, but through another network cable.

Step 4: Select "Wireless Parameters" - Basic Settings to set as follows.

Step 5: Setting the wireless password, remember to fill in the password, and remember the password, and you can access the Internet wirelessly in the future.

Login method 1: If the user is through the IE browser to enter**login to the router,Then it may be related to whether IE is set**, if IE is set**, the above failures will occur, all first of all, we cancel**settings. Click on "Tools - Internet Options - Connections - LAN Settings" as shown in the image

Method 2: After canceling **, check whether the computer is connected to the LA interface (generally there are 4 interfaces, one of the 4 interfaces), and then check whether the router is working normally and whether the indicator light is on.

Method 3: Of course, some users access the Internet through modem dial-up. If this is the case, remove the dial-up connection from the broadband first.

Select "Never make a dial-up connection" to follow the specific steps: Click "Tools - Internet Options" on the toolbar of Internet Explorer, switch to the "Connection" button, and then you can operate as shown in the following figure

Method 4: Check whether the IP address set by the user's local address belongs to the same network segment as the IP address of the router LAN port. If you don't know how to set it, set it to "Automatically acquire IP addresses".

Method 5: After passing the above operations, go to the router settings**. Now try to enter on the address bar of Internet Explorer to enter the settings screen of the router. If you still can't log in, you can reset the router and restore the initial state.

Method 6: Finally, if you change the management port of the router, you should enter http: LAN port IP: port number when logging in.

The default password of the routing account is admin admin

Thank you for the trouble to adopt!