White HM3300, Samsung Bluetooth headset

When the Samsung phone is connected to the Bluetooth headset, it is operated on the phone

1. Settings--Bluetooth--Slide the slider to green, click Bluetooth, enter the settings, check whether my device is ticked, after ticking, it will display "Visible to all nearby Bluetooth devices", and then scan.

2. At this time, the Bluetooth headset needs to be in a connectable state (the Bluetooth headset connection method can refer to the manual) to see if it can be connected. Bluetooth headsets and mobile phones also have the possibility of compatibility, it is recommended to try it first when purchasing or you can also contact the service center engineer to help connect.

HM1700 Pairing and Connection Operation: Turn on the side and there is a slide power button on the upper left foot, you slide up to turn on the power on and wait for 3-5 seconds, and the Bluetooth headset prompt light on the right side will always be on. You can use your mobile phone to directly receive and request for successful pairing, and some mobile phones require a PIN code

Not well, the main Bluetooth headset brands are Jabra, Plantronics Voyager, Nokia, Sony Ericsson SE. and other brands. Among them, Jabra and Plantronics Voyager Bluetooth stereo headsets are the best, which belong to high-end Bluetooth headset brands, and Jabra Bluetooth stereo headsets are well-known brands in the global market for personal communication.

In fact, the easiest way to buy Bluetooth headsets is to look at the sales ranking first, and then the most important thing is to look at the evaluation of netizens after purchase, and there is a chance to win the jackpot, that is, no matter how good the quality of the brand, there is also a chance of bad products,!

Here's how to connect Samsung HM3300 Bluetooth headset to two phones at the same time:

3.Press and hold the smart on/off key of the earbuds until the indicator turns off to turn off the earbuds, and turn off the Bluetooth of the phone1.

6.Turn on the Bluetooth function of mobile phone 1, find the earphone model, and click the link. You can complete the one-to-two.

Precautions. One-in-two is only supported by some Bluetooth headsets. Please make sure if the headphones are supported before use. The test was with BlueSong H11S Bluetooth headphones.

Hello! ixChange Headset Cable Retractable Bluetooth Headset Saves You Worries:

Kiss! You can connect both phones at the same time by following the steps below.

Step 1: Connect your Bluetooth headphones with your Apple 4 first.

Step 2: Turn off both your phone and your Bluetooth headphones.

Step 3: Press and hold the multi-function button to put the Bluetooth headset into pairing modeStep 4: Use your Apple 5 to search for and connect the Bluetooth headset, and then turn on your Apple 4 after connection, hoping that the answer will help you If you encounter any problems, ask again.

Here's how to pair:

2.The phone turns on detectability, that is, it can detect nearby Bluetooth signals. Then search for a nearby Bluetooth signal, and after searching for a Bluetooth headset (the model of the Bluetooth headset is generally displayed), click to connect.

If you are prompted to enter a password, the default is "0000", and the password is entered to confirm that the connection is successful.

3.The Bluetooth headset has been paired before, and if you want to switch to other mobile devices, you need to pair it manually. After finding the multi-function button, press and hold the multi-function button for about 8 seconds when the earphone is powered off, and then the red and green indicators flash alternately, indicating that the Bluetooth headset has entered the bending hand pairing state, and then the phone searches for the Bluetooth signal, and then connects it.

4.If the Bluetooth earphone and the mobile device are successfully paired, when the Bluetooth headset is turned on, the mobile device will turn on Bluetooth at the same time, and the blue display light of the Bluetooth headset will flash slowly, indicating that the Bluetooth headset and the mobile device are automatically paired and connected successfully. When the mobile phone comes, press the multi-function button of the Bluetooth headset to answer**.

Generally, switching songs is controlled by the volume and size keys of Bluetooth headphones.

Double-click the + key or the - key to adjust the up and down

The mobile phone should first turn on Bluetooth and be in the discovered state, press and hold the Bluetooth headset switch until the Bluetooth of the mobile phone searches for the earphone and displays the headset model, and then tap the headset model displayed in the mobile phone to connect (sometimes you also need to enter the PIN code, the default is generally "1234.")"), the display of "connected" means that the connection is successful, at this time, Fanghe Zhen can release the earphone on/off key. The following takes the Conexin Bluetooth headset as an example to talk about the specific connection steps with the mobile phone for reference:

1. When the earbuds are off, press and hold the multi-function button for about 5 seconds, and the voice prompts will be "powered on" and "pairing", and the red and blue indicators will flash rapidly and alternately;

3. Select the Bluetooth model name (such as "Y4") from the Bluetooth device list of your phone or other devices and connect (if asked to enter a password, enter "0000"). After the connection is successful, the voice prompt "Bluetooth is connected". You can use calls and listen to audio on your phone or other devices.

There are also bluetooth headsets that call the tremor to connect the phone with the following methods:

1. In the state of the earbuds powered off, press and hold the NFC function (about 10 seconds), the blue light will flash first, don't be excited at this time, continue to press and hold until the earphone indicator appears red and blue flashing alternately, and enter the state of being searched. (Remember that the earbuds must be in the searched state before they can be searched by other Bluetooth devices.) ）

3. Click to connect, after the connection is successful, the earphone indicator will be displayed as a blue light flashing at intervals.