How can I use one host to drag multiple monitors, each monitor has a different display content,

It's easy to achieve.

There are two cases:

1. The situation of the notebook. Most laptops have at least a VGA port, and some have DVI or HDMI ports that can be used to connect a second monitor. After connecting, press fn+f8 (it may also be another function key, depending on the notebook model), you can switch between a certain display, or both displays.

If you need two monitors to display different content, you need to right-click on the desktop - Properties - Settings, select the second monitor, and then check "Extend Windows desktop to this monitor", and you're good to go.

2. The situation of desktops is similar to that of laptops. The graphics card needs to have two or more output ports (VGA, DVI, HDMI) to connect multiple displays. The setting method for displaying different contents separately is the same as that of a notebook.

There is no special requirement for the motherboard and the monitor to display the same content on both monitors at the same time, as long as both monitors are properly connected to the console, you can start setting up and using.

For Windows 10, the following describes how to set the settings.

1. Click the start menu in the lower left corner of the desktop.

2. Click on the Settings option.

3. Click on the system option in the upper left corner.

4. Click on the settings option below Multiple Monitors.

5. Click on the Copy these display options.

6. Click the Keep Modify option to complete the operation.

To meet the requirements of one host with two monitors to display different content, you need to follow the steps below:

2) Turn on the host, enter the system and press the shortcut key win+p.

3) Select the extended mode (extended mode), as shown below:

4) At this point, you can display different content on both displays.

Methods and steps for connecting one computer to two monitors:

The computer host adds a second monitor (including LCD TV) to achieve dual-screen display, as long as the computer host and the second monitor have a matching **signal input and output interface, it can be connected through the corresponding ** data cable. Of course, the computer host (motherboard) should also have dual display interfaces and the graphics card supports dual screen output.

Place your mouse on the desktop, right-click — Screen Resolution, and you'll see the screen setup options, <>

2.If you have two monitors installed and they don't show up, you can click Detect to detect them. Then, in the multi-monitor display, you'll see options to "Duplicate these displays" and "Expand these displays."

3.Select this option and you'll see the exact same Windows window on both displays, which is perfect for displaying the same content to multiple people.

4.Compared to the "copy mode", the extended mode is more suitable for our average users, which can virtualize two displays into a complete display, thus expanding the display space to display continuous and different content under the two displays, and at the same time we can define the horizontal or vertical addition. This mode is flexible and suitable for gamers or users who need to run a large number of programs at the same time.

5.If you're using an AMD or NVIDIA graphics card, you can set it up in the graphics card control panel according to the graphics card instructions, and of course the easiest way to do it is in Windows 7's own control panel.

Data Expansion: <>

A monitor is an IO device that belongs to a computer, i.e., an input and output device. It can be divided into CRT, LCD, and many others. It is a display tool that displays a certain electronic file on the screen through a specific transmission device and then reflects it to the human eye.

Monitors are also commonly referred to as monitors. A monitor is an IO device that belongs to a computer, i.e., an input and output device. It can be divided into CRT, LCD, PDP, OLED, and many others.

It is a display tool that displays a certain electronic file on the screen through a specific transmission device and then reflects it to the human eye.

To meet the requirements of one host with two monitors to display different content, you need to follow the steps below:

2) Turn on the host, press the shortcut key win+p after entering the system, 3) select the extended mode (extended mode), as shown below.

4) At this point, you can display different content on both displays.

It depends on whether your graphics card supports multiple screens.

There's a terminal splitter.,I've installed this before.,I forgot the specific name.,You go to the computer city and ask them all about.,After that's installed.,A computer can be used as two machines.。

If the monitor has two inputs, connect directly to the two hosts and select the inputs manually.

If you don't have one, buy two KVMs and connect them separately.

The premise is that the host is a dual-headed output.

A graphics card with multiple display interfaces is required, and the software also needs to install an official driver.

The computer is connected to two monitors, there is no threshold on the current computer hardware, there is only one condition, that is, the output interface of the computer graphics card (or nuclear display motherboard) has two display interfaces, and the two external displays are connected with the surface and the output interface, in the display settings, there are two display setting modes, whether to display the exact same picture, or display half of each.

This should be debated and fronted to see if there are more than two monitors on your host interface,If not,It can't be realized,You need to buy an independent graphics card with a dual output interface,If so,Directly connect the two monitors to the computer,Turn on the system and enter the system,Select the resolution to choose the dual monitor display Change the resolution。

Three monitors on a single machine, right?

First of all, the graphics card of the host should have dual interfaces, that is, DVI and VGA, which are generally available on the independent graphics card.

You also need two screens with the same sound, right, these two monitors are connected to a splitter, the computer is sold, thirty or fifty yuan, two monitors are connected to the splitter, and then a wire comes out of the splitter and connects to the VGA, then the picture of these two is the same.

The other one is directly connected to the DVI interface as a split screen.

The specific settings are set in the display options of the computer, which is very simple.

It doesn't have any impact, it's just that the desktop space is doubled, so it will be more convenient to do a lot of work, and the computer in my study is such a configuration.

Yes, but not both.

And the display must have the function of switching signal channels,For example, computer 1 is HDMI signal interface,Computer 2 is DVI interface so you can,If the two shields are staring at a computer are VGA output interfaces,Or the display only has VGA one input port,Then this connection is not established。

Another way is to use a picture splitter, but there is no need to do this, because the cost of doing so will exceed the ** of buying another monitor, you need to have an image processor, a screen splitter.

There is also a kind of monitor, which he has a variety of access signals. At the same time, he can display two screens, and the remote control can only operate it. But only two! ~

Although there are multiple connection methods for one machine with multiple displays, as far as your simple description is concerned, yours should be displayed by multiple displays through a graphics card (or adapter card) on a host.

Since you only have one console, and your console has software installed, other monitors can of course display it.