What should I pay attention to when using gel gel?

Gel Gel Precautions:

1.Do not mix gel with other adhesive materials.

2.The opened package is used up on the same day, and the advanced goods are used first and recycled.

3.Do not heat at ultra-high temperature and for a long time to decompose the animal glue.

4.Replenish heating water or jelly to adjust the concentration and viscosity to meet the operating requirements.

5.Ambient temperature and humidity, the type and moisture content of the paper board and the cleanliness of the paper will affect the bonding effect.

6.The moisture content of gray board paper and finished products is less than 13%, and special attention should be paid to mildew and blistering in the high temperature and humid rainy season.

7.The bonding of the semi-finished board before pasting should be firm, and the residence time and operation speed of the face paper after gluing, as well as the pasting pressure and operating procedures will affect the bonding effect.

8.The moisture content of the pasted product and the storage and transportation environment (temperature and humidity) will affect the effect of the product.

9.Art paper, specialty paper, plastic paper and paper weighing less than 128 grams must be carefully crafted.

In general, there are four aspects that should be paid attention to when using Huakang gel gel.

1. Do not mix with other colloids to avoid gel reaction.

2. Please use it on the same day after opening the inner package, and use the advanced goods first and recycle.

3. Do not heat at ultra-high temperature and for a long time (such as the glue paste exceeds 75 for a long time), and the colloid will decompose or coke.

4. Replenish heating water or jelly at any time, and adjust the concentration and viscosity to suit the operation.

Keep away from open flames and be careful not to get into your eyes, nose and mouth.

You can use it at the same time, but remember. Dry glue followed by gel water. There is absolutely no use of gel water first and then dry glue.

Because the moisture content of dry glue is less. Helpful for body shaping...It can create a sense of air.

Whereas, gel water has a high moisture content.

After using dry glue to initially fix the shape of the hair, then apply gel water to enhance the styling effect. It is not easy to deform. If you use a lot of dry glue, you can also get a perfect set, but the gel water** is cheap, and you can save the amount of dry glue by using a small amount of dry glue in the gel water.

If you're styling, start by styling with gel water. After that, using dry glue will have no effect. It's just taking off your pants and farting.

It is best not to use gel water and dry glue at the same time.

Dry glue is an aerosol, which will be sprayed out when pressed, and the styling spray is a water agent, which needs to be squeezed hard to come out, the two functions are similar, but the effect is somewhat subtle, and they are the favorites of professional hairstylists.

The gel water is softer and makes the hair look more natural and better after being done, but the styling time may not last as long as the hairspray, but it still depends on the quality of the gel water itself.

1. Before using this product for the first time, the pre-dissolving pot and glue tank should be cleaned, and the gel glue should be put into the pre-dissolution pot of mechanical equipment, diluted with water, and the amount of water added should be 5%-10% of the weight of the glue, and should not exceed 15%. It is melted at a temperature of 70-80, and after all the rubber blocks are dissolved into liquid, they are put into the glue box, and stirred evenly before they can be used on the machine.

2. Use temperature: the bottom of the room temperature in winter is 10 o'clock, the temperature generally needs to be set at 80 -95, and when the room temperature is higher than 20 in summer, the temperature generally needs to be set at 70 -75 (the temperature value of different equipment will be different, and the room temperature is particularly low or particularly high in the environment, the difference between the temperature setting of the hot melt equipment and the actual temperature of the glue may also change, based on specific operation practice).

3. The gel gel can be used repeatedly, and the colloid temperature will re-condense into a solid after the shutdown, and it only needs to be reheated and melted before the next use. However, after the colloid is repeatedly heated and cooled many times, the viscosity of the colloid will be affected, so it is recommended to put an appropriate amount of glue block according to the actual processing amount. When the machine stops after work, please clean the rubber roller, hose and glue pump immediately to avoid damaging the rubber roller and clogging the hose and glue pump after the glue solidifies.

At present, the gels on the market are roughly divided into the following types according to different production processes and equipment:

Gel glue for high-speed machines: It is used for automatic high-speed box making or book case making, and the maximum speed can keep up with 60-80 machines per minute.

Gel glue for medium-speed machines: It is used for semi-mechanized box making or book case making, and the drying time is about 20 seconds.

Gel glue for low-speed machine: It is used for manual or semi-automatic machine glue, this kind of glue dries slowly, and after the tissue paper is glued, the glue is still sticky and does not solidify in 120 seconds. This leaves enough time for the craft to be done by hand.

Moreover, the products produced with gel glue are not deformed, not easy to mold and blister, and can enhance the stiffness of paper products.

Gel glue is used in these machines, it is widely used, and there are also in the packaging industry, such as glue for gift boxes, glue for mobile phone boxes, and glue for wine boxes.

Gel glue has the characteristics of fragrant smell, strong viscosity, good fluidity, strong foldability, clean use effect, dry time book, and gel glue due to low water content, it can solve the deformation, brittleness, blistering and other phenomena that are easy to occur after the production of Shuzhou disturbing late shells, and will not corrode the machine. The gel coating is only half of the general glue. The gel glue produced by Huakang Glue Factory is clean and environmentally friendly!

Gel glue, used for gift boxes, paper boxes, wine boxes, cosmetics boxes, tea boxes, hardcover bookcases, photo albums, philatelic albums, folders, dictionaries and other cover production. Production of high-end gift boxes for the production of paste. Because the main ingredient of gel gum is animal protein, it does not contain benzene formaldehyde solvents, so it is non-toxic and truly environmentally friendly.

There is no contamination of food and packaged items. The products produced by jelly glue are not deformed, not easy to mold and blister, and can enhance the stiffness of paper products. In addition to strong viscosity, jelly glue also has moderate softness, so that hardcover books, recipes, dictionaries and dictionaries are often broken parts.