How to open the purple clay pot, the easiest way to open the pot

Boiling the pot is a kind of etiquette given by people who love purple clay pots.

Don't care too much about opening the pot, opening the pot is to start using the pot, just the beginning, besides, there are many ways to open the pot, and it is not difficult, you have to know the reason for the pot, you can proceed to the next step according to your own situation, whether to open the pot, to put it bluntly, is to clean the pot, you buy a cup, but also wash it first, a truth.

Because, the new purple clay pot comes out of the kiln, and there will be some materials (such as: aluminum powder) that are placed in the purple clay pot indoors

As well as small particles of purple sand and so on, the easiest way:

1: Rinse it with clean water first, flush it on the faucet inside and out, pour hot water (rest assured, the purple sand will not burst because of the large temperature difference), cover the lid, observe the body of the pot from wet to dry, to hot water, after injecting hot water, repeat several times, and feel that it is almost the same.

2: Since you choose Pu'er tea, then, clean the pot and put it in the pot (the water can overflow the pot.) Add a large amount of Pu'er tea (30-50g), boil the pot, boil, turn off the heat after simmering for 1 hour, wait until it cools naturally, repeat it 2 times, wait for the natural cooling, take out the pot, wipe the body of the pot, and you can.

There are many ways to consult the purple clay pot forum

The purple clay pot is the easiest to open correctly.

Originally, the opening of the purple sand pot is very simple, I think those sugarcane and tofu are not needed, I learned on Weixing Zisha**, the article said that there are so many pot makers in Yixing, they are all cleaned with water, and then they can be used with hot water.

1. Wipe the purple clay pot carefully and put the purple clay pot into a pot of cold water and boil for 5 to 10 minutes.

2. Cool the pot naturally, and press the old tofu tightly and fill it into the pot.

3. Cool the pot again and cook until the kitchen is filled with the aroma of tofu for 5 to 10 minutes.

4. After the jujube pot is cooled, then put the pot under cold water, put about 200 grams of sugar and boil until it boils for five to ten minutes.

5. Finally, boil the tea leaves and purple clay pot in a pot under cold water for ten minutes. The banquet was demolished.

1. The clear water method is used to open the purple clay pot.

Due to the heavy fire of the fetal bones of the new pot, the microporous structure between the purple sand is loose, and the pot is very brittle, which is easily affected by thermal expansion and cold contraction. Therefore, when buying a new pot, you must wash the inside and outside of the pot, put it in a clean pot, remove the lid of the pot, spread the body of the pot with pure water, and boil for half an hour.

The clear water method is the most concise and convenient way to open the purple clay pot. The purple clay pot will be like taking a hot bath, refreshed, waiting for you to make tea.

2. Tofu and sugarcane to the purple clay pot to boil.

1) Warm up: Rinse the purple clay pot you just bought back with boiling water inside and outside to remove the dust on the surface, then put the teapot into a pot without oil stains, add 3 times the height of the water and boil for 2 hours, so that the earthy smell and fire of the teapot will be removed.

2) Reduce the heat: Put the tofu in the teapot and cook for 1 hour. The gypsum contained in tofu has the effect of reducing fire and decomposing the residue of the teapot.

3) Moisturize: Cut the sugarcane you bought, put it in a pot and cook for another 1 hour. The natural sugar content of sugar cane can make the teapot moisturize like never before.

4) Rebirth: Finally, choose your favorite tea leaves and put them in a teapot to cook for 1 hour. In this way, the teapot is no longer a "lifeless" dead thing, after being reborn, it absorbs the essence of tea, and the first brew of tea has been able to make the tea people's teeth and cheeks fragrant.

3. Boiling tea to the purple clay pot.

Put a small towel at the bottom of a clean and odorless pot, put a new purple clay pot on the towel, let it add twice as much water as the pot, and cook together for 2 hours. Then, whatever kind of tea you want to brew in this pot, put whatever tea in it and cook it for 1 hour. Finally, take out the purple clay pot and put a handful of the same dried tea leaves into the pot, so that the pot can absorb more of the flavor of the tea leaves.

The method of boiling tea is the most suitable for kettle lovers who are in acute, and if they don't have time to raise it slowly, let it eat at one time.

<> clean the purple clay pot with clean water, then pour the inside and outside of the purple clay pot with boiling water, and then repeat it with warm water several times. Then put the purple clay pot into the pot, add water and tea leaves, and boil it 2 times, wait for the water to cool naturally, take out the purple clay pot, wipe the body of the pot and open the pot to complete.

The purple clay pot is like the previous Biyan He opened the pot1. Wash the purple clay pot with clean water to wash away the remaining pottery chips and dirt when the purple clay pot is formed and fired.

2. Then use boiling water to pour both inside and outside of the purple clay pot.

3. Repeat the drenching with warm water from the inside and outside several times, the purpose of which is to open the pores of the purple clay pot.

4. Put the purple clay pot into the pot and add water to overflow the pot, and then put in the tea leaves that you usually use.

5. **Boiling pot, after boiling, turn off the heat after simmering for 1 hour.

6. Wait until it cools naturally and cook it twice.

7. Finally, after it has cooled naturally, take out the purple clay pot, dry the body of the pot, and you can start making tea.

Purple clay pot opening is a kind of learning and wisdom, and raising a pot is also a science. Before each use, we should pay attention to the cleaning of the pot, mainly to clean the oil stains and stains on it, which can make the advantages of the purple clay pot more prominent and more hygienic, especially pay attention not to get oily stains. Then the purple clay pot is like a beauty, and it also needs to be hydrated frequently.

Of course, the hydration of the purple clay pot is not carried out by **, just use it to make tea. It is often used to make tea, and the tea will seep into the soil tire, and in the long run, the surface of the pot will have a warm and moist luster like jade.

The correct way to open the purple clay pot and the suggestions for opening the pot. When it comes to tea-making tools, we have to mention the purple clay pot. The price of the purple clay pot is very expensive, and the correct opening of the pot will help to last for a long time and retain the best tea flavor. The following shares the correct way to open the purple clay pot and the suggestions for opening the pot.

1. The reason for the purple clay pot to be boiled

The purple sand pot should be opened because the purple sand pot is formed by beating the purple sand mud, and then fired at a high temperature of more than 1,000 degrees, which also needs to go through the whole process, so after the purple sand pot is fired, there will be a little impurities left, and the purpose of opening the pot is to remove the taste of these impurities.

2. The correct way to open the purple clay pot

After understanding why the purple clay pot needs to be opened, how to open the pot is the right way and the right way? Many people on the Internet have circulated different ways to use tofu or sugarcane, steam after boiling, and brush after steaming, but in fact, I tell you that the real method of opening the purple sand pot does not need to be spicy, because the mud composition of the purple sand mud is pure, and it will hardly produce a lot of impurities and odors, and even a very pungent smell.

3. It is recommended to open a purple clay pot

The real correct suggestion for opening the purple clay pot is to clean the inside and outside of the purple clay pot with warm boiled water, or make tea a few times to clean the impurities.

The purple clay pot mentioned above'Is the correct way to open a pot very simple? In addition to pouring hot water many times or making more of your own tea, if you are not at ease, you can also wipe it with a soft cloth, and then start to make tea with a purple clay pot!

When the purple clay pot is opened, clean the internal and external attachments first, then rinse it with hot water, then pour boiling water into the teapot, and cover the pot and simmer for about 10 minutes. After pouring out the boiling water in the pot, put in an appropriate amount of tea leaves and pour boiling water to brew, cover the pot and place it until the tea soup cools, and finally pour out the tea leaves and tea soup inside, and rinse it again.

The correct way to boil the purple clay pot

To open a purple clay pot, you need to clean the attachments inside and outside the pot first, and then rinse it with hot water, this step is called "waking the pot". After that, pour an appropriate amount of boiling water into the teapot and cover the kettle, and let the purple clay pot simmer for about 10 minutes.

Pour out all the boiling water in the purple clay pot, then put in an appropriate amount of tea leaves and pour boiling water to brew, cover the lid of the purple clay pot and place it until the tea soup becomes cold, you can pour out the tea leaves and tea soup inside, rinse the purple clay pot again, and then use the purple clay pot normally.

Suggestions for boiling the purple clay pot

When boiling a purple clay pot, it is recommended not to use the rumored method of opening the pot, for example, using tofu to open the pot can remove the fire of the purple clay pot, in fact, this method is likely to leave a layer of white marks on the body of the purple clay pot.

It is very necessary for tea lovers to buy a good teapot, and the purple clay pot is a kind of love and collection by tea lovers. So, how to open a purple clay pot?

First, cook in plain water for an hour. Separate the lid from the body, put it in a pot of cold water, place the pot on the stove, slowly heat and bring to a boil over a simmer, and turn off the heat after 1 hour. Thermal expansion and contraction can cause the pores of the pot body to release the earthy flavor and impurities contained in it.

Then put the pot of boiled water and a piece of old tofu into clean water and cook for another hour. This is called de-ignition gas, and the purpose is to remove the fire caused by the high-temperature calcination during pot making. After that, put the pot above and a piece of young sugarcane head and put it in clean water and cook it for another hour.

Finally, put the pot above with the tea leaves and boil in clean water for an hour. Cook this several times and you're done.

1. The correct way to open the purple clay pot: cold water pot, let the pot and the water temperature rise together, and protect the pot to the greatest extent; Be sure to completely submerge the pot in water. Because the mud will expand after ingesting a large amount of water, coupled with the effect of "thermal expansion and cold contraction", and the part that is not in the water is very small due to the degree of expansion, the force is easy to lead to cracking and fatal injury.

2. Then before the water is about to boil, remember to put some dried tea leaves into the container, and the number of dried tea leaves increases according to the size of the container. After waiting for the water to boil, turn the medium heat to low heat, continue to boil for two to three minutes, wait for the water to change the color of the tea leaves, then turn off the heat, and then take out the purple clay pot after cooling.