How classic Focus deletes trip computer memory

Updated on Car 2024-03-28
19 answers
  1. Anonymous users2024-02-07

    You can't delete it, just upgrade it directly.

  2. Anonymous users2024-02-06

    See Set up a reset? Menu Correct Things Dial Allocation Up, Down, Election Has Ended Press Set Reset Selection.

  3. Anonymous users2024-02-05

    See set reset no? The thing on the right side of the menu is dialed up、Dial down is up、Down,After selecting the set reset, it's selected。

  4. Anonymous users2024-02-04

    If you are troublesome, go directly to the 4S shop, and the maintenance personnel will do it immediately.

  5. Anonymous users2024-02-03

    Unplug the battery for 15 minutes and resume the original car program.

  6. Anonymous users2024-02-02

    Professionals are required to operate.

    It takes about 5-10 minutes for the car to reset the computer. The method of powering off the car battery to reset the computer is only the system time, single mileage, driver's driving habit information, vehicle use information, etc., and the computer cannot be restored to factory settings. Technical parameters such as throttle valves need to be reset by commanding them through an external terminal.

    The information from the vehicle's sensors is processed by the on-the-road computer. Including the fuel ratio of the car, ABS anti-lock braking system, cruise control system, body stability system, etc., are operated by the driving computer. Resetting the ECU will initialize all the data, and the trip computer needs to relearn the driver's driving habits.

  7. Anonymous users2024-02-01

    Press and hold the reset button on the left side of the trip computer to clear it

    Small mileage, average fuel consumption, and average speed can all be cleared to zero

  8. Anonymous users2024-01-31

    First of all, use the up and down arrow keys to adjust to the page that needs to be cleared, for example: short-distance travel, average speed, average fuel consumption, and the remaining instantaneous fuel consumption cannot and does not need to be cleared.

    After adjusting to that page, press and hold the OK button for about 5 seconds, then there is a prompt on the screen, and you can release it when the clearing is successful.

    If you want to clear all of them at once, please turn to the page with a split screen display, that is, there are four small screens, which display the average speed, average fuel consumption, instantaneous fuel consumption, and cruising range respectively, and then press and hold it.

  9. Anonymous users2024-01-30

    My friend has also encountered such a thing, the engine is lit up by itself, and the 4S master will just get it. It is said that the usual driving speed is slow, and I don't run at high speed, and it is normal now. Just debug it.

    I don't know if there is any basis for reference.

  10. Anonymous users2024-01-29

    4S shop with IDS elimination (* hee hee......A sucker.

  11. Anonymous users2024-01-28

    Open directly to the 4S store, and the computer restoration is simple.

  12. Anonymous users2024-01-27

    Can be upgraded, increased horsepower and torque, HDP program.

  13. Anonymous users2024-01-26

    It can't be closed, and it will automatically close in about half an hour after locking the door.

  14. Anonymous users2024-01-25

    What do you mean? It closes automatically, locks the door for about 15 minutes after turning off the engine, and then goes to sleep!

  15. Anonymous users2024-01-24

    The display of my FKS sedan 2007 was turned off last night, and today he still shows what's going on?

  16. Anonymous users2024-01-23

    It depends on the average speed of the traffic, if the LZ place is there a red light for a few hundred meters, just starting to brake, the fuel consumption will be very large, if the average speed is only about 5 km, then the manual fuel consumption will exceed 12 liters 2nd gear old stall, may speed up too low, the clutch is too fast, it will suffocate the flames. The speed at which a new car is added to the library is very low, and the high statistical fuel consumption will lead to a driving computer, and the fuel consumption data of more than three or four hundred kilometers will slowly drop the point. Fox said that the optimal shift speed is about 2500 rpm, that is, fuel economy, and the speed of upshifting should not be too low, otherwise it is easy to coke.

  17. Anonymous users2024-01-22

    There is no point in exchanging it directly. First of all, the classic Focus uses a naturally aspirated Durateche engine (the sports version uses a naturally aspirated engine), a manual 5MT automatic 4AT gearbox, and the trip computer does not provide cruise control, tire pressure monitoring and other functions. **The Focus is powered by three naturally aspirated TI-VCT engines (5MT or dry dual-clutch transmission), EcoBoost turbocharged engines (5MT or 6AT), and EcoBoost turbocharged engines (6AT), with additional features such as cruise control and electronic stability control over the Classic Focus.

    If all the data does not match the computer after replacement, the work that needs to be done is extremely complicated, and it is not recommended to replace it in this way.

  18. Anonymous users2024-01-21

    Press and hold the reset button on the left side of the trip computer to clear it

    Small mileage, average fuel consumption, and average speed can all be cleared to zero

    Personally, I prefer Focus

  19. Anonymous users2024-01-20

    These things are detailed in the manual!

Related questions
9 answers2024-03-28

Step on the throttle shallowly, keep driving at a constant speed, and don't overspeed. This will reduce the number of brakes. >>>More

24 answers2024-03-28

Select "Run" from the Start menu and enter the command "control userpasswords2", which will open the user management program. In the "Users" tab, find the option that says "In order to use this computer, users must enter a username and password", click to cancel this option, and save the settings. An auto-login settings dialog box will appear; Please enter the username and password you wish to use for auto-login. >>>More

15 answers2024-03-28

You look at the properties to see what policy is causing the warning, and then disable it in the local user policy. >>>More

4 answers2024-03-28

Summary. Hello,About your problem, I think I accidentally deleted the computer system, just replace it with a verified system disk and reinstall the system.,So that you can automatically solve the whole process、Smoothly solve the problem of win7 system damage and can't start.。 These are possible with a USB flash drive or hard disk, and the installation speed is very fast. >>>More

9 answers2024-03-28

First, set a simple password for account B. Restart, go to the login interface, press Ctrl+Alt+Del to switch users, enter administrator, and the password is the password of your account A. Since administrator is the default administrator account of the system, it will be automatically hidden when you create an administrator account. >>>More