Detailed steps on how to burn ISO image file with nero8 to make a system disk

With nero burning rom you can engrave 1Open the Nero Burning ROM selection"Burner" - "Burn the image file" 2.Find your **'s ISO file It should be noted here that the installation of WinRar will associate the ISO, so the icon may be thought to be a compressed file, but it is not, and the suffix of the display file will know that it is an ISO file, not a RAR file!

3.General engraved XP is recommended to choose"The disc is burned once"or"Discs burn 96 at a time"It's best not to be too fast, it is recommended to choose a 24X burning disc, do not unzip, it is recommended to use a nero burning rom. If you choose to burn a disc image, it is recommended to burn it with a disk image of 24x or less.

Write method: "Please select "Disc burn at once", "Operation" to select "End disc (no rewrite!") "nero burning rom Chinese Simplified Chinese Lite** address.

1.Open the Nero Burning Rom

Select"Burner" - "Burn the image file"

It should be noted here that the installation of winrar will associate the iso, so the icon may think that it is a compressed file, but it is not, and the suffix of the display file will know that it is an ISO file, not a RAR file!

3.General engraved XP is recommended to choose"The disc is burned once"or"Discs burn 96 at a time"

It's best not to be too fast, 24x is recommended

When burning a disc, do not unzip it, it is recommended to use a nero burning rom. If you choose to burn a disc image, it is recommended to burn it with a disk image of 24x or less. For "Write Method", select "Disc Burn at a Time", and for "Action", select "End Disc".

Step 1: Open the burning software, the burning software we use is nero.

Step 2: Select Copy & Backup – Burn the image onto a disc.

Step 3: First change the file type to a file type that supports ISO, and then select our ISO file. Note that the ** file on our website is an ISO file, you don't need to unzip it, just select it directly.

Step 4: Change the write speed, I generally use 24x, preferably not more than 40x.

Finally, click Next to burn.

In the first step, put the blank disc into the recorder.

Step 2: Launch the Nero burning software to enter the Nero Express burning interface.

Step 3, click Image, Project, Copy--> Disc Image or Saved Project to enter the following interface. Find the location of your system disc image (ISO file) and select it by double-clicking on it.

Step 4, After selecting the system disc image, click the Expand button to enter the burning settings interface and make the relevant settings.

Write speed Don't be too fast,*** 8x recommended; CD recommended 24x or less.

Step 5, after setting up, we can click the Burn[a] 6 button to burn.

After burning, the optical drive will automatically eject. If there are no problems with your system image and no errors in the burning process, then you can use the engraved disc to install your favorite system.

If your burning drive is still working normally, nero10 can also be used, directly load the win7 image file to nero10 to burn it, and then restart the computer and choose to boot from the disc to repair the system or reinstall the system.

You can change the burning software. Burn the master with a disc, this one is very simple, and you will know how to burn it at a glance.

The ISO is the image file, and a virtual drive is installed first. Recommend the software daemon tools. After installation, you can set the number of virtual optical drives, generally one is enough.

You will find that there is an extra optical drive in the computer, and this optical drive is virtual software. Don't be afraid of trouble, using burning software is inseparable from the virtual optical drive, which will be of great use later. Open the software and load the required disc image.

Open Nero to select the disc to copy, select the virtual disc drive in the burning**, and select the speed to burn.

There are two possibilities: One is that your optical drive does not have the corresponding burning function, then Nero will automatically ask to save it as an image.

First, the disc to use CD-R, the standard capacity of this kind of disc is 700MB, just on a disc engraved a complete XP system, buy a little bit, *** disc can not only ensure to engrave files within 700MB, but also over-engrave some, poor quality can only engrave 650MB.

Second, nero is a disc burning program produced by a German company, support ATAPI (IDE) disc burner, support Chinese long file name burning, can burn many types of discs, is a pretty good disc burning program, from the online ** "Chinese Simplified Chinese version", install nero.

Fourth, the process of burning system discs.

1. Start the neorburningrom software.

2. Set up burning.

Select "cd" from the drop-down list in the upper left corner of the left pane of the "New" window, click "cd-rom(iso)", and set the options:

1) Information. 2) Multi-Segment: Click "Start Multi-Segment".

3）iso：

Data: Data Mode - Select Mode 1

File: File System - select ISO9600+

File name length - select 11 maximum = 8 + 3 characters.

Character set - choose ISO9600 (standard);

Broadband Limit: Tick the Options.

4) Tag: Automatic.

5) Date: Select "Date and time to use source file".

6) Other: Tick "Cache files from hard disk or network".

7) Burn: Operation: Tick "Write".

Write: Write speed — 16 24

Write Method—The disc is burned once.

13. Open the burned file.

Click the "Open" button to open the "Open" window, select the disk containing the ISO file from the "Find Range" drop-down list, select the ISO folder from the list below, and click the "Open" button to open the "Burn" window.

4. Write to the CD.

Hit the "Burn" tab in the burning window to display the burning progress, and the disc will be automatically ejected after burning.