Classical guitars have a lot of noise, and the tuner of folk guitars is different from classical gui

If there is a lot of noise, it is usually necessary to change the strings.

Summary. Hello dear, the guitar has a noise treatment method:

1. The strings collide with the strings: because the string shaft hole is too close to the first line, the two strings are close, and they will rub against each other and sizzle when vibrating. Processing:

Use a screwdriver to split the two strings that rub against each other, and use a screwdriver to split the strings from above the string pillows, and stumble between the strings to separate the strings.

2. There are debris between the strings: there are debris between the strings or between the strings and the horse, and these debris will be encountered when the strings vibrate.

3. The strings rub against the strings: if the strings are not pressed tightly, the chords will rub against each other to produce noise, and the strings can be judged if the noise disappears with a screwdriver above the string pillow. Treatment: Tighten the chord screws.

4. The strings rub against the string screws: If the strings are too close to the strings, the strings will also rub against each other when vibrating, resulting in noise. Handling: A cloth can be padded between the strings and the string screws.

5. The strings rub against the other string nails: if the string nails are loose or the position is not right, the strings cannot be effectively pinned, and the noise will be generated. Treatment: Pin the pin or correct the position.

The guitar has a murmur.

Hello dear, how to deal with the noise of the guitar: 1. The strings touch with the strings: because the string hole is too close to the first line, the two strings are close, and they will rub against each other to make a sizzling sound when vibrating.

Treatment: Use a screwdriver to split the two strings that rub against each other, and use a screwdriver to split the strings that are difficult to split from above the string pillows, and trip the strings between the strings to separate the strings. 2. There are debris between the strings:

There is debris between the strings or between the strings and the horse, and when the strings vibrate, these debris will make a "sizzle" sound, treatment: clean up these debris. 3. The strings rub against the strings

If the string is not pressed tightly, the chord will rub against each other to produce noise, and the string can be judged if the noise disappears if the string is pressed against the top of the string pillow with a screwdriver. Treatment: Tighten the chord screws.

4. The strings rub against the string screws: If the strings are too close to the strings, the strings will also rub against each other when vibrating, resulting in noise. Processing:

You can put a cloth between the strings and the string screws. 5. The strings rub against the other string nails: if the string nails are loose or the position is not right, the strings cannot be effectively pinned, and the noise will be generated.

Treatment: Pin the pin or correct the position.

I hope mine can help you, if you are satisfied with my service, please give a thumbs up, I wish you all the best!

Summary. The reason why the guitar has a murmur and many times pops up the murmur is that your basic skills are not solid. The basic skill is that the finger strength of pressing the string is not enough, and it is not accurate.

If the strength is not enough, if you don't press the string tightly, the sound will split. Inaccurate pressing means that when your finger presses the string, it does not exactly press the string with the center of the finger, and it is up or down, causing the finger belly to touch the next string and produce noise. In addition, when the finger cannot be opened, one of the fingers presses the upper part of the metal product, causing the sound to pop up and make a noise.

The correct way to press is to hold the string in the center of the belly, in the upper third of the metal product, so that the sound played is full and good, as long as you can press the string according to this standard, you can eliminate the noise.

The guitar has a murmur.

The reason why the guitar has a murmur and many times pops up the murmur is that your basic skills are not solid. The basic skill is that the finger strength of pressing the string is not enough, and it is not accurate. If the strength is not enough, if you don't press the string tightly, the sound will split.

Inaccurate pressing means that when your finger presses the string, it does not exactly press the string with the center of the finger, and it is up or down, causing the finger belly to touch the next string and produce noise. In addition, when the finger cannot be opened, one of the fingers presses the upper part of the metal product, causing the sound to pop up and make a noise. The correct way to press is to hold the string in the center of the belly, in the upper third of the metal product, so that the sound played is full and good, as long as you can press the string according to this standard, you can eliminate the noise.

In addition, after pressing a string with the left hand, it should be lifted and not too close to the string, which will cause the finger to touch the empty string and produce noise, and then the right hand will touch the vibrating string when it is silenced or played, resulting in noise. With constant practice and attention to detail, you can play a clean and full tone.

Sometimes the occasional poor quality of the copper coating of the strings from the factory bezel can also cause noise, and this can also be the case with new strings.

1. You can check whether the gasket of the lower string button is loose, and the loose screw of the string button generally comes from the back of the body.

Second, whether the outer ring of the string is worn, it is generally a noise that only has a single string vibration, which can be replaced. 3. Loosen the screws of the neck (at the neck in the sound hole) and tighten the neck with an Allen wrench. Fourth, if you need to adjust the height of the piano yard or adjust the curvature of the neck (you can try clockwise and counterclockwise on the inside of the neck), you can loosen the strings, and if you can't get it yourself, you can ask a teacher or friend for help.

Fifth, the pillow and the yard are too low, at the string pillow, the groove of the string is widened, you can pad a hard plastic sheet (cut into strips) or use a utility knife to cut the groove deeper. Sixth, the strings are too loose, and the height of the strings is not tuned well, which will also produce a lot of noise. 7. Playing skills.

There are several types of tuners for folk guitars and classical guitars:

1. Guitar clamp headstock tuner. It mainly picks up the string vibration to achieve pickup, but the disadvantage is that it must be in a quiet place to avoid external interference.

2. If it is an electric box guitar and an electric box classical guitar, you can choose the effect tuning. This kind of tuning is very accurate, it is mainly the pickup to pick up the electromagnetic waves, and to achieve the effect of tuning.

3. Mobile phone software pickup. If you really can't do it, you can choose the method of mobile phone software tuner to adjust the folk guitar and classical guitar. However, due to environmental influences, the effect of voice pickup may be slightly inaccurate.

4. In addition, some speakers also have their own tuners, which are relatively rare.

It's the same, it's all standard timpani eadgbe!