How much space do you need to leave for a small home elevator

The space that needs to be reserved for the installation of a home elevator is determined according to the size of the space of the elevator equipment.

The technical specifications of home elevators are very different from those of public passenger elevators: for example, the load can not exceed 400kg, and the speed can not be exceeded, but in real life, people often require manufacturers to provide larger areas of cars or higher speeds, such as etc., which have far exceeded the manufacturing specifications of home elevators.

The recommended home elevator is Cibos, Sibes Elevator is one of the world's leading manufacturers of screw drive elevators, the size of Sibes from the smallest square meter or so) to the largest XL number, a total of 13 sizes to choose from, respectively, 1020 * 980 1220 * 980 1420 * 980 1520 * 1080 1420 * 1080 1220 * 1380 1320 * 1380 1320 * 1630 1420 * 1430 1520* 1530 1420*1630 1520*1630 1520*1760mm, no need to excavate the pit, no top height requirements, and the installation cases are distributed in various cities.

I am engaged in elevator sales, the size of the elevator shaft depends on how much load you need for the elevator, if the standard is 800kg, the hoistway should be left at least 2 meters by 2 meters, if it is 630kg, at least to stay. There are smaller ones, but they sell very little, at least not less than the multiplier, in the small is the grocery elevator. It is better to have a slightly larger hoistway, too small and not easy to install.

You can also customize the elevator according to the amount of the hoistway you have done.

The general space of the home environment is limited, now there are many home elevators that do not need a pit, with a shaft, so only need to leave space in the middle of the stairs or against the wall can be installed, the smallest CIBES screw elevator to 1200 * 993 or so reserved space, there are 800 * 830 inside for 2-3 people to use, Thyssen home elevator needs to keep its own hoistway to about 1400 * 1400, specifically to consult various manufacturers, different manufacturers have different requirements for space, There will be a little difference in the size of the different door opening directions, it is recommended to let the engineering personnel come to measure the accurate drawings to reserve, and if you have time, you should also go to the home elevator exhibition hall to experience the prototype and then choose comprehensively.

The size of the home elevator shaft is 1500x1500 net size, which is also convenient for wheelchairs, 320kg of the net size of the shaft is reserved for 1600x1600, if the elevator wants to enter four people, it is recommended to make a 320kg, the size of the home elevator shaft can be customized.

1. Reserved space for small home elevator shaft: 1200x 993 mm;

2. Reserved space for sightseeing home elevator shaft: 1200x 1380 mm;

3. Reserved space for comfortable home elevator shaft: 1565x 2320 mm.

The main types of home elevators

1. Traction home elevator.

The working principle of the traction villa elevator: there is a drive motor (traction machine) at the top of the hoistway, there is a car and counterweight in the hoistway, the car and the counterweight are connected together by a wire rope, and the rope machine is used up and down, the principle is the same as the seesaw we played when we were children.

2. Strong drive home elevator.

The working principle of the strong drive villa elevator: similar to the common winch, the main engine of the strong drive villa elevator can be placed at the top and placed at the bottom according to the height of the building, and the elevator can be up and down through the guide wheel.

3. Hydraulic home elevator.

The working principle of the hydraulic villa elevator: it is to drive the car up and down by the hydraulic ejector rod, and there is a problem that such an elevator cannot be overcome at present, that is, there will be oil leakage in about 3 years of use. The power of the hydraulic villa is:

Nowadays, more and more people are installing elevators in their families, especially what kind of self-built houses are also built very high, and they all need to install an elevator, so that it is convenient for us to go up and down the stairs, but the specifications of the home will be relatively smaller. In fact, the actual size still depends on the size of your home, from the size of the home elevator, it is generally necessary to reserve 600x1600mm space, from the perspective of the clearance size of the hoistway, 1450x1450mm is the smallest size, the load capacity is about 500 pounds, and you can take up to three people. At the same time, it should also be noted that the construction of the hoistway structure, as well as columns, walls, etc., meet the daily needs and can not be smaller than this size.

The elevator must choose the brand, such a product will be more assured to use, you have to know how much will happen to some quality products, and regularly maintain it.

Home elevator size Small home elevator villa renovation and installation of household size.

This is determined according to the situation on site. Generally, manufacturers will help to measure and come up with solutions on site for free.

What is the minimum size of a villa elevator?

There are many small sizes of home elevators, build their own shafts, to 1500 * 1500, there are also small-size home elevators with their own shafts, about one square meter can be, different manufacturers have different sizes, you can consult in detail, to see the real sample.

Generally, the big brands are more than 1600*1600, and only Thyssen's can be 1240*1310 among the big brands, which is already the smallest and can not be smaller.

Small brands can be ordered in any size, but it is estimated that the effect will be very poor when used.

The home elevator can be designed according to your requirements, how many kilograms of elevator you want to take a few people, if it is a hydraulic elevator, it will be much smaller.

Even the smallest size ladder. Consideration should be given to setting up a reservation of at least 1600x1600mm.

Five? Is this building your home, or is it just plain commercial and residential?

The whole building is your own rectification smashed on the floor and the well reinforcement is easy to deal with, just dry it up, but if it is a public house, private elevators, the process and procedure of installation are a lot of trouble.

Different manufacturers and different models of home elevator installation reserved hoistway size specifications are basically different, Xibes home elevator reserved size drawing for reference:

Reserved dimensions for home elevators.

Hello, glad to answer for you.

Hello, the size of the home elevator shaft is 1500x1500 net size, which is also convenient for wheelchairs, 320kg of the net size of the shaft reserved 1600x1600 on it, if the elevator wants to enter four people, it is recommended to do a 320kg, the size of the home elevator shaft can be customized. 1. Reserved space for small home elevator shaft: 1200x 993 mm; 2. Reserved space for sightseeing home elevator shafts

1200x 1380 mm；3. Reserved space for comfortable home elevator shaft: 1565x 2320 mm.

The minimum entry size of the elevator is 1430 wide and 1250mm deep, and the horizontal size of the elevator shaft is applicable, and the minimum net space size allowed deviation value measured by the rock hammer is when the height is less than or equal to 30m of the shaft 0 +25mm, when the height is greater than 30m and less than 60m of the shaft: 0 + 35mm, when the height is greater than 60m and less than 90m of the shaft: 0 + 50mm.

The selection method of the elevator: it is necessary to estimate the range of people in the high-rise building, calculate the actual traffic scale of the high-rise building according to the per capita usable area, and then estimate the concentration rate of the passenger flow that needs to use the elevator after the building is put into use.

Of course, it is also necessary to calculate the total number of people who need to use the elevator, when choosing the mode of controlling the operation of the elevator, it is necessary to analyze the actual use conditions of the high-rise building and then select various control modes such as parallel, group control, single division, double-decker, and group selection.

Source: How to select elevators.

It is necessary to make a detailed calculation of the actual traffic scale of the building, which refers to the number of people who are often present in the high-rise building, and is calculated according to the usable area of each person.

Estimating the concentration rate of passenger flow inside the building, the so-called estimation of the concentration rate of passenger flow, is to divide the total number of passengers that the building needs to transport every five minutes, divided by the amount of ** that is often present in the building, multiplied by 100%.

Calculate the total number of people using the elevator, that is, the total number of people who are always in the elevator under normal operation. Fourth, choose the method of controlling the elevator, and the current elevator control method mainly includes parallel, group selection, group control, single division, high division, double-layer, regional service and so on.

Answer: Hello, the minimum entry size of the general elevator is 1430 wide and 1250mm deep, the horizontal size of the elevator shaft is applicable, and the minimum net space size allowed deviation value determined by the rock hammer is when the height is less than or equal to 30m 0 + 25mm, when the height is greater than 30m less than 60m of the shaft: 0 + 35mm, when the height is greater than 60m less than 90m of the shaft: 0 + 50mm or more deviation is only applicable to the elevator with rigid metal guide rails for the counterweight device.

What is the minimum size of the residential elevator - the size of the residential elevator of the villa type The elevator size of the villa is calculated according to the load capacity, the general villa is 3-4 floors high, so the load capacity is less than 400 kg, and the size of the hoistway is 1500mmx1500mm; The top floor height is 2700mm, which is the standard size. The elevator of the villa is generally in the form of hydraulics, and the smallest hoistway size is 1430 mm wide x 1250 mm deep, and the car is 850 x 1100 mm deep. This is only a reference size, can not be used as a villa elevator standard, some villa floors only 3 floors, then it is not suitable for this size.

What is the minimum size of a residential elevator - the size of a residential elevator for home The size of a residential elevator is much heavier than that of a villa, because the floor is high and the load is large, so it is generally calculated according to the load capacity of 1000 kg. Generally, residential elevators are used to carry furniture, such as Simmons, sofas and other large items. Therefore, its hoistway size standard is 2100x2200, and the minimum is 2000x2000, which is not much different.

Home elevators are mandatory in some provinces, such as more than 12 floors, then it is necessary to install 2 elevators, while the car of an elevator can not be less than 1600 mm, the car and load capacity directly affect the size of the hoistway, so if the load capacity increases, the car will increase, then the size of the hoistway will change from the largest to the largest, which can be freely designed.

The minimum size of the home elevator is 870,910mm.

The home elevator generally covers an area and does not need a pit shaft machine room, so the minimum size can be 870*910mm.

Precautions for home elevators:

1. Determination of style and style.

The closed shaft is equipped with a closed car, which can be used for sightseeing on all sides or partially, and it is recommended to install glass windows on the door. The shape is varied, rectangular, circular, and combined, and the environmental conditions are all available, and the second is to consider personal preferences, and the third is to consider the cost and degree of difficulty. Doors with glass windows are recommended.

2. Location, hoistway space and elevator size.

The location determines the hoistway space and the size of the elevator. The middle of the stairs, the corners of the walls, and the plug-in can be used. The hoistway space is determined according to the environment, and the load capacity is recommended for 3 to 4 people, 225 to 320 kg, and the size of the car is to square meters.

The relative load capacity of the area can be larger than that of the passenger elevator, which increases the comfort.

3. Functions and safety measures of home elevators.

The user of the home elevator lacks elevator professional knowledge, there is no special elevator service personnel, and the safety can not be reduced, and it is best to configure it according to the passenger elevator. There are generally two ways to open the door: automatic door and manual door.

Home elevators on the second floor of foreign countries have no hoistway and no door, but they must have safety measures to prevent shear collisions. It is recommended that the car be connected to the city's ** extension, and it is impossible to call the police for help when the car is disturbed to prevent failure and trapped people. <>