How to ensure the speed of 2 computers on a home network?

admin password:admin Then you will see the router settings panel, and then you will find the option about Mac, there is an IP in it, one is yours and the other is your wife's, and you can set half of the 4M network cable you bought.

Give it points.

Buy a small hub, then go to Settings, and give each machine (mac) a speed limit.

Can't do both. You make an appointment, you look at the webpage, she looks at the PPS. You play the game, she looks at the page.

The boss Internet café is at least 10 trillion, your house is 2m, it's not the same, if you install 4m, it's fine,

To limit the speed of another computer, there are generally the following methods, specific steps:

2. Enter the correct username and password to enter the router management background.

3. We need to check the existing IP and the corresponding MAC address bar first. Click "DHCP Server" on the left, select "Client List", and write down the corresponding IP and MAC addresses displayed on the right.

<>5. Enter the correct corresponding MAC and IP address on the right, then select "Status" as "Effective", and then click the "Save" button to save.

6. Repeat the previous two steps until all IPs are added.

7. Click the "IP Bandwidth Control" link on the left, check the "Enable IP Bandwidth Control" checkbox on the right, and select the correct network speed below.

8. Then fill in the IP and bandwidth size to be controlled in the following rules, and also set your own computer "Guarantee minimum bandwidth", and select "Enable" for all, and then click the "Save" button to save all the settings.

Set your computer to a fixed IP, such as:

Turn on the router, QoS bandwidth settings. It depends on your broadband speed, take 4m as an example.

Set and uplink speed 150, uplink speed 20, don't be too low, don't be too selfish.

This can be set up in the router.

Buy a wireless router with mesh belt control.

See if there is a setting on your router that limits the speed.

The wireless network point can be set up.

This is the problem of the desktop, to see if there is poisoning, but there is no interference, because the packets sent out are different, will not interfere with each other, it is best to get the desktop system to do it.

The probability of interference with the wireless network card is very small, the four of us use a 2m network cable, and the four wireless network cards are no problem. You can try a ** machine with a cable to see if there is a problem. Or try a different route.

In addition, the telecom company will check the network port, and if it finds two network cards for one line, it will take restrictive measures. It's best to restart the route twice a day so that the network will be better.

Hope it helps.

The wireless network is generally automatically defaulted, and if there is any conflict between your IPs, check it. And whether your signal is good or not, and it has something to do with the speed of the Internet.