win10 notebook how to reinstall the system

Start reinstalling the system win10

Let's start reinstalling the system win10.

After opening the software, select the restore partition in OneKey Ghost, and select the official version of Win10 system image Win10 in the GHO Wim ISO image path, as shown below.

Detailed steps and methods to reinstall system win10.

Then click OK.

Detailed steps and methods to reinstall system win10.

After clicking OK, a prompt box will appear in the figure below, asking whether to restart the installation system, we click the Yes button.

Detailed steps and methods to reinstall system win10.

Next, the computer will restart, and after restarting, the interface shown in the following figure will appear, you don't need to do anything, just wait patiently for the progress bar to finish.

Detailed steps and methods to reinstall system win10.

Then the computer will be restarted again, it will enter the process of installing the win10 system, the general installation takes 5-15 minutes, the same we don't need to do anything, wait patiently until you enter the desktop, the reinstallation of the system is completed.

Detailed steps and methods to reinstall system win10.

END After the system is reinstalled win10.

Check whether the device manager driver has been fully installed, if not, you can drive life, drive wizards and other tools to repair the driver with one click. Manually adjust the optimal resolution of your computer display.

Copy back the backup data before the system was reinstalled.

At this point, the reinstallation system win10 has been completed.

Bring your own win10 installation disk (U disk).

Reboot, when the boot logo appears, click ESC continuously to select the startup item (the product line is different, the entry shortcut key of the startup item is different, ASUS notebook is pressed ESC, desktop or motherboard is pressed F8).

After selecting Start USB flash drive in the startup item, the boot image begins.

Once you've selected settings such as language, keyboard, etc., select Next

Click "Install Now".

The installer is starting.

In the stage of verifying the key, you can enter the key directly, or you can choose to skip it temporarily.

Agree to the license terms.

Select Custom

Next, partition, [Windows 7 needs to click "Drive Options (Advanced)"].

Click New to allocate the size of the C disk, here 1GB=1024M, and allocate the size according to your needs.

If you need to allocate 100GB for the C drive, then it is 100 1024=102400, and in order to prevent it from becoming, you can add 5-10MB more

Here divide the 127GB hard drive into a partition, click New and click Apply.

Windows will automatically create a boot partition, select OK here.

After the C disk is created, the system reserved disk is automatically generated, so you don't have to worry about it. This partition will be automatically hidden after the system is done, then select the path of system C installation, and click Next.

If you have a lot of areas, don't choose the wrong installation path.

Files are being copied and prepared, and most of the next stages are automated.

The following diagram shows that all the steps are done automatically, and then they will be automatically restarted.

Windows will restart automatically, and the USB flash drive can be unplugged at this time.

Windows still loads the process automatically after restarting. During this period, it will be restarted several times, and the setup is being prepared.

When it is ready, it will restart, and it is time to verify the product key, and you can enter it directly if you have a key, or you can temporarily choose to talk about it later.

Quick to get started interface, choose to use Quick Settings.

Wait a moment. At this point, the system is almost installed, create an account and password for this computer, and leave the password blank means that you have not set a password.

Next, the Windows settings are applied and wait for the final configuration to be prepared.

Windows is installed, so please enjoy it.

Automatically jump to the desktop.

The specific tutorial shares the system package, just follow the steps to install it.

Reinstall the win10 system on the computer. There are several ways to do this. If your computer has an optical drive, you can buy a system disk and install it through the system disk.

Or your computer doesn't have an optical drive, you can install it with a USB flash drive. Copy the win10 system to the U disk, and install it through U boot.

Then look for the desktop motherboard, laptop brand, USB flash drive, start shortcut key (you can also tell me the brand directly, I'll find it) and you're done.

1.Insert the USB flash drive into the computer where you need to reinstall the system, turn it on, and press the shortcut key you found earlier. The boot menu will pop up, select the USB flash drive, press Enter.

2.At this time, the computer will enter the PE system and wait for the loading to finish on the desktop. Open the USB flash drive and copy the image to the D drive.

3.After the copy is complete, exit the USB flash drive.

4.Click one click to install the system, select the image of the D drive, click start, and the computer will automatically restart when it is finished.

5.Just wait for the installation to end.

How to reinstall the system win10 for the laptop system? The steps are as follows:

1. First close the anti-virus software on our computer to prevent blocking the installation steps, and then open the installation software. After inserting the USB flash drive, click "Production System" - "Start Production".

2. Select the win10 system you want to install, and click "Install this system".

6. Then we will start the U disk into the computer you want to install, open the computer and keep pressing the U disk to start the hotkey (generally "F8, F12"), if you don't know, you can go to the official website to inquire, and then choose.

card-reader: press the enter key.

7. Then we will enter the PE system, select the win10 system we want to install and click "Install".

8. After the installation is complete, click "Restart Now".

9. Then we wait for the computer to reboot and then enter the win10 system desktop.

In the "OneKey One-Click Restore" software panel, switch to the [General] layout. In the Restore System section, click Open to enter. In the Open pop-up box, select and click Open.

In the "General" section of the "OneKey One-Click Restore" software, select [Partition C] and click [OK] to finish.

Tools Raw Materials:

Lenovo Xiaoxin Air12

Win10OneKey one-click restore.

1. In the "OneKey One-click Restore" software panel, switch to the [General] layout.

2. In the "General" layout, select the [Restore System] option.

3. In the "Restore System" section, click [Open] to enter.

4. In the "Open" pop-up box, select [ and click [Open] to enter.

5. In the "General" layout of the "OneKey One-click Restore" software, select [Partition C] and click [OK] to finish.

Many brands of laptops come with a system recovery function, so find out the make and model of your computer, and then call the brand's customer service for consultation. If you do not have the backup and restore function, you can directly find a system installation disk and set the boot sequence correctly to load the installation system.

Laptop installation win10 is the same as desktop, the difference is that the corresponding version of the notebook will have more drivers for the notebook.

360 Security Guard has a system reinstallation tool that can be used to restore the initial state of the system.

The laptop can be reinstalled in the same way as a desktop computer.

Laptop installation windows10 system and desktop is the same, first of all, there is a good system installation medium, such as windows10 installation disc or installation USB disk, plug it into the computer, boot up, enter BIOS settings, set the CD or USB disk as the first boot device, save and restart, it will automatically start the installation from the CD or USB disk, and the installation steps can be operated.

1. Press and hold the "win+r" key at the same time to open the "Run" window, enter ", click "OK", find the corresponding service item, and click "Stop".

2. Press and hold the "Win+R" key at the same time to open the "Run" window. Enter "C: Windows System32 Spool Printers" and click "OK" to delete the files in the open folder.

3. Press and hold the "win+r" key at the same time to open the "Run" window, enter ", and click "OK".

4. Find the corresponding service item, double-click to open it, click "Start", and change the startup type to "Automatic".

Use win10 system disk boot, repartition the disk according to the operating system installation prompts, format, and install the operating system.

I believe there are still a lot of friends who use the win7 system don't know how to reinstall the win10 system, the following brings you the computer reinstallation system tutorial win10, if you are not clear, come and learn it together.

How to reinstall the system win10:

Method 1:Use the berry one-click reinstall system software, hail royal lift.

As long as you select the version in the software, the backup file can be reinstalled with one click.

Method two

2. After entering the installation interface, select the language to start the installation.

3. Click "Install Now" to start the installation of Yuanbi.

4. Click "I accept the license terms" to start the installation.

5. At this time, click Custom Install Win10.

6. Then click New to start installing the disk.

7. Then start formatting the newly created disk.

8. After formatting, you can enter the preparation stage.

9. After a few minutes, the preparation is completed.

10. Finally, wait for the installation to be completed and you can use it.

There are still many users who don't know how to reinstall the win10 system, resulting in their own inability to repair and maintain the computer when the computer is stuck, so today I brought you the computer reinstall system win10 tutorial, the operation is very simple, come and learn it.

How to reinstall the system win10:

Method 1:

Use the berry one-click reinstall system software to reinstall win10, see [Installation Tutorial] for details

Method two

1. First of all, you need to use the 360 security guard software, open it and click "Functions".

2. Then click "System Tools" in the left taskbar.

3. Find the first one-click installation icon in the fourth row in the right column and click it.

4. At this time, you need to wait for the updated progress bar to complete.

5. After the world, several people can install the missing interface, and select the required software to install it together.

Method 3:

If you find the above method of installation more troublesome, you can also choose to reinstall the system with one-click installation.

This system is the original system of the genuine Duan family, which can help you install it very quickly and well, and it is very powerful without any problems.

With just one click, it can automatically help you complete the installation, and there will be no problems and troubles, which is very convenient.

The super fast system can be installed for you in just a few minutes, and it is especially powerful and highly compatible.

There are also a lot of driving balance and essential software to bring you to use cool, if you need it, you must not miss this good system.