How to replace the battery of your iPhone 6 by yourself

Updated on number 2024-03-28
4 answers
  1. Anonymous users2024-02-07

    Buy an iPhone 6 with a built-in battery.

    The seller will provide a dismantling screwdriver and suction cups.

    Use a screwdriver to twist out the two screws on both sides of the charging port.

    Use a suction cup to suck the screen on the home button After sucking it, you can see the battery by gently pulling it on the net, I have changed a lot of it, I wish you a successful battery replacement.

  2. Anonymous users2024-02-06

    Bidding? Take it easyIn one's element? A rising tide lifts all boats.

  3. Anonymous users2024-02-05

    1. Apple iphone 6 can replace the battery. However, don't easily replace the battery of your iPhone 6 by yourself. Even if you have to replace it yourself, pay attention to the quality of the battery, and if you don't understand it, you have to take it to a professional to help.

    2. The detailed steps to replace the iPhone 6 battery can be found online.

    Detailed steps: Step1: Get the following tools and parts – iPhone6 battery and iPhone repair kit. A new battery, a special screwdriver, a pick, a mask, and a screen suction cup need to be purchased.

    Step2: Find the two pentagonal screws on both sides of the phone's charging port. To turn on the iPhone 6, you just need to unscrew these two screws.

    Step 3 Find what you want to do? Unscrew it, of course!

    Step 4 Suction the suction cup in the repair kit next to the home button, gently suck up the screen, don't open it too much, as long as there is a thin slit.

    Step 5 Take a plastic sheet or credit card and insert it into the seam, and cut it along the small seam to the top.

    Step 6 Gently lift the screen up until it is close to 90 degrees, but not more than 90 degrees.

    Step 7 You can choose to remove these screws first, you can remove the whole screen, it will be better to replace the battery, wait until the battery is replaced and then lock the screen back. Step 8 If you want to remove the screen, unscrew all five screws first, and then remove the fixing piece connected to the screen.

    Step 9 When it's the battery's turn to come back, unscrew the two screws of the battery retainer and remove the retaining tab.

    Step 10 Remove the retaining tab and prepare to remove the battery. Step 11 Use a hair dryer to heat the back of the body, because the battery of iPhone 6 is fixed with thick glue, and the glue will melt after blowing hot with a hair dryer, remember not to use anything hotter than the hair dryer, and don't blow too hot.

    Step 12 Slowly remove the battery and where it comes from, you can use plastic sheets or credit cards to assist, and try to leave the glue on it, which can be reused.

    Step 13 Install the new battery, if the original glue is not sticky, you can use a thin double-sided tape to reinforce, and then fix the fixing piece as well, so that everything is the same as the original.

    Step 14 Remember to lock the screws of the screen back on. Step 15 You're done!

  4. Anonymous users2024-02-04

    I won't change it myself, it's easy to mess with something else! Go below to change the original iphone6 battery for only 180 yuan.

Related questions
8 answers2024-03-28

In the process of using Apple mobile phones, there may be problems with the hardware or software of the mobile phone, and the mobile phone will occasionally have a black screen. When there is a crash, how do we solve it? I'd like to introduce it to you today. >>>More

16 answers2024-03-28

iPhone6 to set the screen color of the operation as:

Step 1: Click on the desktop "Settings" icon. >>>More

5 answers2024-03-28

2 Connect iPhone6 or iPhone6 Plus to the computer through a data cable, then open the "Sync Assistant", and then the tool will automatically recognize the iPhone6 phone, the first time you connect to the computer, you need to install the driver for iPhone6 first, and then you can see the following operation interface, click the [Clean Junk] button behind the bottom capacity, you can clean up the cache. >>>More

3 answers2024-03-28

1. The mobile phone enters DFU mode, steps: when the phone is turned on, connect it with the computer with a data cable. Press and hold the power off button for 2 seconds; Then, press and hold the power off button and the home button at the same time for 8 10 seconds; Finally, keep holding the home button for 15 seconds. >>>More

7 answers2024-03-28

Tools Required: iPhone6 phone.

To set up a silent photo step: >>>More