Excuse me, how to measure the house in home decoration, and what skills can be measured quickly and

Prepare room measuring tools.

The basic tools needed to measure the room are tape measure, paper and pen, and the tape measure is good with a length of more than 5 meters. Other tools include cameras, drawing tablets, laser measuring instruments, etc.

The traditional use of a tape measure to measure the room is more troublesome to operate, and the measurement error is also large. Nowadays, the tools of the measuring room are becoming more and more advanced, such as the laser rangefinder, which is simple to operate, and the value can be reflected with a light photo, and the accuracy is very high.

Make room drawings.

If you don't have a floor plan with you, you need to draw a rough floor plan on paper on the spot. Figures don't need to be too dimensional, as long as they can be labeled.

Implement measurements. Measuring the room is a trivial process, which can be basically divided into measuring, looking, touching, taking pictures, and asking.

The correct order of measuring the room: the measuring room generally starts from the entrance door, turns a circle to measure, and then returns to the other side of the entrance door, and measures all the rooms in the house. If it is multi-layered, in order to avoid missing measurements, the order of measurement should be one layer after the other layer is measured, and the order of the room should be from left to right.

Length and height measurement method: When measuring the length and height of a specific room with a tape measure, the length should be measured close to the ground, and the height should be measured close to the corner of the wall. There are no special circumstances, the floor height is basically certain, and you can find two places to measure the average floor height.

Doors and windows and other positioning methods: all the dimensions are segmented, like geometry divided into several, after the measurement of the data at any time, first measure the length, width and height of the door itself, and then measure the left and right interval size of the door and the wall to which it belongs, and measure the interval size of the door and the ceiling.

Take a photo and keep the bottom file.

In order to have a better grasp of the whole space, it is good to be able to take pictures when measuring the room, which is conducive to the accuracy of the later design.

The designer exchanges opinions with the owner.

When measuring the house, the designer should conduct preliminary communication and exchange with the owner, see the owner's requirements for the concept of the house and the use of functional areas, and preliminarily judge the feasibility of the owner's idea according to the site situation.

Usually experience is the most important!! But you can start by "virtual designing" to gain experience! Draw a schematic diagram of the house type, do a comprehensive design on it, and you will find out what dimensions you need, draw a line on these places, and put a question mark.

Wait for the time you go to measure the room, take a careful measurement! Even so, there will be omissions, and if you design a few in a row, the omissions will slowly disappear!

Use a tape measure to measure the length, width and height of each room, and finally add it up to the easiest.

Although the environment is small, it is very necessary for the decoration of the house. Measuring the house is not simply measuring some data, it is related to the quality and effect of the decoration of the whole house, if you want to measure the house, you must master, the method and skills of decorating the room, let's take a look at the precautions for measuring the house.

First, the method and skill of decorating the room.

1. Spatial partition measurement.

Before the house is renovated, we must pay attention to the method of measuring the room, we must calculate the size according to the length, width and height of each hall, because each space is different, so the size of the measured area is also different, and the designer will put forward reasonable suggestions according to the owner's preferences and living habits.

2. Positioning measurement of all kinds of furniture.

When measuring the room, we must measure the positioning of the indoor furniture, mark the location of doors, windows, air conditioners, toilets, smoke pipes and gas pipes, floor drains, etc., and be sure to measure the exact location, so as not to affect the overall decoration quality and effect of the house.

3. Measurement of house structure.

When decorating and measuring the house, it must be measured according to the structure of the house, due to the different buildings and structures of each house, the effect of decoration is completely different, when measuring each room, we must check the height difference of the room area, so that the design drawings are accurate.

4. The order of measuring the room.

The measuring room must be in the correct order, so as not to miss items, generally start from the entrance door to measure, return to the entrance door in accordance with the relevant order, and measure the whole house.

5. Pay attention to measuring the length and height.

When measuring the length and height of a specific room with a tape measure, the length should be measured close to the ground, and the height should be measured close to the corner of the wall. There are no special circumstances, it is basically certain, just find two places to measure the average.

6. Positioning measurement.

When carrying out positioning measurement, it is necessary to grasp the size of such a measuring room are segmented, just like geometry divided into a number of pieces, after the measurement, the data is recorded at any time, first measure the length, width and height of the door itself, and then measure the left and right partition dimensions of the door and the wall to which it belongs, and measure the interval size between the door and the ceiling.

2. What are the precautions for measuring the room?

1. The tools are ready.

When measuring the house, we must pay attention to the tools to ensure that the house can be measured normally to avoid affecting the overall decoration of the house. General measuring tools include tape measure, paper, pen, camera, etc.

2. Take pictures of shirts in advance.

When the house is decorating and measuring the house, it is necessary to measure the size of the house according to the floor plan proposed by the owner in advance.

3. Data recording.

When the house is measuring, it must be measured according to the spatial structure of the house, and the data such as furniture placement, doors, windows, water and electricity, switches and sockets are recorded and rolled to prepare for it.

4. Hydropower pipelines.

For the measurement of kitchen and bathroom space, it is necessary to pay special attention to the water and electricity pipes in the room, clearly mark the location of the water inlet and outlet, and let the property provide the water and electricity circuit diagram in advance to know the layout of the hidden line.

Home decoration design is a popular industry on the market, home decoration design needs to often go down to the construction site to measure the size, check the size, so learning to measure the house is an essential skill, so how to measure the house in home decoration design? Let's learn together with a closed book.

1) Room measuring tools.

1. You need to prepare a backing board and a few sheets of A4 paper, so that it is more convenient to record the structure and size of the house. In addition, be sure to prepare a few more pieces of A4 paper to avoid the embarrassing situation of making a mistake or not drawing enough and looking for paper everywhere.

2. A black pen and a red pen should be prepared, the black pen is used for drawing, and the red pen is used to record the size. Also have a few refills on hand, just in case.

3. Prepare a measuring instrument. When measuring the size of the relatively long distance, the use of infrared measuring instrument can reduce the workload, the efficiency is also higher, and to a certain extent, the size error can be reduced. Be sure to put the rope of the instrument on your hand when using it, otherwise the instrument is easy to be damaged.

4. Prepare an ordinary tape measure, which is mainly used with the measuring instrument to measure the small size or when the infrared rays of the measuring instrument do not fall at the point.

5. Tape measure. Generally, it is rarely used indoors, and most of them are used for the measurement of outdoor irregular areas, especially when measuring villas.

2) Measurement steps.

1. After arriving at the house that needs to be measured, first walk around the house to have a general understanding of the general structure of the house, and observe more around the house. Then start to draw the structural drawing, in which the columns, beams, and load-bearing walls must be drawn accurately, and the other wall partitions must also be drawn accurately.

2. Wait until the sketch is finished and start measuring the size. If the amount of work is relatively large, it is best to go with two people, one is responsible for recording and the other is responsible for measuring, which can improve work efficiency. When measuring the size, you can measure in a clockwise direction or in a counterclockwise direction, but don't run to another room to measure before you finish measuring it, so it's easy to miss something.

3. After the size is measured, you must remember to take pictures and archive them, so that it is convenient to turn them out and observe them at any time when drawing on the computer, and you don't have to run the construction site. When taking pictures, you should also pay attention, don't shoot everything, you should take pictures of some tube positions or more complex structures.

4. After returning to the company, you need to draw the original structure drawing with CAD on the computer, and it is best to let the person responsible for recording the size to draw, because only the person who records the record can better understand the size and sketch he draws.

Learning to measure a room is an indispensable skill in home decoration design, so it must be taken very seriously. The above is a detailed introduction to how to measure the house in home decoration design, you want to learn about home decoration design, you can learn more about it, I hope the above introduction can help you.

Before decoration, the designer must need to measure the new house in advance, and then give a suitable decoration design draft, so what are the specific measurement methods of measuring the house? Next, let me take you to take a look.

1. Use a tape measure to measure the height and length of each room, and measure it in strict accordance with the standard way when measuring, the length should be close to the ground, and the height should be measured close to the corner of the wall.

2. Strictly record the specific size of the room and the room, and understand the structure between the two rooms in detail and clearly.

3. It is also necessary to measure the length, width and height of the door opening, and record the left and right interval dimensions of the wall where the door opening is located, as well as the distance between the door opening and the ceiling.

4. Measure the distance between the window hole and the ground foundation.

5. After measuring, record the size of switches, sockets and pipes in detail, especially the relevant data of kitchen and bathroom.

6. Errors are not avoided, after the measurement, you can re-measure according to the original method, and check whether the measurement data is consistent again.

7. If there are special things to remember, you need to mark them with different colored pens.

8. After the secondary measurement is completed, check it again to ensure the accuracy of the measurement data.