How to deal with iPhoneX won t turn on full black screen failure?

Several situations and solutions for the black screen of the Apple mobile phone and the solutions:

One situation where the iPhone itself is unstable, resulting in a black screen. This kind of black screen can be attributed to an unstable automatic shutdown, which is because the machine is of poor quality, resulting in shutdown for no reason. Because there is no big problem with the hardware, you can just press and hold the power button and wait for it to turn on.

The second scenario. DFU mode is the mode in which the Apple system cannot be turned on if there is a problem, while entering the recovery mode can be recovered with iTunes. But the phone is fine, and it can't be turned on because it can't be turned on because it has entered DFU mode by mistake, but it's actually very easy to solve.

You only need to press and hold the power button and the home button at the same time and wait for the iPhone to react, generally for more than 10 seconds, if there is no response for tens of seconds, the following steps continue.

In the third case, you need to enter DFU mode, first of all, iTunes must be installed on the computer, and you can ** a new iOS system. Or restore files with a backup beforehand. Of course, during the recovery process, the computer can be connected to the Internet, and it can also be ****, but the wait is longer.

First check if the battery is normal.

Good afternoon, friends, I'm Brother Lan Ruixing!

Thank you for your continued support to our Blue Ray Drawings team, we have been working hard to create more complete electronic repair drawings.

Lan Rui. In order to let you better understand the Lanrui team, we will share some practical experience with you from time to time, hoping that when encountering the same fault problem in the later stage, peers and friends can take less detours and improve maintenance benefits more effectively.

Lan Rui. Recently, due to the upgrading of the studio stall decoration, there are few cases released, and the brothers in the same industry will forgive me, and we will update it as always in the future!

Today I want to share with you a repair case about iPhone X that does not turn on due to normal use and charging.

Lan Rui. After the phone arrived, based on the previous repair experience, we initially locked the fault on the U6300

Lan Rui. Lan Rui.

Because we haven't updated the point map yet, the specific maintenance process will be released in ** mode first, as shown in the following figure:

Lan Rui. Lan Rui.

Lan Rui. Lan Rui.

Lan Rui. Lan Rui.

Lan Rui. In fact, the iPhone X is not as complicated and difficult to repair as imagined, as long as you pass the test manually, everyone can repair it.

Lan Rui. Lan Rui.

Lan Rui. Lan Rui.

Lan Rui. Lan Rui.

Lan Rui. After the specific test, we directly replaced the IC U6300 and reinstalled the test, and the mobile phone was turned on normally.

After the machine is turned on, it is also necessary to test whether the charging function is normal, and the fault can be solved only after the functions are normal.

That's all for today's maintenance sharing, I'm Brother Lan Ruixing, we'll see you next time.

There are six possible reasons why iPhone X won't turn on with black screen.

1. The boot line is abnormal: use the external power supply to supply power to the mobile phone, use the electric meter to detect whether the indication has changed, if there is no change, it is likely that the boot line is broken or the boot button is not in good contact.

2. The power supply circuit of the battery is abnormal: use the external interface to supply power to the mobile phone, see if it returns to normal when it is turned on, and if it is normal, it is determined that the power supply circuit of the mobile phone is abnormal.

3. The IC of the mobile phone power supply is abnormal: test the test point of the peripheral circuit of the power supply IC according to the circuit principle diagram to see whether the test value is normal.

4. The system clock and reset of the mobile phone are abnormal: you can use the dual total oscilloscope to detect the CPU power supply of the mobile phone and check whether the waveform in the reset is correct.

5. Problems with logic circuits: that is, faults in mobile phone circuit boards, which can generally be solved by repair welding.

6. Software conflict: The installed software does not match the system of the mobile phone, which may also cause the mobile phone to fail to boot, you can connect the mobile phone to the computer to delete the program.

I hope you can give me my opinion, thank you!

Reasons why the Apple phone can't turn on:

1. There is no electricity. If you use up all the battery power, the charge needs to be charged to 5% before it can be turned on normally. So in this case, please let the phone charge for a while before trying to turn it on.

2. Software malfunction. If you are sure that the current battery of your phone is sufficient, but it cannot be turned on normally, there may be a problem with the software system of your phone. At this time, we can try to press the home button + power button on the home screen of the mobile phone at the same time until the screen is lit up and there is a display.

3. System crash. If none of the above solutions work, and you see an iTunes connection screen on your iPhone's screen, it means that your phone has entered recovery mode at this time. When this happens, the only way to do this is to restore the system for your phone.

Connect your phone with the computer with a data cable, press and hold the home button and the power button at the same time for 10 seconds, then release the power button and continue to press and hold the home button for 5 seconds, if you see the connection to iTunes, it is a failure, and you have to start again. If the screen doesn't light up after these 2 steps, you will enter DFU recovery mode, and then you can use iTunes to restore your iPhone, or use a third-party flashing software to reflash your iPhone.

Is the phone dead, you can try to force restart the phone, press and hold the power button and volume button to force restart it.

iPhone XR phone suddenly black screen does not turn on, charging is hot, with this artifact perfect repair.

iPhoneX suddenly has a black screen and can't turn on?Let's take a look.

Plug in the charging device and try, if it can be turned on, it is a problem with the battery, just replace the battery.

If it's not a battery problem, then see if there is a problem with other hardware, such as a broken screen and a black screen caused by water inside, this situation must be repaired.

Try to force restart the boot, press the volume + once, press the volume down again, and then press and hold the power button until the white apple logo appears.

If the above method does not work, please try plugging in the power supply and pressing the volume up and down buttons at the same time, this is to detect whether the automatic black screen shutdown is caused by the battery running out suddenly.

If there is only a black screen by chance, it may be caused by a software conflict, just uninstall the software, if the number of occurrences is more frequent, it is best to find after-sales service to check whether there is a problem with the hardware.

The solution is as follows:

First, the iPhone itself is a refurbished machine or other machine with quality problems, and occasionally there will be an unstable black screen, but it is not a damaged screen.

The second, which entered Apple's DFU mode by chance, is Apple's recovery mode.

The third possibility is that the Apple system won't boot.

The fourth is that the hardware is damaged and the screen is broken.

It needs to be sent to the Apple after-sales center for repair

What should I do if the apple black screen is hot and can't be turned on, the beauty will tell you the solution and help you get it easily.

Hello, I am happy to serve you and give you the following answers: There may be many reasons for the occurrence of black screen skinning, such as: 1

Low battery: The battery of the Apple X is low, which may cause a black screen. The workaround is to connect the Apple X to a power source and wait for the battery to fully charge.

2.Hardware failure: The hardware of the Apple X may malfunction, resulting in a black screen.

The solution is to send your Apple X to a professional repair shop where it will be inspected and repaired by a professional technician. 3.Software glitches:

The software of Apple Feast X may malfunction, resulting in a black screen. The workaround is to reinstall the operating system of Apple X or use iTunes for recovery. Personal Tips:

1.Check the battery level regularly: Check the battery level of your Apple X regularly to avoid a black screen caused by low battery power.

2.Backup data regularly: Back up the data of Apple X regularly to avoid data loss caused by software malfunction.

3.Update the software during the fixed period: Update the software of the Apple X regularly to avoid the black screen caused by software failures.