What should I do if the power on button fails when the mobile phone is flooded, and the other things

If you are using a Huawei phone.

It is recommended that you proceed as follows:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple processing, but the mobile phones are made of precision electronic components.

There is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the after-sales maintenance process, data may be lost.

1.Disassemble the whole machine and prepare it for use with the appropriate screwdriver. 2.

When removing the screen, gently separate the chiplet to which the screen is connected to the motherboard from the motherboard. 3.Before removing the metal shielding isolation layer, be sure to tear off the network access card and the card slot sticker under the network access card.

4.Take a hair dryer and blow dry, not in front of the screen for a long time, such a high temperature will damage the screen5Blow the front and back of the motherboard to ensure that there is no moisture left, and try to blow out the water at the earpiece.

6.Put the disassembled phone in a noisy place, preferably for about two days, and then install it.

Find someone to take a look at it, and if you can't fix it, replace it with a new one.

Unfortunately, if you are using a Huawei mobile phone, in order to reduce your losses, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

My phone is outdated, as long as I put that phone away for two or three days, I don't need him to ask for it, and basically the reading will be back to normal. A small mobile phone on the alley has been several times, all like this, when the water is thrown out, and then let him dry, after four or five days, the mobile phone will be naturally good, it is dry inside and there is no water, and it is good if it is not connected to electricity.

You can put the phone in the rice pile for three days, let the rice absorb the water in the phone, and then try whether the power button is normal, or take it to the maintenance point and let the professional repairman help you dry the water inside. Check it out.

The mobile phone is flooded, the boot button button is out of order, and the other normal ones should be the boot button is in poor contact to cause the key to fail, so like this, the machine must be repaired after opening.

In this case, it is estimated that it is caused by water ingress into the mobile phone, and it is best to go to the designated repair station of the mobile phone to check it.

Summary. 1.It is safe to dry in a ventilated place, but it takes a long time, many days.

2.It is dried in the sun, and the time is relatively fast, but there may be other problems due to the high temperature, and there may be water vapor.

3.Drying with a hair dryer is the same as the second method, and it doesn't feel ideal.

4.Find a little more desiccant, wrap the mobile phone with some thin paper towels (to prevent the desiccant from entering the mobile phone), put it in the desiccant, and you can be assured that the boot time is fast and the effect is good within 24 hours.

5.Or buy a professional roaster, which is faster, but the temperature can only be below 40 degrees, and the battery must be removed. Lest**.

What should I do if the water switch button of the mobile phone fails?

1.It is reliably opened to dry in a ventilated place, but it takes a long time, taking many days2It is dried in the sun, and the time is relatively fast, but there may be other problems due to the high temperature, and there may be water vapor.

3.Drying with a hair dryer is the same as the second method, and it doesn't feel ideal. 4.

Find a little more desiccant, wrap the mobile phone with some thin paper towels (to prevent the desiccant from entering the mobile phone), put it in the desiccant, and you can be assured that the boot time is fast and the effect is good within 24 hours. 5.Or buy a professional roaster, which is faster, but the temperature can only be below 40 degrees, and the battery must be removed.

Lest**. The key fails to turn off the machine.

**And install the "Free Power Key" app on your phone. Of course, there are many applications with the same function, such as the "release power key" and "quick power key" in the comparison, and the specific use method is similar to the "release power key", so here is "release the power key"...Run the Free Power Key app installed on your phone.

Newly installed applications require root access to run. So if the phone is not rooted, the software will not work. Go to the app and turn on the 'switch' after the 'volume button is on'.

There will be another request for root privileges, just agree.

Either change to a mobile phone, or find after-sales repairs.

Many of my friends have had the experience of dropping their mobile phones into the water. But we all know that electronic products are most afraid of water, after falling into the water, in addition to the failure of the buttons, there may be a lot of problems, it may be scrapped. What should I do if the phone is flooded and the button fails?

1. It is reliable to open it and dry it in a ventilated place, but it takes a long time, many days.

2. Open the sun to dry, the time is relatively fast, but there may be other problems due to the high temperature, and there may be water vapor.

3. Use a hair dryer.

Blow drying is the same as the second method, and the feeling is not ideal.

4. Find a little more desiccant.

Wrap the mobile phone with some thin paper towels (to prevent the desiccant from entering the mobile phone), put it in the desiccant, and you can be assured that the boot time is fast and the effect is good within 24 hours.

5. Or buy a professional baking machine, which is faster, but the temperature can only be below 40 degrees, and the battery must be removed to avoid **.

The above is all the content brought to you about what to do if the mobile phone water button fails.

If you are using a vivo mobile phone, you can bring the mobile phone to the vivo customer service center for testing and maintenance, and the professional and technical personnel of our service center will properly handle it according to the test results and after-sales service policy.

First, remove the battery and put it in a dry place with poor sun exposure.

Second, use a hair dryer to blow the unplugged phone for 10-15 minutes, then place the phone in a sunny place for about 2-3 days, and the battery will also sit for 2-3 days.

Third, after three days, confirm that the phone is completely dry and there is no water, this depends on the judgment and feeling with your eyes, because no one can see inside the machine, and then plug in the battery, turn on the charger, and turn it on, so it's good.

After the phone gets into the water, the first thing to do is to turn off the power, of course, instead of pressing the power off button, but remove the battery. Because as soon as you press the shutdown button, the mobile phone will be powered on, and it is likely that a short circuit will occur, causing damage to the mobile phone, and then send it for repair as soon as possible. If your phone's warranty has expired and you don't want to send it for repair, you can boldly take it apart!

Wipe the parts of the phone with a tissue, and then blow it with a hair dryer for a few minutes, in order to ensure that all the internal parts are dry, it is advisable to air dry the phone for a few more days before you can turn it on again.

The solution to the failure of the phone's water ingress button is:

1. After the phone is turned off, I can wrap the phone with a towel or a paper towel with good water absorption, which can absorb most of the water.

2. You can also put the mobile phone that wipes the water in the tea leaves, the tea has very good water absorption, so that the water that enters the screen can be sucked out.

3. After a few days of water absorption, we can try to turn it on, if the phone returns to normal, we can continue to put it in the tea for a few days, if not, it is best to go to the mobile phone repair shop for repair.

If you have the ability to do it, you can disassemble the back cover of the mobile phone, use a hair dryer to dry the water in the mobile phone, and then turn it on. Faulty keys can be replaced.

After the Apple mobile phone enters the water, the first thing to do is not to force the phone to turn on and off, in order to prevent damage to the mobile phone and avoid the gains outweigh the losses. Then remove the battery and put it in a dry place where you can get sunlight for 2-3 days, and the same is true for mobile phones. Wait for about a while, and give it a try at boot.

In addition to this method, you can also collect some desiccant, drying boxes, etc. Seal the watered iPhone and desiccant together, so that the moisture gradually dissipates, and then try whether the boot button can be used normally and does not fail.

Water gets into your phone, which can cause your motherboard to burn. Or it is said that the head is faulty, and there are many possibilities for the camera to have problems, so it is better to try to repair it.

The system or hardware ** suddenly failed, it is difficult to say what the specific problem is, you can only use it first, if you don't make it again, it's fine, if it is very frequent, you can go to the after-sales service to see.

It's possible. Put the mobile phone soaked in water into the rice to absorb moisture. I said on the Internet, I haven't tried it, and I don't want to try it.

The phone water entry exit button is out of order, like this must go to the phone. After-sales maintenance, because his exit key failed, it is a poor contact, and the machine must be turned on. It can only be restored if it is repaired.

If the phone is flooded, if the exit button fails after the phone is flooded, then it is quickly turned off, after shutting down, and then waiting for the water to dry and then reboot to see if the situation will be good?

Hello! In this case, it is recommended that you go to a specialized mobile phone repair shop. Disassemble the phone. See if there are any parts inside that are soaked in water.

What should I do if the exit button fails when the phone is flooded? I think the phone is flooded and the exit button is out of order, so what should I do if the phone is out of water and the exit button is out of order? I think the phone is flooded and the exit button is out of order, so go to the repair department to repair it to a professional, and it will definitely be repaired for you.

What should I do if the exit button fails when the phone is flooded? I think that in general, the phone is out of power when the water enters and the exit button fails, so you let him run out of power like this, and then you recharge it after the water is dry.