How to deal with butterflies after they are caught, so that they can be used as specimens

Just put it in the book and do it.

<> make butterfly specimens is divided into 3 steps, and the tools to be prepared are wing-spreading plates, wing-spreading paper tapes, insect needles, pins, and tweezers.

Here are the detailed steps to make a butterfly specimen:

Steps.

Separate the butterfly wings.

Pinch the butterfly's chest, use tweezers to separate the wings, and pierce the insect needle vertically from the butterfly's back into the chest.

Pin fixation of butterflies.

Then the insect needle is pierced vertically into the middle of the groove of the wing plate, and the wing-spreading paper tape is covered on the wing, which is fixed with a pin.

Dry the butterflies. <>

After 3-4 weeks.

Wait until the butterfly is completely dry, and remove the specimen from the winged board.

Summary. Butterfly specimens are made by killing butterflies, which is a cruel thing. In addition to the use of natural dead butterfly individuals to make specimens and orthodox scientific research, the production of other butterfly specimens and even all animal specimens should be restricted and stopped to a certain extent.

Nowadays, we have entered the age of digital images, and many butterfly or insect lovers choose to use their cameras to record ecological images of their favorite creatures.

Butterfly specimens are all butterflies and then get them after they die.

Yes. Yes, except for the use of natural death butterfly specimens and orthodox scientific research on oak blending, the production of other butterfly specimens and even all animal specimens should be subject to a certain degree of restraint.

Butterfly specimens are made by killing butterflies, which is a cruel thing. In addition to the use of natural death omen and butterflies to make taxidermy and orthodox scientific research, the production of other butterfly specimens and even all animal specimens should be restricted and stopped to a certain extent. Nowadays, we have entered the era of ethnic disturbance digital images, and many butterfly and insect lovers choose to use their cameras to record ecological images of their favorite creatures.

You can poison the gas cylinder, and if you are troublesome, you can pinch your chest and disturb the stool liquid to execute it, and give it a good time. The lifespan of a butterfly is not long, but it still takes time for a natural death to be enviable, and it is easy to damage the wings when fluttering around

Summary. Hello dear, I'm happy to answer for you, the platform here for you to find the preservation method of butterfly specimens: 1. Take an ordinary needle directly, pass through the butterfly's cephalothorax, nail it to the board, and let it cool out to dry.

After drying, put it in a transparent box, put a mothball, and seal the seal with wax, which can be stored for many years. 2. Use two pieces of styrofoam, dig a narrow groove on it, the size is suitable for your butterfly's torso, put the butterfly on one of them, stretch its wings, align the other piece and press it up, press a heavy object on it, and put it on it for about a day and a night.

Hello dear dear, I am happy to answer for you, the platform here for you to find the preservation method of butterfly specimens: 1. Take an ordinary needle directly, pass through the cephalothorax of the butterfly, nail it to the board, and let it dry in the shade. After drying, put it in a transparent Min Chong box, put a mothball, and seal the seal with wax, which can be stored for many years.

2. Use two pieces of styrofoam, dig a narrow groove on it, the size is suitable for your butterfly bridge and torso, put the butterfly on one of them, stretch the wings, align the other piece and press it up, press a heavy object on it, and put it for about a day and a night.

Because butterflies are generally brightly colored, large butterflies are very eye-catching, so there are special people to collect various butterflies and make them into specimens for collection and research. There are about 14,000 species of butterflies in the world, most of which are distributed in the Americas, especially in the Amazon River Basin, and are distributed in other parts of the world except for the cold zone of the Antarctic and Antarctic branches.

Here's how to make a butterfly specimen:

Prepare tools: scissors, tweezers, winging plates, rulers, insect needles (you can use pins), wings with strips of paper.

Prepare the wings board: you can use a thick foam board instead, make a groove in the middle of the board, and the width and depth are according to the butterfly's body.

Procedure:1 Place the body of the butterfly into the groove of the winged plate.

2 Insert the needle vertically from the middle of the chest, if there is no special insect needle, you can also replace it with an extended pin or sewing needle, which should be about 20 mm higher than the butterfly's body.

3 Press the butterfly's wings, the back of the forewing, against the front of the hindwing, and the crossing line is perpendicular to the longitudinal length of the body.

4 Press down the butterfly wings with wing-spreading paper.

5 Use a needle to fix the wings and butterfly wings.

6 The needle should be inserted diagonally outward on the outer edge of the butterfly's wings and not damage the wings.

7. Spread one side and then the other.

8 After spreading the wings, press the antennae under the paper as well and fix them with a needle.

9 After completion, put it in the oven to dry, or you can bake it under a 40-watt bulb, but pay attention to have a distance from the spreading wing paper to prevent scorching, and the time is about 2-3 days.

11. The specimen should be placed in a dry, well-sealed specimen box, in which some camphor essence and desiccant (the right side of the box) can be placed, and the desiccant will be attached to some foods, and a few holes should be pricked with a needle, and then fixed in the box.

First of all, we need to prepare these tools: a butterfly, a pot of hot water, a box of pins, a foam board, two hard plastic splints, a hot melt adhesive, a pair of tweezers, a specimen box, and a few paper towels.

Step 1: Pour the hot water of about 80 degrees into the bowl-shaped container, making sure that the bowl mouth is large enough. Then gently grip the front chest of the butterfly with tweezers and immerse the butterfly's torso in hot water so that the water is submerged over the base of the wings.

Then, when the roots of the butterfly's wings become soft, take out the butterfly, absorb the water with a paper towel, and put it on the foam board to start arranging the shape. Pierce the butterfly's chest with a pin, secure it to the foam board, and slowly lay the wings flat and stretch to the ideal shape, taking care to be gentle or it will break.

Step 2: Use two plastic splints to flatten the butterfly wings in a posed position, and fix them along the edge of the wings with a pin, do not move the splints, otherwise the shape will be destroyed and the shape will be asymmetrical, and the wings will be torn apart.

Step 3: After the butterfly is fixed, put it in a ventilated position, you can remove the pin in about three to four days, heat it with hot melt glue and apply it in the specimen box, press the butterfly torso on the glue for one minute, adjust the posture, and you can seal it, so that the butterfly specimen is completed.

How to make butterfly specimens:

1. Collection utensils.

1) Insect trap net: Insect trap net is an indispensable basic wood tool for collecting butterflies and insects, which is composed of three parts: handle, mesh frame and screen. The screen frame is usually made with No. 8 zinc wire. Its diameter can be large or small, ranging from 30 cm to 60 cm.

The net is sewn with transparent soft gauze. It can also be retrofitted with old nylon mosquito nets, and the size of the net depends on the diameter of the net frame; The net depth must be twice the diameter of the frame. The handle is mostly made of bamboo poles, and its length should not exceed your own height is ideal.

2) Triangular paper and triangular box: triangular paper is used to wrap butterflies. It is best to use wax paper, and the size is less than thirty-two carats. A triangular box is a container for triangular paper. It can be replaced by any square carton.

2. Collection method.

After the butterfly is put into the insect trap, the net frame should be twisted immediately, so that the bottom of the net can hang on one side, so that the butterfly that enters the net can be prevented from flying away again, and the base and chest of the butterfly wings can be pinched with the thumb and index finger from outside the net as soon as possible, so that the butterfly can be stunned, which is to prevent the butterfly from struggling to break the beautiful wings in the net, and then the butterfly can be taken out and wrapped in the triangle paper.

3. Instruments for making specimens:

Tweezers are the most basic tools for making butterfly specimens, followed by insect needles, specimen boxes, paper strips and plastic foam boards. For any form of specimen, try to use forceps rather than pinching it directly with your hands, so that the scales on the wings are intact. High-grade tweezers are available in medical instrument stores**, but they can also be bought at hardware tool stores for very cheap handicraft tweezers.

It is best to use special insect needles to make butterfly specimens, but they are not easy to buy and the price is high, but they can be replaced by pins or sewing needles. Plastic foam board, also known as Bolilong, can also be replaced by a wooden cork layer, corrugated paper or wooden board, and used with paper strips when spreading wings.

Specimen boxes are also not readily available, but they can be replaced by any boxy paper or iron biscuit box with a layer of plastic foam at the bottom of the box, or any other substitute for pins.

Butterflies are beautiful insects, and making butterfly specimens allows us to better appreciate their beauty. Here are the steps to make a butterfly specimen.

Step 1: Collect butterflies.

First, fresh butterflies need to be collected. It is best to choose a butterfly that is intact and can be collected early in the morning or evening, when the butterflies are more active. After collection, place the butterflies in a plastic bag to avoid crushing the butterflies as much as possible.

Step 2: Prepare the specimen materials.

The materials needed to make butterfly specimens are: specimen paper, alcohol, pencils, tweezers, blades, scissors, etc. It is best to choose a material that is tough and does not fade easily, and the size is slightly larger than that of a butterfly.

Step 3: Make a specimen.

Roll the butterfly out of the plastic bag, gently grasp the key with tweezers to infiltrate the base of the butterfly's wings, and then carefully cut off the connecting part of the wing base with a blade, being careful not to cut off the entire wing.

Place the butterfly and flatten the wings. The wings can be fixed to the specimen paper with a thin iron wire or glued to the specimen paper with a small piece of scotch tape.

The body parts of the butterfly are coated with alcohol to keep them intact and embalmed.

Use a pencil on specimen paper to mark the name of the butterfly, the time and place of collection, and other information.

Trim the specimen paper to a suitable size with scissors and load it into a specimen box.

Step 4: Save the specimen.

Prepared butterfly specimens need to be placed in a cool, dry, and ventilated place, away from direct sunlight and moisture. If it is stored for a longer period of time, a small amount of desiccant can be placed in the specimen box.

Making a butterfly specimen requires a certain amount of patience and skill, but as long as you follow the steps above to prepare for the journey, you can make a beautiful butterfly specimen and appreciate the beauty of the butterfly.