How to remove dirt from stainless steel electric kettle

Updated on home 2024-03-06
11 answers
  1. Anonymous users2024-02-06

    Removal of limescale:

    1. Put some paper scraps in the bottle, then pour in warm salt water, shake gently for a while, and the scale can be removed.

    2. You can pour about 500 grams of baking soda with a concentration of 1%, or heat the vinegar into the bottle, shake it gently, and the scale can be removed.

    3. Slightly break the two egg shells, put them into the bottle, then fill the half tea jar with cold water, plug the bottle cork and hold it down with one hand, hold the neck of the bottle mouth with your thumb and other fingers, and hold the bottom of the bottle with the other hand, and rotate and shake it up and down, left and right. After about 20 seconds, remove the cork, pour out the eggshell, and rinse twice with water.

    4. Use 250 grams of vinegar, heat it and pour it into the hot water bottle, soak it for a few hours, and then shake it up and down, left and right, and the scale in the bottle will fall off.

    5. Take 200 grams of dilute hydrochloric acid and soak it in the bottle for a while, and then shake it to remove the scale in the bottle.

    6. Pour the water in which the noodles are boiled into the bottle, shake for a few minutes, pour it out, and rinse it with water to clean it.

    7. Take some sunshine leaves or pumpkin leaves and cut them into pieces of 3 cm to 4 cm square, put them in the bottle, add a little cold water, gently shake the hot water bottle a few times, pour it out and then wash it with water.

  2. Anonymous users2024-02-05

    Put a little vinegar in the kettle, heat it, the limescale will dissolve, rinse with clean water.

  3. Anonymous users2024-02-04

    Hydrochloric acid or vinegar is fine.

  4. Anonymous users2024-02-03

    Soak in white vinegar for a while before washing.

  5. Anonymous users2024-02-02

    With vinegar hydrochloric acid is too acidic,

  6. Anonymous users2024-02-01

    hydrochloric acid, but after using it I want you to rinse it off.

  7. Anonymous users2024-01-31

    Stainless steel kettle is a good tool for boiling water at home, stainless steel kettle has many advantages, but it will be scaled after a long time, so what are the ways to remove stainless steel kettle scale? The following are a few of them, just for your reference:

    1. Vinegar to remove scale.

    The stainless steel kettle has been used for a long time, and there will be scale in the kettle, the composition of scale is mainly composed of carbonates such as calcium carbonate, you can put some vinegar in the stainless steel kettle, and the acetic acid in the kettle reacts with calcium carbonate, and the scale can be removed.

    2. Baking soda removes limescale.

    Since the stainless steel electric water pot heating plate is made of aluminum, after heating, the kettle ground will form scale, you can use baking soda to remove scale in life, put 1 teaspoon of baking soda in the stainless steel kettle, boil for a few minutes, and the scale will be removed. Or you can also pour about 500 grams of baking soda with a concentration of 1%, shake it gently, and the scale can be removed.

    3. Chickens touch the eggshell to remove scale.

    The common method of removing scale in the family is to break the egg shell and put it in a stainless steel kettle, pour a few drops of detergent and an appropriate amount of boiling water, plug the cork and hold it down with one hand, rotate and shake it up and down, left and right, rinse it with water, and generally wash off the scale in the stainless steel kettle.

    4. Tea leaves remove scale.

    Generally, you can use the tea leaves in the leftover tea, pour the remaining tea residue and hot water into the stainless steel kettle, shake it up and down and left and right for a few times, and place it for half an hour, and the scale in the stainless steel kettle will naturally fall off under the action of theophylline.

  8. Anonymous users2024-01-30

    1. Vinegar to remove scale.

    This method is the simplest and most practical method, we all know that the main component of scale is calcium carbonate and other carbonates, the acetic acid in the vinegar will react with it, producing minerals and carbon dioxide gas dissolved in water, white vinegar can be bought in general supermarkets, put in the kettle scale of 10 slow round white vinegar, then fill the cover with water, boil and leave for about an hour, and then brush it, aged vinegar can also be, but the effect of aged vinegar is not as good as white vinegar.

    Second, the electric kettle boils the potato to remove scale.

    In the new electric kettle, put more than half a kettle of yams, fill up with water, cook the yams, and then boil the water later, so that there will be no limescale. However, it should be noted that after boiling the potato, the inner wall should not be scrubbed, otherwise it will lose its descaling effect. For the old kettle that has been full of limescale, after boiling it once or twice with the above method, not only the original scale will gradually fall off, but also can play a role in preventing the accumulation of scale.

    3. Baking soda removes limescale.

    When the electric kettle boils water, it is easy to form scale, generally we can put 1 teaspoon of baking soda, boil for a few minutes, and the scale will be removed. Or you can pour about 500 grams of baking soda with a concentration of 1%, shake it gently, and the scale can be removed.

    Fourth, boiled eggs to remove scale.

    General electric kettle, with a long time of hard dirt is difficult to remove, such as boiling eggs twice with it, will receive the ideal effect, the two egg shells slightly broken, put into the bottle, and then fill half a pot of water, stir with a blender or spoon, and then boil, put for about half an hour, pour out the eggshell, and then wash twice with water. Scrambled skin collapse.

  9. Anonymous users2024-01-29

    The scale in the stainless steel kettle can be poured with some baking soda or white vinegar, then add water to boil, after boiling, let the solution stand in the kettle for a period of time to soften the scale, and then brush. Excessive scale in stainless steel will reduce the efficiency of the kettle, so once the scale is found, it must be cleaned in time.

    If there is scale after the stainless steel kettle is boiled, it means that the water quality at home is hard, and the water contains more calcium, magnesium and other mineral components.

    Generally speaking, scale will be more afraid of acidic substances, and once it encounters acidic substances, it will dissolve directly, which will be more convenient for subsequent cleaning.

    The main components of limescale are calcium carbonate, magnesium carbonate, calcium sulfate, magnesium sulfate, calcium chloride, magnesium chloride, etc., once it enters the drinking water, it will endanger human health, so it needs to be cleaned.

  10. Anonymous users2024-01-28

    The method of scale treatment of kettle: vinegar to remove scale, leftover tea to remove scale, boiled sweet potato can prevent scale, potato peel to remove scale, lemon scale.

    1. Vinegar to remove scale.

    You can pour a small amount of water into the kettle, then add some white vinegar, boil for an hour or two, then scrub it off and the limescale is gone. This is because the scale is made up of carbonates such as calcium carbonate, and the acetic acid in the vinegar reacts with it to produce minerals and carbon dioxide gas that dissolve in water, so the scale can be removed.

    2. Remove limescale from the remaining tea leaves.

    Pour the tea residue and hot water into the shop kettle, shake it a few times, and leave it for half an hour, after which the limescale will come off automatically. This is because theophylline removes limescale.

    3. Boiling sweet potatoes can prevent limescale.

    Put more than half a kettle of sweet potatoes in the kettle, then fill it with water and cook the sweet potatoes. In the future, there will be no limescale in the kettle. Do not rub the inner wall of the sweet potato after boiling, otherwise it will lose the effect of removing limescale.

    If it is an old kettle, use sweet potatoes to remove scale, and remove it twice more before the scale will gradually fall off.

    4. Remove limescale from potato skin.

    Put the potato skins in the electric kettle, pour in the water and boil until the water boils, and let it sit for a few minutes to clean the limescale in the kettle. If it is not cleaned at one time, you can use the potato peel to boil water several times, and the scale can be completely cleaned.

    5. Limescale at the lemon.

    Chop the lemon and put it in the kettle, fill it up and let it sit overnight, then wash the kettle the next day. Note that if there is less limescale, you can put half a lemon, and if you put an extra lemon in the limescale, you can completely remove the limescale.

  11. Anonymous users2024-01-27

    1. Baking soda to remove scale, when boiling water in a kettle with scale, put 1 teaspoon of baking soda, boil for a few minutes, and the scale will be removed.

    2. Boil the yam to remove the scale, put more than half a kettle of yams, fill it with water, cook the yams, and then boil the water in the future, so that there will be no scale.

    3. Boiled eggs are scaled and boiled twice in a kettle with scale, and the desired effect will be obtained.

    4. Vinegar to remove scale, the kettle has scale, you can put a few evenly vinegar into the water, boil for one or two hours, and the scale will be removed.

    5. Mask descaling, put a clean mask in the kettle, when boiling water, the scale will be adsorbed by the mask.

Related questions
11 answers2024-03-06

The cleaning methods of the countertop are not the same, and the cleaning methods of the stainless steel countertop are as follows. >>>More

9 answers2024-03-06

There are two methods, one is to use passivation paste, which is specially used to clean short stainless steel welds, which only need to be applied to the weld for 20 minutes and wiped off; The other is for more welds, first put the workpiece into the mixture of nitric acid and hydrofluoric acid to soak and clean for 15 minutes, take it out and rinse it with water, and then put it into nitric acid to passivate for 20 minutes, take it out and rinse it clean.

3 answers2024-03-06

Differences: 1. Different degrees of corrosion resistance: 316 stainless steel contains MO, which has better corrosion resistance than 304 stainless steel in a high-temperature environment, so in a high-temperature environment, engineers generally choose 316 material parts. >>>More

10 answers2024-03-06

1: Grade 2507 duplex stainless steel.

Two: chemical composition. >>>More

10 answers2024-03-06

430 stainless steel is a general steel grade with good corrosion resistance, better thermal conductivity than austenite, smaller thermal expansion coefficient than austenite, heat fatigue resistance, addition of stabilized element titanium, and good mechanical properties of weld parts. 430 stainless steel is used for building decoration, fuel burner parts, household appliances, and home appliance parts. Stainless iron 430 does not contain nickel, is magnetic, and is prone to rust. >>>More