Urgent: ASUS U5F The CPU temperature of this laptop is high

This small book of ASUS is like this,The design is relatively compact,My friend used to use ASUSU5,The keyboard is a little hot after running for a few hours,The machine can withstand the blue screen of death on the line,This book has been used for so many years,It's not okay to play games,Just chat,Watch movies。

Hello! The CPU temperature is best between 25-55 degrees. The CPU temperature is within 70, and the CPU surface temperature of 75-85 is the warning temperature, but it will not burn the CPU.

The normal temperature of the CPU is guaranteed to be stable within the range of 30 degrees Celsius. In other words, the CPU can withstand a temperature of 65 degrees, and the maximum temperature of the CPU is 30 degrees Celsius based on the maximum temperature of 35 degrees in summer. And so on, if your ambient temperature is 20 degrees now, it's best not to exceed 50 degrees on the CPU.

When the temperature is too high, it is recommended that you raise the bottom of the laptop or add a cooling base to keep the ventilation smooth; Or try to see if there is any unsafe software, and then turn off the startup items that are not commonly used, the method is as follows: Press the win r key combination to call the run window, enter msconfig, click OK, select "Start" to select the card, cancel the loader you don't need to boot, and then OK, you can turn off the boot startup of this program.

If your CPU is AMD, then it's normal, ASUS's laptop is not good as long as it's AMD's heat dissipation, but AMD itself generates a lot of heat, and my laptop is also AMD's, and the CPU temperature is about the same as yours. If you are not at ease, you can go to the after-sales service and let them test it, for free!

You can't help it, smart is installing an outside laughing fan.

The high CPU temperature is mostly caused by insufficient heat dissipation due to the high dust of the computer host.

Analyze the specific solution specifically:

1.If there is too much dust, it is recommended to disassemble the machine directly to clean the ash, re-insert each cutting, and then clean the dust in the card slot and plug it in.

If there is too much dust or aging of the fan, if there is too much dust, clean the ash directly, if the fan is aging and there is a failure of insufficient heat dissipation, you can only replace it with a new cooling fan.

3.Reapply the heat dissipation paste, also known as heat dissipation silicone, to improve the heat transfer effect.