DIY fish tank problem, how to make your own fish tank

Updated on home 2024-03-12
3 answers
  1. Anonymous users2024-02-06

    Landlord, you are mistaken, there is no direct sticking safety in the hot bend. The force of the two bonded glasses in the fish tank far exceeds that of the hot bend, which has been tested by experts in this forum.

    You want to bend hot, if the glass factory has that size mold, it's cheaper, if you don't know how to make a mold, it's less than tens of thousands, more than a million.

    If you want to make a self-made hot bend, it is better to buy the finished product directly, which is about 400 yuan, and the finished product has a cylinder of your size, I have seen Jiabao and Yuemei.

    Of course, it is the bottom, and now there are very few bottoms and edging in the cylinder, all of which are side wrapping.

    A 1m cylinder can only be regarded as a medium cylinder.

    If you have money to filter, use the filter bucket, because it is half of the fish and grass, and the filter bucket is beneficial to the growth of the grass.

    If you don't have money, you can filter it, do it on the left or right side of the tank, you can't do the back filter, 45 wide to do the back filter on the net about 35 wide, it has become an ecological tank, and the scenery is very difficult.

  2. Anonymous users2024-02-05

    1. Tools Raw materials: masking tape, knife, filter box.

    The first is to cut the glass, to use the best knife, the scale measured before the knife should be accurate, before the knife can be dipped in a little oil with a brush, painted on the glass under the knife, and then under the knife.

    2. Then use a grinding stone to grind the edge, to grind into a rough surface, in the production of the aquarium called this procedure "grinding mouth".

    3. Then paste the masking tape, in order to reinforce the glue, it is best to remember to paste the masking tape twice, look at the glue seam, it is very neat!

    4. Then there is the baffle plate of the corner filter, and the water baffle is glued inside the corner filter, and you have to look at the glue seam of the corner filter.

    5. Take a look at the effect, as shown in the figure below.

  3. Anonymous users2024-02-04

    Summary. A: In response to this problem, we can say that it is okay to change the small fish tank, but there are some things to pay attention to.

    First of all, make sure that the size and shape of the small fish tank is suitable for the size of the fish so that the fish are not adversely affected. Secondly, it is necessary to ensure that the water quality of the small fish tank meets the requirements of the fish to avoid contamination of the fish. Finally, make sure that the temperature and humidity of the small tank meet the requirements of the fish so that the fish are not adversely affected.

    To change a small fish tank, first prepare the required materials, including a new small fish tank, water filter, aquatic plants, stones, etc. Secondly, put the fish in the large tank into the new small tank and make sure that the fish are safe. Then, the new small fish tank should be decorated, aquatic plants, stones, etc. should be put into the small fish tank, and a water filter should be installed.

    Finally, adjust the water temperature, humidity, and water quality in the small fish tank to suit the requirements of the fish, and then put the fish into the small fish tank, and you're good to go.

    Answer: In response to this question, we can say that it is okay to change the small fish tank, but there are some things to pay attention to. First of all, make sure that the size and shape of the small fish tank is suitable for the size of the fish so that the fish are not adversely affected.

    Secondly, it is necessary to ensure that the water quality of the small fish tank meets the requirements of the fish to avoid contamination of the fish. Finally, make sure that the temperature and humidity of the small tank meet the requirements of the fish so that the fish are not adversely affected. To replace the small fish tank, Zha Ming must first prepare the required materials, including a new small fish tank, water filter, aquatic plants, stones, etc.

    Secondly, put the fish in the large tank into the new small tank and make sure that the fish are safe. Then, the new small fish tank should be decorated, and the aquatic plants and stones should be put into the small fish tank of the sedan chair, and the water filter should be installed. Finally, adjust the water temperature, humidity, and water quality in the small fish tank to suit the requirements of the fish, and then put the fish into the small fish tank, and you're good to go.

    Can you tell us more about that?

    In response to this problem, we can say that it is not a good choice to change a large fish tank to a small fish tank. First of all, changing a large fish tank to a small fish tank will bring discomfort to the fish, because the space needs of the fish are limited, if the space is too small, the fish will feel depressed, which will affect their growth and development. Secondly, changing a large fish tank to a small fish tank will affect the water quality, because the large fish tank has more water than the small fish tank, and the water quality is easier to maintain stability, while the small fish tank has less water and the water quality is more susceptible to external influences, thus affecting the health of the fish.

    In addition, changing a large fish tank to a small fish tank will also affect the living habits of the fish, because the large fish tank provides more space for activities, and the fish can swim freely, while the small fish tank has limited space, and the fish may feel depressed, thus affecting their normal living habits. In short, it is not a good choice to replace a large fish tank with a small fish tank, because it will bring discomfort to the fish, affect the water quality, and affect the living habits of the fish. Therefore, when changing fish tanks, you should choose the right fish tank according to the space needs of the fish, so as to ensure that the fish are talkative and healthy and have a good living environment.

Related questions
8 answers2024-03-12

1. Use a clean basin first, fill it with water, and leave it for 1-2 days, so as to facilitate the volatilization of chlorine in the tap water, so as not to affect the health of the fish. Mul. >>>More

24 answers2024-03-12

The water quality environment in the fish tank is good, so that the fish can be raised for a long time, and the fish can grow beautiful and healthy. Of course, improving the water quality of the fish tank and raising the water is not just a matter of talking. In the process of feeding, it is necessary to implement specific things, improve the water quality of the fish tank through actual breeding, and raise a tank of good water and good fish. >>>More

6 answers2024-03-12

The easiest and most useful way to use is to put tap water in the bathtub for a few days and you will have good water!

5 answers2024-03-12

<>1, home Zen fish tank placement - do not go too high: generally the bathtub is placed at home, pay attention to height control, according to Feng Shui, the fish tank is water, do not commit "no top water", which is not good for people's fortune. Ping Jing Ju often place it in a way that does not exceed your own height, so as not to cause damage to your fortune at home and also have an impact on the overall feng shui. >>>More

11 answers2024-03-12

incubation methods; In order to have a high hatching rate, the water temperature of the hatchery tank should not exceed the temperature of the spawning tank!! >>>More